Polymers impact modifiers

Acrylonitrile-styrene-acrylate (ASA) polymers share obvious similarities with ABS but ASA was only developed in the 1960s. ASA polymers are essentially SAN polymers impact modified with an acrylate rubber. The earliest attempt to make ASA was by Herbig and Salyer of Monsanto [23] using butyl acrylate as the rubber phase. This work was then refined by Otto [24] and Siebel [25], both of BASF, who copolymerized butyl acrylate with butadiene to prepare the rubber phase. 

Novalene. [Nova Polymers] Impact modifier upgrades properties of iroly-styrene, polyethylene, ypropytoe. 

The physical mixing of two or more polymers to crate a material with properties different from each of the components has become an increasingly popular route to new materials development. The resulting blend or alloy greatly reduces the associated time and costs while permitting improved processibility and enhanced properties tailored to specific application areas. Many commercial examples of two-phase polyblends consist of a matrix polymer impact modified by the addition of rubber particles. Recently, however, TLCPs have received increasing attention in the scientific and technical literature as in situ reinforcements in polymer blends and microcomposites. The matrices examined in the literature include polyimides, PES, PEI, PEEK, polycarbonate, PET, PPS, and polyarylate. 

Uses Antioxidant for polyolefins, polyamides, polyesters, PVC, PS, rubbers, food-grade polymers impact modifier for PVC Regulatay FDA 21CFR 178.2010 Manuf./Dlstrlb. Aldrich Ciba Spec. Chems7/tddit. GE Spec. 

Acrylic resin Acrylonitrilefbutadiene/styrene copolymer Bis (2,4-di-t-butylphenyl) pentaerythritol diphosphite Butadiene/acrylonitrile copolymer EthyleneA/A copolymer Methoxyethyl acrylate Methyl methacrylate butadiene styrene terpolymer Polyethylene elastomer, chlorinated 2-Propenoic acid, 2-methylmethyl ester, polymer with 1,3-butadiene and butyl 2-propenoate impact modifier, PVC rigid EVA/PVC graft polymer impact modifier, recycled polyamides EPDM, maleated impact modifier, thermoplastics Butadiene/acrylonitrile copolymer impact strength modifier PEG-6 trimethylolpropane impact-resistance lights Polyester carbonate resin impact-resistance, lights Polyester carbonate resin impeller... 

Schlagzkhmacher polym impact modifier, toughening agent Schlamm/... 

Fabricated article that is made by a high critical shear rate melt processing operation and comprising a blend of at least two polymers that are mutually immiscible Electrically conductive thermoplastic structure made from polymer, impact modifier, and metal-coated fiber Pulse damper for a fluid medium A multilayer optical film... 

The term unplastidzed (also spelt unplastidsed ) means that there is no plasticizer present in the injection molding material but, it does not mean that there are no additives mixed in with the polyvinyl chloride plastic or, resin (PVC). Additives are essential in PVC technology as without them the plastic is useless as it cannot be processed. Some additives enhance the properties of the base PVC and permit its use in a wider range of applications. Examples of such additives include heat stabilizers (often based on lead or tin), lubricants (for example, butyl stearate), processing aids (which may be based on acrylic polymers), impact modifiers... 

The principal monomer of nitrile resins is acrylonitrile (see Polyacrylonitrile ), which constitutes about 70% by weight of the polymer and provides the polymer with good gas barrier and chemical resistance properties. The remainder of the polymer is 20 to 30% methylacrylate (or styrene), with 0 to 10% butadiene to serve as an impact-modifying termonomer. 

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acryUc sheet. PMMA is also used in mol ding and extmsion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acryUc latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic stmcture, acetone is found in the following major end use products acryUc sheet mol ding resins, impact modifiers and processing aids, acryUc film, ABS and polyester resin modifiers, surface coatings, acryUc lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see METHACRYLIC ACID AND DERIVATIVES METHACRYLIC POLYMERS). 

When monomers of drastically different solubiUty (39) or hydrophobicity are used or when staged polymerizations (40,41) are carried out, core—shell morphologies are possible. A wide variety of core—shell latices have found appHcation ia paints, impact modifiers, and as carriers for biomolecules. In staged polymerizations, spherical core—shell particles are made when polymer made from the first monomer is more hydrophobic than polymer made from the second monomer (42). When the first polymer made is less hydrophobic then the second, complex morphologies are possible including voids and half-moons (43), although spherical particles stiU occur (44). 

MBS polymers are prepared by grafting methyl methacrylate and styrene onto a styrene—butadiene mbber in an emulsion process. The product is a two-phase polymer useful as an impact modifier for rigid poly(vinyl chloride). 

