Polyphenylenes, aromatic

This method of determining grafting efficiency proved successful since SiMe3 groups on polystyrene appear at 10.1 to 10.3 t by NMR while the SiMe3 groups on the polyphenylene aromatic ethers appear at 10.4 r. 

Aromatic Resonance stability Polyphenylene, aromatic polyamide... 

Polypropylene has a chemical resistance about the same as that of polyethylene, but it can be used at 120°C (250°F). Polycarbonate is a relatively high-temperature plastic. It can be used up to 150°C (300°F). Resistance to mineral acids is good. Strong alkalies slowly decompose it, but mild alkalies do not. It is partially soluble in aromatic solvents and soluble in chlorinated hydrocarbons. Polyphenylene oxide has good resistance to ahphatic solvents, acids, and bases but poor resistance to esters, ketones, and aromatic or chlorinated solvents. 

The successful development of polyfethylene terephthalate) fibres such as Dacron and Terylene stimulated extensive research into other polymers containing p-phenylene groups in the main chain. This led to not only the now well-established polycarbonates (see Chapter 20) but also to a wide range of other materials. These include the aromatic polyamides (already considered in Chapter 18), the polyphenylene ethers, the polyphenylene sulphides, the polysulphones and a range of linear aromatic polyesters. 

In 1968 the Monsanto Company announced the availability of novel soluble low molecular weight polyphenylene resins. These may be used to impregnate asbestos or carbon fibre and then cross-linked to produce heat-resistant laminates. The basic patent (BP 1037111) indicates that these resins are prepared by heating aromatic sulphonyl halides (e.g. benzene-1,3-disulphonyl dichloride) with aromatic compounds having replaceable nuclear hydrogen (e.g. bisphenoxy-benzenes, sexiphenyl and diphenyl ether). Copper halides are effective catalysts. The molecular weight is limited initially by a deficiency in one component. This is added later with further catalyst to cure the polymer. 

A stable material in humid conditions at temperatures up to 105°C, polyphenylene oxide is resistant to most aqueous solutions of acids and alkalis but is attacked by many organic solvents, particularly by aromatics and chlorinated aliphatics. 

Of particular synthetic importance is the coupling of aryl- and hetarylboronic acids to aryl- and hetaryl halides (or triflates), allowing for a convenient synthesis of biphenyls, even sterically demanding derivatives such as 14, hetaryl phenyls and Zj/ -hetaryls. With appropriately disubstituted aromatic substrates, the Suzuki coupling reaction can be applied in the synthesis of polyphenylene materials. 

A carboxylate derivative of a fully aromatic, water-soluble, hyperbranched polyphenylene is considered as a unimolecular micelle due to its ability to complex and solubilize non-polar guest molecules [23]. The carboxylic acid derivative of hyperbranched polyphenylene polymer (HBP) (My,=5750-7077, Mn=3810-3910) consists of 40-60 phenyl units that branch outward from a central point forming a roughly spherical molecule with carboxylates on the outer surface. The free acid form of HBP was suspended in distilled water and dissolved by adding a minimum quantity of NaOH. The solution was adjusted to pH 6.2 with aqueous HCl. Calcium carbonate crystals were growth from supersaturated calcium hydrogencarbonate solution at room temperature. HBP gave... 

Engineering polymers are often used as a replacement for wood and metals. Examples include polyamides (PA), often called nylons, polyesters (saturated and unsaturated), aromatic polycarbonates (PCs), polyoxymethylenes (POMs), polyacrylates, polyphenylene oxide (PPO), styrene copolymers, e.g., styrene/ acrylonitrile (SAN) and acrylonitrile/butadiene/styrene (ABS). Many of these polymers are produced as copolymers or used as blends and are each manufactured worldwide on the 1 million tonne scale. 

Watt and Drummond, were considered to be inert for C-C bond forming reactions. However, by the expedient of transmetallation to Cu, Ni, Zn, Li, and Al, methodologies for the stereoselective synthesis of olefins and dienes, as well as unusual heterocycles, aromatics and their ring-annulated products are now available which are beginning to make impact on material science, e. g. synthesis of pentacenes and polyphenylenes. Takahashi and Li provide evidence that, with further developments in transmetallation and handling the zirconacycles outside of the Schlenk tube techniques, synthetic utility will increase and new catalytic reactions will be developed. 

Dendrimers, or arborols, or cascade, or cauliflower, or starburst polymers, were first synthesized in the early 1980s [3,4]. In 1985 Tomalia et al. [5] and Newkome et al. [6] presented the first papers dealing with dendrimers. A multitude of dendrimers have been presented in the literature ranging from polyami-doamine [7,8],poly(propylene imine) [9,10], aromatic polyethers [11-13] and polyesters [14, 15], aUphatic polyethers [16] and polyesters [17], polyalkane [18-19], polyphenylene [20], polysilane [21] to phosphorus [22] dendrimers. Combinations of different monomers as well as architectural modifications have also been presented. For example, chirality has been incorporated in dendrimers [23,24]. Copolymers of linear blocks with dendrimer segments (dendrons) [25-27] and block-copolymers of different dendrons have been described [28]. 

