Multiphase Polymerization

Dynamic Mechanical Analysis in Polymeric Multiphase Systems... 

Behavior of Polymeric Multiphase Systems in the Glassy Region. 183... 

Behavior of the Polymeric Multiphase Systems in THE Glass Transition and Rubbery Regions... 

Dynamic mechanical analysis belongs to the macroseopic physical characterization methods of polymeric multiphase systons. Because polymers are very sensitive to temperature in the region of the glass transition, any change in the glass transition... 

Dynamic mechanical analysis in polymeric multiphase systems in solid state, as part of rheology, is associated with oscillatory tests that are employed to investigate all kinds of viscoelastic material from the point of view of flow and deformation behavior. In particular, it evaluates the molecular mobility in polymers, the pattern of which may be an indication of phase-separated systems. Although there are certain preferred tools for visual examination of phenomena for these kinds of systems, dynamic mechanical analysis has the advantage of examination in dynamic conditions and of the prediction of properties. 

Other solubilization and partitioning phenomena are important, both within the context of microemulsions and in the absence of added immiscible solvent. In regular micellar solutions, micelles promote the solubility of many compounds otherwise insoluble in water. The amount of chemical component solubilized in a micellar solution will, typically, be much smaller than can be accommodated in microemulsion fonnation, such as when only a few molecules per micelle are solubilized. Such limited solubilization is nevertheless quite useful. The incoriDoration of minor quantities of pyrene and related optical probes into micelles are a key to the use of fluorescence depolarization in quantifying micellar aggregation numbers and micellar microviscosities [48]. Micellar solubilization makes it possible to measure acid-base or electrochemical properties of compounds otherwise insoluble in aqueous solution. Micellar solubilization facilitates micellar catalysis (see section C2.3.10) and emulsion polymerization (see section C2.3.12). On the other hand, there are untoward effects of micellar solubilization in practical applications of surfactants. Wlren one has a multiphase... 

The world production of plastics in 1995 is projected at 76 million metric tons (mT) with an annual growth rate (AGR) of 3.7%. The expected AGR of PBAs is 12% and that of composites 16%. In 1987, 21% of polymers were used in blends and 29% in composites and filled plastics [56]. If this trend continues, by 1995 all manufactured resins will be used in multiphase polymeric systems. Two factors moderating the tendency are ... 

In multiphase polymeric systems, the properties of the end products do not solely depend on the properties of the pure components, but other various parameters also have a great impact (Fig. 1). In order to emphasize these factors, the following systems are taken into consideration (I) elastomer toughened styrene system, (2) elastomer toughened polycarbonate blends, and (3) direct reactive blend processing. 

Amine-terminated siloxane oligomers have also been utilized in the synthesis of various siloxane-amide and siloxane-imide copolymers, High molecular weight siloxane-amide copolymers have been synthesized by the solution or interfacial co-polymerization of siloxane oligomers with sebacoyl chloride or terephthaloyl chloride respectively 1S5,165). In some reactions diamine chain extenders have also been utilized. Thermal and dynamic mechanical characterization of these copolymers have shown the formation of multiphase systems160). Compression molded films displayed very good elastomeric properties. 

In a multiphase formulation, such as an oil-in-water emulsion, preservative molecules will distribute themselves in an unstable equilibrium between the bulk aqueous phase and (i) the oil phase by partition, (ii) the surfactant micelles by solubilization, (iii) polymeric suspending agents and other solutes by competitive displacement of water of solvation, (iv) particulate and container surfaces by adsorption and, (v) any microorganisms present. Generally, the overall preservative efficiency can be related to the small proportion of preservative molecules remaining unbound in the bulk aqueous phase, although as this becomes depleted some slow re-equilibration between the components can be anticipated. The loss of neutral molecules into oil and micellar phases may be favoured over ionized species, although considerable variation in distribution is found between different systems. 

Many polymers can be produced via interfacial polymerization. These multiphase reactions occur in emulsions, suspensions, slurries, or at the interface between a gas and a solid. 

Multiphase homogeneous catalysis (continued) hydroformylation, 42 483-487, 498 hydrogenations, 42 488-491 metal salts as catalysis, 42 482-487 neutral ligands, 42 481 82 organic reactions, 42 495 0X0 synthesis, 42 483-487 ring-opening metathesis polymerization and isomerization, 42 492-494 telomerizations, 42 491-492 diols as catalyst phase, 42 496 fluorinated compounds as catalyst phase, 42 497... 

Metals, intermetallic compounds, and alloys generally react with hydrogen and form mainly solid metal-hydrogen compounds (MH ). Hydrides exist as ionic, polymeric covalent, volatile covalent and metallic hydrides. Hydrogen reacts at elevated temperatrrres with many transition metals and their alloys to form hydrides. Many of the MH show large deviations from ideal stoichiometry (n= 1, 2, 3) and can exist as multiphase systems. 

Definitions of terms related to polymer blends, composites, and multiphase polymeric materials (lUPAC Recommendations 2004), Pure Appl. Chem. 76, 1985-2007 (2004). Reprinted as Chapter 9, this edition. 

---