Polymers, formaldehyde Preparation

Actually, one of the first nanocomposites of this kind, although the purpose was not to improve the mechanical properties of polymers, was prepared by Kirkland, and Her and McQueston, [38] when they synthesized polymer-silica composites with average diameters ranging from 500 nm to 20 p,m by copolymerisation of either melamine or urea with formaldehyde in the presence of a silica sol. Calcination yielded microporous silica spheres, which were used as chromatographic column packing under the trade name Zorbex . 

Synthesis of poly(salicylaldoxime-3,5-diylmethylene 9 The polymer was prepared by dissolving 13.7 g (0.1 mol) of salicylaldoxime and 16.2 g (0.2 mol) of 37% aq. formaldehyde in 65 mL of 50% aqueous ethanol and enough NaOH to raise the pH to about 9. The mixture was refluxed for 9 h after which the reaction mixture was evaporated and the resulting resin was cured at 120 °C for 24 h. The resin was then washed with aqueous ethanol and water until neutral. After Soxhlet extraction by benzene for 24 h, the brown resin was dried at 90 °C for 24 h in vacuum, crushed and sieved (35-60 mesh). 

Many low-molecular-weight aldehydes and ketones are important industrial chemicals. Formaldehyde, a starting material for a number of polymers, is prepared by oxidation of methanol over a silver or iron oxide/molybdenum oxide catalyst at elevated temperature. 

Homopolymer. Acetal homopolymers are prepared from formaldehyde and consist of high-molecular-weight linear polymers of formaldehyde. 

The details of the commercial preparation of acetal homo- and copolymers are discussed later. One aspect of the polymerisation so pervades the chemistry of the resulting polymers that familiarity with it is a prerequisite for understanding the chemistry of the polymers, the often subde differences between homo- and copolymers, and the difficulties which had to be overcome to make the polymers commercially useful. The ionic polymerisations of formaldehyde and trioxane are equiUbrium reactions. Unless suitable measures are taken, polymer will begin to revert to monomeric formaldehyde at processing temperatures by depolymerisation (called unsipping) which begins at chain ends. 

The cyanoacryhc esters are prepared via the Knoevenagel condensation reaction (5), in which the corresponding alkyl cyanoacetate reacts with formaldehyde in the presence of a basic catalyst to form a low molecular weight polymer. The polymer slurry is acidified and the water is removed. Subsequendy, the polymer is cracked and redistilled at a high temperature onto a suitable stabilizer combination to prevent premature repolymerization. Strong protonic or Lewis acids are normally used in combination with small amounts of a free-radical stabilizer. 

Acetylene is condensed with carbonyl compounds to give a wide variety of products, some of which are the substrates for the preparation of families of derivatives. The most commercially significant reaction is the condensation of acetylene with formaldehyde. The reaction does not proceed well with base catalysis which works well with other carbonyl compounds and it was discovered by Reppe (33) that acetylene under pressure (304 kPa (3 atm), or above) reacts smoothly with formaldehyde at 100°C in the presence of a copper acetyUde complex catalyst. The reaction can be controlled to give either propargyl alcohol or butynediol (see Acetylene-DERIVED chemicals). 2-Butyne-l,4-diol, its hydroxyethyl ethers, and propargyl alcohol are used as corrosion inhibitors. 2,3-Dibromo-2-butene-l,4-diol is used as a flame retardant in polyurethane and other polymer systems (see Bromine compounds Elame retardants). 

Paraformaldehyde [30525-89-4] is a mixture of polyoxymethylene glycols, H0(CH20) H, with n from 8 to as much as 100. It is commercially available as a powder (95%) and as flake (91%). The remainder is a mixture of water and methanol. Paraformaldehyde is an unstable polymer that easily regenerates formaldehyde in solution. Under alkaline conditions, the chains depolymerize from the ends, whereas in acid solution the chains are randomly cleaved (17). Paraformaldehyde is often used when the presence of a large amount of water should be avoided as in the preparation of alkylated amino resins for coatings. Formaldehyde may also exist in the form of the cycHc trimer trioxane [110-88-3]. This is a fairly stable compound that does not easily release formaldehyde, hence it is not used as a source of formaldehyde for making amino resins. 

Polymers. Quinoline and its derivatives may be added to or incorporated in polymers to introduce ion-exchange properties (see Ion exchange). For example, phenol—formaldehyde polymers have been treated with quinoline, quinaldine, or lepidine (81) (see Phenolic resins). Resins with variable basic exchange capacities have been prepared by treating Amherlites with 2-methylquinoline (82). 

Synthetic resins, such as phenoHc and cresyUc resins (see Phenolic resins), are the most commonly used friction material binders, and are usually modified with drying oils, elastomer, cardanol [37330-39-5] an epoxy, phosphoms- or boron-based compounds, or even combinations of two. They ate prepared by the addition of the appropriate phenol and formaldehyde [50-00-0] in the presence of an acidic or basic catalyst. Polymerization takes place at elevated temperatures. Other resin systems are based on elastomers (see Elastomers, synthetic), drying oils, or combinations of the above or other polymers. 

In the early 1940s an intensive research programme on the polymerisation of formaldehyde was initiated by the Du Pont Company. As a consequence of this work polymers, both tough and adequately stable to processing conditions, were prepared and eventually marketed " (Delrin). 

In the manufacture of pure resorcinol resins, the reaction can be violently exothermic unless controlled by the addition of alcohols. Because the alcohols perform other useful functions in the glue mix, they are left in the liquid adhesive. PRF adhesives are generally prepared firstly by reaction of phenol with formaldehyde to form a PF resol polymer, that has been proved to be in the greatest percentage, and often completely, linear [95], In the reaction step that follows the resorcinol chemical is added in excess to the PF-resol to react it with the PF-resin -CH2OH groups to form PRF polymers in which the resorcinol groups can be resorcinol chemical or any type of resorcinol-formaldehyde polymer. 

Amino resins are condensation thermosetting polymers of formaldehyde with either urea or melamine. Melamine is a condensation product of three urea molecules. It is also prepared from cyanamide at high pressures and temperatures ... 

Baekeland in America obtained his first patent for materials prepared from these two compounds. In 1910 he founded the General Bakelite Company to exploit this development, in the process making phenol-formaldehydes, the first synthetic polymers to achieve commercial importance. 

Amino resins are those polymers prepared by reaction of either urea or melamine with formaldehyde. In both cases the product that results from the reaction has a well crosslinked network structure, and hence is a thermoset polymer. The structures of the two parent amino compounds are shown in Figure 1.1. 

When crosslinked, amino resins are very resistant to most organic solvents, though they tend to be attacked by both acids and alkalis. Urea-formaldehyde polymers are more susceptible to attack than those prepared from melamine and formaldehyde. 

Phenol-formaldehyde resins using prepolymers such as novolaks and resols are widely used in industrial fields. These resins show excellent toughness and thermal-resistant properties, but the general concern over the toxicity of formaldehyde has resulted in limitations on their preparation and use. Therefore, an alternative process for the synthesis of phenolic polymers avoiding the use of formaldehyde is strongly desired. 

Homopolymers and copolymers from amido-sulfonic acid or salt containing monomers can be prepared by reactive extrusion, preferably in a twin screw extruder [1660]. The process produces a solid polymer. Copolymers of acrylamide, N-vinyl-2-pyrrolidone, and sodium-2-acrylamido-2-methyl-propane sulfonate have been proposed to be active as fluid loss agents. Another component of the formulations is the sodium salt of naphthalene formaldehyde sulfonate [207]. The fluid loss additive is mixed with hydraulic cements in suitable amounts. 

---