Polyol properties

Designation of hybrid Dispersion Polyol Properties of dispersions ... 

The physical properties of polyurethane adhesives result from a special form of phase separation which occurs in the cross-linked polyurethane stmcture. The urethane portions of polyurethanes tend to separate from the polyol portion of the resin, providing good shear strength, good low temperature flexibiUty, and high peel strength. Catalysts such as dibutyltin dilaurate [77-58-7], stannous octoate [1912-83-0], l,4-diazabicyclo[2.2.2]octane... 

Binary mixtures of pentaerythritol with many other polyol species can produce heat or electrical storage media having excellent retention properties... 

These foams are produced from long-chain, Hghtiy branched polyols reacting with a diisocyanate, usuaUy toluene diisocyanate [1321 -38-6] (TDI), to form an open-ceUed stmcture with free air dow during dexure. During manufacture these foams are closely controUed for proper density, ranging from 13 to 80 kg/m (0.8—5 lbs/ft ), to achieve the desired physical properties and cost. 

Miscellaneous chemicals are used to modify the final properties of rigid polyurethane foams. Eor example, halogenated materials are used for flammabihty reduction, diols may be added for toughness or flexibiUty, and terephthalate-based polyester polyols may be used for decreased flammabiUty and smoke generation. Measurements of flammabihty and smoke characteristics are made with laboratory tests and do not necessarily reflect the effects of foams in actual fire situations. 

Uses. Neopentyl glycol is used extensively as a chemical intermediate in the manufacture of polyester resins (see Alkyd resins), polyurethane polyols (see Urethane polymers), synthetic lubricants, polymeric plasticizers (qv), and other polymers. It imparts a combination of desirable properties to properly formulated esterification products, including low color, good weathering and chemical resistance, and improved thermal and hydrolytic stabiUty. 

Polyol Esters. Polyol esters are formed by the reaction of an alcohol having two or more hydroxyl groups, eg, a polyhydric alcohol and a monobasic acid. In contrast to the diesters, the polyol in the polyol esters forms the backbone of the stmcture and the acid radicals are attached to it. The physical properties maybe varied by using different polyols or acids. Trimethylolpropane [77-99-6] C H O, and pentaerythritol [115-77-5] are... 

Heteroatom functionalized terpene resins are also utilized in hot melt adhesive and ink appHcations. Diels-Alder reaction of terpenic dienes or trienes with acrylates, methacrylates, or other a, P-unsaturated esters of polyhydric alcohols has been shown to yield resins with superior pressure sensitive adhesive properties relative to petroleum and unmodified polyterpene resins (107). Limonene—phenol resins, produced by the BF etherate-catalyzed condensation of 1.4—2.0 moles of limonene with 1.0 mole of phenol have been shown to impart improved tack, elongation, and tensile strength to ethylene—vinyl acetate and ethylene—methyl acrylate-based hot melt adhesive systems (108). Terpene polyol ethers have been shown to be particularly effective tackifiers in pressure sensitive adhesive appHcations (109). 

All d Ingredients Eor each of the three principal components of alkyd reskis, the polybasic acids, the polyols, and the monobasic acids, there is a large variety to be chosen from. The selection of each of these kigredients affects the properties of the reski and may affect the choice of manufacturkig processes. Thus, to both the reski manufacturers and the users, the selection of the proper kigredients is a significant decision. 

In general, these polyols are water-soluble, crystalline compounds with small optical rotations in water and a slightly sweet to very sweet taste. Selected physical properties of many of the sugar alcohols are Hsted in Table 1. 

A number of these stmctures are offered commercially by BASE Corporation under the trade name Tetronic polyols. The products are similar to oxygen block polymers. Although not strongly surface active per se, they are useful as detergents, emulsifiers, demulsifiers, defoamers, corrosion inhibitors, and lime-soap dispersants. They are reported to confer antistatic properties to textiles and synthetic fibers. 

Various polymers, such as polythiourethanes, polythioethers, and polythioacrylates, are used to produce resins which are transparent, colorless and have a high refractive index and good mechanical properties, useful for the production of optical lenses. Higher refractive indices are promoted by sulfur compounds and especially by esters of mercaptocarboxyhc acids and polyols such as pentaerythritol (41) (see Polymers containing sulfur). 

The steric effects in isocyanates are best demonstrated by the formation of flexible foams from TDI. In the 2,4-isomer (4), the initial reaction occurs at the nonhindered isocyanate group in the 4-position. The unsymmetrically substituted ureas formed in the subsequent reaction with water are more soluble in the developing polymer matrix. Low density flexible foams are not readily produced from MDI or PMDI enrichment of PMDI with the 2,4 -isomer of MDI (5) affords a steric environment similar to the one in TDI, which allows the production of low density flexible foams that have good physical properties. The use of high performance polyols based on a copolymer polyol allows production of high resiHency (HR) slabstock foam from either TDI or MDI (2). 

In the manufacture of highly resident flexible foams and thermoset RIM elastomers, graft or polymer polyols are used. Graft polyols are dispersions of free-radical-polymerized mixtures of acrylonitrile and styrene partially grafted to a polyol. Polymer polyols are available from BASF, Dow, and Union Carbide. In situ polyaddition reaction of isocyanates with amines in a polyol substrate produces PHD (polyhamstoff dispersion) polyols, which are marketed by Bayer (21). In addition, blending of polyether polyols with diethanolamine, followed by reaction with TDI, also affords a urethane/urea dispersion. The polymer or PHD-type polyols increase the load bearing properties and stiffness of flexible foams. Interreactive dispersion polyols are also used in RIM appHcations where elastomers of high modulus, low thermal coefficient of expansion, and improved paintabiUty are needed. 

Most flexible foams produced are based on polyether polyols ca 8—10% (15—20% in Europe) of the total production is based on polyester polyols. Elexible polyether foams have excellent cushioning properties, are flexible over a wide range of temperatures, and can resist fatigue, aging, chemicals, and mold growth. Polyester-based foams are superior in resistance to dry cleaning and can be flame-bonded to textiles. 

---