Potassium hydroxide synthesis

Potassium hydroxide Synthesis of carboxylic acids from hydroxycarboxylic acids... 

Silver nitrate/potassium hydroxide Synthesis of hydrocarbons from horanes s. 16, 753... 

Synthesis of (A) started with the combination of 2,4,6-trimethylphenol and allyl bromide to give the or/Ao-allyl dienone. Acid-catalyzed rearrangement and oxidative bydroboration yielded the dienone with a propanol group in porlactone ring were irons in the product as expected (see p. 275). Treatment with aqueous potassium hydroxide gave the epoxy acid, which formed a crystalline salt with (R)-l-(or-naphthyl)ethylamine. This was recrystallized to constant rotation. 

The most widely used method for the preparation of carboxylic acids is ester hydrolysis. The esters are generally prepared by heterocyclization (cf. Chapter II), the most useful and versatile of which is the Hantzsch s synthesis, that is the condensation of an halogenated a- or /3 keto ester with a thioamide (1-20). For example ethyl 4-thiazole carboxylate (3) was prepared by Jones et al. from ethyl a-bromoacetoacetate (1) and thioformamide (2) (1). Hydrolysis of the ester with potassium hydroxide gave the corresponding acid (4) after acidification (Scheme 1). 

The last step in the synthesis of divinyl ether (used as an anesthetic under the name Vinethene) involves heating CICH2CH2OCH2CH2CI with potassium hydroxide Show how you could prepare the necessary starting material CICH2CH2OCH2CH2CI from ethylene... 

Ma.nufa.cture. In general, manufacture is carried out in batch reactors at close to atmospheric pressure. A moderate excess of finely divided potassium hydroxide is suspended in a solvent such as 1,2-dimethoxyethane. The carbonyl compound is added, followed by acetylene. The reaction is rapid and exothermic. At temperatures below 5°C the product is almost exclusively the alcohol. At 25—30°C the glycol predominates. Such synthesis also... 

Nitromethane also is used in the synthesis of the antiulcer dmg, ranitidine [66357-35-5]. A two-step process utilizing nitromethane, carbon disulfide, potassium hydroxide, and dimethyl sulfate yields l,l-bis(methylthio)-2-nitroethene [13623-94 ] which reacts further to produce ranitidine. 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

An alternative synthesis route for PES involves the partial hydrolysis of dichlorodiphenyl sulfone (2) with base to produce 4-chloro-4 -hydroxydiphenylsulfone [7402-67-7] (3) followed by the polycondensation of this difimctional monomer in the presence of potassium hydroxide or potassium carbonate (7). 

Typical values for mf n are 0.5 to 2.5. Gommercially used bases include sodium hydroxide, potassium hydroxide, calcium hydroxide (lime), magnesium hydroxide, sodium carbonate, sodium alurninate, calcium carbonate, or various mixtures. For certain appHcations, PAG can be made from waste grades of aluminum chloride [7446-70-0] such as spent catalyst solutions from Friedel-Grafts synthesis (see Friedel-Grafts reaction). 

The direct synthesis of o.g-unsaturated nitriles can be accomplished by treating the appropriate carbonyl compound with potassium hydroxide in... 

The synthesis of 1-ethoxy-1-butjme has been reported previously, but the preparations have required multistep sequences. Two of the procedures use 1,2-dibromo-l-ethoxy butane which is dehydrohalogenated in two successive steps, first by an amine base and then by either powdered potassium hydroxide or sodium amide no yields are given. The... 

There are three general methods of interest for the preparation of vinyl chloride, one for laboratory synthesis and the other two for commercial production. Vinyl chloride (a gas boiling at -14°C) is most conveniently prepared in the laboratory by the addition of ethylene dichloride (1,2-dichloroethane) in drops on to a warm 10% solution of sodium hydroxide or potassium hydroxide in a 1 1 ethyl alcohol-water mixture Figure 12.1). At one time this method was of commercial interest. It does, however, suffer from the disadvantage that half the chlorine of the ethylene dichloride is consumed in the manufacture of common salt. 