The thermal stability of hyperbranched polymers is related to the chemical structure in the same manner as for linear polymers for example, aromatic esters are more stable than aliphatic ones. In one case, the addition of a small amount of a hyperbranched polyphenylene to polystyrene was found to improve the thermal stability of the blend as compared to the pure polystyrene [31]. 

Semi-aromatic PAs generally have a weak and slow absorption of water, a high rigidity, and are claimed to be more resistant to weathering and oils. For example, properties of polyphthalamides are intermediate between those of PA 66 and polyphenylene sulfide (PPS). 

Polyphenylene oxide and polyphenylene ether are oxides or ethers like polyoxymethylene but an aromatic unit replaces the methylene group leading to — ( — C6H4 — O—) — Polyphenylene ether has too high a glass transition temperature to be easily processed and is marketed in the form of alloys with other resins, such as ... 

At room temperature, polyphenylene sulfide generally resists most alcohols, aliphatic and aromatic hydrocarbons, greases, oils, gasoline, ketones, esters, ethers, glycols. 

We are able to functionalize our polyphenylene dendrimers via three different methods the use of functionalized cyclopentadienones, polymer-analogous reactions (group conversions), and electrophilic aromatic substitution. 

Scheme 16. Functionalization via electrophilic aromatic substitution of unsubstituted polyphenylene dendrimers...

A key feature of our polyphenylene dendrimers is that they can be planarized and thus reduced in dimensionality by intramolecular dehydrogenation [29,35]. This results in large, fused polycyclic aromatic hydrocarbons (PAHs). PAHs serve as structurally distinct, two-dimensional subunits of graphite and show attractive properties such as high charge carrier mobility, liquid crystallinity, and a high thermal stability, which qualifies these materials as vectorial charge transport layers [81]. 

Koch [82] and optimized further by us. The polyphenylene 28, which represents a first-generation dendrimer, forms 28 new bonds yielding the planar polycyclic aromatic hydrocarbon 56 (Scheme 23). Owing to its extreme insolubility in all common solvents, PAH 56 is characterized by laser desorption mass spectrometry based on its M+ peak at miz =1621. 

Scheme 23. Planarization of polyphenylene dendrimers yielding two-dimensional polycyclic aromatic hydrocarbons (PAHs)...

Hyperbranched polymers are formed by polymerization of AB,-monomers as first theoretically discussed by Flory. A wide variety of hyperbranched polymer structures such as aromatic polyethers and polyesters, aliphatic polyesters. polyphenylenes, and aromatic polyamides have been described in the literature. The structure of hyperbranched polymers allows some defects, i.e. the degree of branching (DB) is less than one. The synthesis of hyperbranched polymers can often be simplified compared to the one of dendrimers since it is not necessary to use protection/deprotection steps. The most common synthetic route follows a one-pot procedure " where AB,-monomers are condensated in the presence of a catalyst. Another method using a core molecule and an AB,-monomer has been described. ... 

Aromatic cyclic chains are more stable than aliphatic catenated carbon chains at elevated temperatures. Thus linear phenolic and melamine polymers are more stable at elevated temperatures than polyethylene, and the corresponding cross-linked polymers are even more stable. In spite of the presence of an oxygen or a sulfur atom in the backbones of polyphenylene oxide (PPO), polyphenylene sulfide (PPS), and polyphenylene sulfone, these polymers are... 

Aromatic polymers such as PS are readily attacked by chlorine bromine, concentrated sulfuric acid, and nitric acid. These reactions do not decrease the degree of polymerization of the polymers. Aromatic polymers with stiffening groups, such as PPO, polyarylsulfone, polyarylether ketone (PEEK), and polyphenylene sulfide (PPS), are more resistant to attack by corrosives than those with flexibilizing groups. 

Other macromolecules are formed by condensing their monomers to form a repeat functional group (e.g., esters, amides, ethers) interspersed by alkyl chains, aromatic rings, or combinations of both. These condensations are characterized frequently, although not always by the loss of some by product (e.g., water, alcohol). The methods of formation of these polymers are far more varied than those of addition polymers. Examples of condensation polymers are (a) poly(esters), (b) poly(urethanes), (c) poly (carbonate), and (d) polyphenylene oxide). 

The routes give, using well-known condensation and radical reactions, bakelites (I), polyazophenylenes (II), polyimides (III), polyurethanes (IV), nitro compounds and polyamides (V), aromatic polyethers and polyesters (VI), polychalcones (VII), polyphenylene sulfides (IX), ammonia lignin (X), carbon fibers (XI), silicones (XII), and phosphorus esters (XIII). In addition, radiation and chemical grafting can be used to obtain polymers of theoretical interest and practical use. Although the literature on the above subject is very large, there are comprehensive summaries available (1,28,69). 

Synthesis conditions and analytical results (Table II) are consistent with the hypothetical structures of sulfur lignin shown in Figure 2. Sulfur lignin is an aromatic thioether and it resembles polyphenylene sulfide derivatives (8). 

III. Structure and properties of aromatic polyethers 1. Halogen substituted polyphenylene ethers... 

---