Noryl. Noryl engineering thermoplastics are polymer blends formed by melt-blending DMPPO and HIPS or other polymers such as nylon with proprietary stabilizers, flame retardants, impact modifiers, and other additives (69). Because the mbber characteristics that are required for optimum performance in DMPPO—polystyrene blends are not the same as for polystyrene alone, most of the HIPS that is used in DMPPO blends is designed specifically for this use (70). Noryl is produced as sheet and for vacuum forming, but by far the greatest use is in pellets for injection mol ding. 

Poly(vinyl chloride). PVC is one of the most important and versatile commodity polymers (Table 4). It is inherently flame retardant and chemically resistant and has found numerous and varied appHcations, principally because of its low price and capacity for being modified. Without modification, processibiUty, heat stabiUty, impact strength, and appearance all are poor. Thermal stabilizers, lubricants, plasticizers, impact modifiers, and other additives transform PVC into a very versatile polymer (257,258). 

Also, PBT is blended with poly(ethylene terephthalate) (PET), polysulfone, and SMA (303). PET may also be blended with a number of other engineering polymers, such as PC and impact modifiers. 

Not only ate ABS polymers useful engineering plastics, but some of the high mbber compositions are excellent impact modifiers for poly(vinyl chloride) (PVC). Styrene—acrylonitrile-grafted butadiene mbbers have been used as modifiers for PVC since 1957 (87). 

The level of technical service support provided for a given product generally tracks in large part where the suppHer considers thek product to be located within the spectmm of commodity to specialty chemicals. Technical service support levels for pure chemicals usually provided in large quantities for specific synthetic or processing needs, eg, ammonia (qv), sulfuric acid (see SuLFURic ACID AND SULFURTRIOXIDe), formaldehyde (qv), oxygen (qv), and so forth, are considerably less than for more complex materials or blends of materials provided for multistep downstream processes. Examples of the latter are many polymers, colorants, flocculants, impact modifiers, associative thickeners, etc. For the former materials, providing specifications of purity and physical properties often comprises the full extent of technical service requked or expected by customers. These materials are termed undifferentiated chemicals (9),... 

The largest volume commercial derivatives of 1-butanol are -butyl acrylate [141-32-2] and methacrylate [97-88-1] (10). These are used principally ia emulsion polymers for latex paints, ia textile appHcations and ia impact modifiers for rigid poly(vinyl chloride). The consumption of / -butanol ia the United States for acrylate and methacrylate esters is expected to rise to 182,000—186,000 t by 1993 (10). 

Thermoplastic chlorinated polyethylenes are seldom used on their own but primarily in blends with other polymers, particularly PVC. If chlorination is taken to a level at which the polymer is only semi-compatible with the PVC, a blend with high impact strength may be obtained. In these circumstances the material is classified as an impact modifier. 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

In addition to acting as impact modifiers a number of polymeric additives may be considered as processing aids. These have similar chemical constitutions to the impact modifiers and include ABS, MBS, chlorinated polyethylene, acrylate-methacrylate copolymers and EVA-PVC grafts. Such materials are more compatible with the PVC and are primarily included to ensure more uniform flow and hence improve surface finish. They may also increase gelation rates. In the case of the compatible MBS polymers they have the special function already mentioned of balancing the refractive indices of the continuous and disperse phases of impact-modified compound. 

This chapter has so far dealt with the major fields of use of vinyl chloride polymers, namely plasticised PVC homopolymer, unplasticised PVC, including impact-modified grades, and copolymers particular based on vinyl acetate. There are, however, five particular special forms of vinyl chloride polymer which merit separate consideration, namely crystalline PVC, after-chlorinated PVC (often known as CPVC) and certain graft copolymers and two vinyl-chloride-based copolymers. 

It is interesting to note that these crystalline materials do not dissolve in tetrahydrofuran or cyclohexanone at room temperature, indicating that PVC is too weak a proton donor to overcome extensive crystallisation. Crystalline PVC has a greater tensile strength and creep resistance than conventional polymer. It is, however, brittle, and whilst most conventional impact modifiers appear ineffective, EVA polymers are said to be quite useful. Plasticised compounds may also be prepared although mixing temperatures of up to 190°C are necessary. 

Blending of ABS with other polymers is not restricted to the aim of raising the distortion temperature. Blends with PVC are made for various purposes. For example, 80 20 ABS/PVC blends are used to produce fire-retarding ABS-type materials, as already mentioned, while 10 90 blends are considered as impact-modified forms of unplasticised PVC. ABS materials have also been blended with plasticised PVC to give a crashpad sheet material. 

Blending of ABS with an acrylic material such as poly(methyl methacrylate) can in some cases allow a matching of the refractive indices of the rubbery and glassy phases and providing that there is a low level of contaminating material such as soap and an absence of insoluble additives a reasonable transparent ABS-type polymer may be obtained. More sophisticated are the complex terpolymers and blends of the MBS type considered below. Seldom used on their own, they are primarily of use as impact modifiers for unplasticised PVC. 

---