The new /-hydrastine is considered to be /-a-hydrastine and natural hydrastine to be /- -hydrastine, which implies (1) that the latter differs from natural narcotine (/-a-narcotine) in stereochemical configuration (2) that since a-gnoscopine, but not -gnoscopine, can be resolved, the synthesis of natural hydrastine will involve the deracemisation of hydra-stine-b, to /-a-hydrastine, which can be epimerised to natural hydrastine (/- -hydrastine) by boiling with methyl-alcoholic potassium hydroxide. 

This formula was confirmed hy Haworth and Perkin s synthesis of a-flZZocryptopine from herherine, the first application of a process, of which examples have heen given already in the syntheses of cryptopine (p. 298) and protopine (p. 301) hy the same authors. Anhydrotetrahydromethyl-herherine (I cf. hase (a), p. 346) in dry chloroform was added to a solution of perhenzoic acid in ether cooled helow 5°. The amine oxide, C21H23O5N (II), separated as an oil, which after shaking with sodium hydroxide solution, solidified and was crystallised from water in slender prisms, m.p. 135°. It was dissolved in acetic acid, hydrochloric acid added, the mixture heated in boiling water for an hour and the hase precipitated hy addition of potassium hydroxide. The precipitate was dissolved in methyl alcohol, ether added, the alcohol washed out with water and the ethereal... 

B. HCl, m.p. 242-3°). The methiodide, m.p. 104-7°, of this, on treatment with potassium hydroxide in methyl aleohol, yielded 5 6-pimethoxy-8-vinylphenanthrene, m.p. 86-7°, along with dimethyl-de-iV-methylnorroemerine, oil, [aju + 13-55° (EtOH) the methiodide, m.p. 278°, of this, on like treatment also yielded 5 6-dimethoxy-8-vinyl-phenanthrene, whose identity was established by its oxidation by permanganate to 5 6-dimethoxyphenanthrene-8-earboxylie aeid. Rcemerine is, therefore, 5 6-methylenedioxy-iV-methylaporphine, and this eon-stitution has been confirmed by Marion and Grassie s synthesis of the alkaloid. 

These formulae explain the scission products of the two alkaloids and the conversion of evodiamine into rutaecarpine, and were accepted by Asahina. A partial synthesis of rutaecarpine was effected by Asahina, Irie and Ohta, who prepared the o-nitrobenzoyl derivative of 3-)3-amino-ethylindole-2-carboxylic acid, and reduced this to the corresponding amine (partial formula I), which on warming with phosphorus oxychloride in carbon tetrachloride solution furnished rutaecarpine. This synthesis was completed in 1928 by the same authors by the preparation of 3-)S-amino-ethylindole-2-carboxylic acid by the action of alcoholic potassium hydroxide on 2-keto-2 3 4 5-tetrahydro-3-carboline. An equally simple synthesis was effected almost simultaneously by Asahina, Manske and Robinson, who condensed methyl anthranilate with 2-keto-2 3 4 5-tetrahydro-3-carboline (for notation, see p. 492) by the use of phosphorus trichloride (see partial formulae II). Ohta has also synthesised rutaecarpine by heating a mixture of 2-keto-2 3 4 5-tetrahydrocarboline with isatoic anhydride at 195° for 20 minutes. 

A mixture of 23 parts of the ethyl ester of 4 phenylisonipecotic acid and 15 parts of 2,2-diphenyl-4-bromobutyronitrile in 19 parts of xylene is heated for 24 hours at 100°-120°C and then cooled and filtered to remove the precipitate of the hydrobromide of the ethyl ester of 4-phenylisonipecotic acid. The filtrate is then extracted with dilute hydrochloric acid and the extract is rendered alkaline by addition of concentrated aqueous potassium hydroxide and extracted with ether. This ether extract is treated with gaseous hydrogen chloride. The resulting precipitate is collected on a filter. The hydrochloride of the ethyl ester of 2,2 diphenyl-4-(4 -carboxy-4 -phenyl-1 -piperidino) butyronitrile thus obtained melts at about 220.5-222°C. See Meperidine hydrochloride for synthesis of 4-phenyl-isonipecotic acid ethyl ester. 

Synthesis of 9-oxo-11 CH,1 Sol-bis-(2-tetrahydropyranytoxy)-16,16-dimethyl-prosta-trans-2, trans-13-dienoicacid 4gof ethyl 9a-hydroxy-1 la,1 5a-bis-(2-tetrahydropyranyloxy )-16,16-dimethyl-prosta-trans-2,trans-13-dienoate were dissolved In 130 ml of a mixture of ethanol-water (3 1), mixed with 3.9 g of potassium hydroxide and stirred at 25°C for 2 hours. The reaction mixture was acidified with aqueous solution of oxalic acid to pH 5, and diluted with 100 ml of water, extracted with ethyl acetate. The extracts were washed with water, dried over sodium sulfate and concentrated under reduced pressure to obtain 3,88 g of 90 -hydroxy-11a,15a-bis-(2-tetrahydropyranyloxy)-16,16-dimethyl-prosta-trans-2,trans-13-dienoic acid. 

Diacetamldo-2,4,6-triiodobenzoic acid (diatrizoic acid) (see Diatrizoate entry for synthesis) (10 g) is suspended in water (10 ml), 5 N potassium hydroxide (4.3 equivalent) is added and the mixture cooled to about 15°C. Dimethyl sulfate (0.5 equivalent) dissolved in an equal volume of acetone is added drop by drop while stirring. After the reaction mixture has... 

As a demonstration of the complete synthesis of a pharmaceutical in an ionic liquid, Pravadoline was selected, as the synthesis combines a Friedel-Crafts reaction and a nucleophilic displacement reaction (Scheme 5.1-24) [53]. The allcylation of 2-methylindole with l-(N-morpholino)-2-chloroethane occurs readily in [BMIM][PF6] and [BMMIM][PF6] (BMMIM = l-butyl-2,3-dimethylimida2olium), in 95-99 % yields, with potassium hydroxide as the base. The Friedel-Crafts acylation step in [BMIM][PF6] at 150 °C occurs in 95 % yield and requires no catalyst. 

The structural homology between intermediate 4 and isostrych-nine I (3) is obvious intermediates 3 and 4 are simply allylic isomers and the synthetic problem is now reduced to isomerizing the latter substance into the former. Treatment of 4 with hydrogen bromide in acetic acid at 120°C results in the formation of a mixture of isomeric allylic bromides which is subsequently transformed into isostrychnine I (3) with boiling aqueous sulfuric acid. Following precedent established in 194810 and through the processes outlined in Scheme 8a, isostrychnine I (3) is converted smoothly to strychnine (1) upon treatment with potassium hydroxide in ethanol. Woodward s landmark total synthesis of strychnine (1) is now complete. 

We have now reached a critical stage in the synthesis. The action of 0.1 n potassium hydroxide in 3 1 methanol water on intermediate... 

A cursory inspection of key intermediate 8 (see Scheme 1) reveals that it possesses both vicinal and remote stereochemical relationships. To cope with the stereochemical challenge posed by this intermediate and to enhance overall efficiency, a convergent approach featuring the union of optically active intermediates 18 and 19 was adopted. Scheme 5a illustrates the synthesis of intermediate 18. Thus, oxidative cleavage of the trisubstituted olefin of (/ )-citronellic acid benzyl ester (28) with ozone, followed by oxidative workup with Jones reagent, affords a carboxylic acid which can be oxidatively decarboxylated to 29 with lead tetraacetate and copper(n) acetate. Saponification of the benzyl ester in 29 with potassium hydroxide provides an unsaturated carboxylic acid which undergoes smooth conversion to trans iodolactone 30 on treatment with iodine in acetonitrile at -15 °C (89% yield from 29).24 The diastereoselectivity of the thermodynamically controlled iodolacto-nization reaction is approximately 20 1 in favor of the more stable trans iodolactone 30. 

---