Polymeric surfactants system polymer

The inverse emulsion form is made by emulsifying an aqueous monomer solution in a light hydrocarbon oil to form an oil-continuous emulsion stabilized by a surfactant system (21). This is polymerized to form an emulsion of aqueous polymer particle ranging in size from 1.0 to about 10 pm dispersed in oil. By addition of appropriate surfactants, the emulsion is made self-inverting, which means that when it is added to water with agitation, the oil is emulsified and the polymer goes into solution in a few minutes. Alternatively, a surfactant can be added to the water before addition of the inverse polymer emulsion (see Emulsions). 

Polymeric surfactants, 24 153, 154, 159 Polymeric system, smart, 13 742 Polymeric titanate esters, 25 79 Polymer industry, organic peroxides in, 18 495... 

Polymer-based delivery systems (Fig. 11.1) include polymer-protein conjugates, polymer-drug conjugates, micelles consisting of polymeric surfactants, and complexes of cationic polymers and DNA (polyplexes).26... 

In the nonionic system observed under EVM, the initial microemulsion showed no tendency of gelation until it reached 60 C. After reaching 60<>C, the system gels and starts to polymerize after 10-12 hours. As polymerization proceeds, the water separates out. After about 20-24 hours, the gel starts to become a solid with an excess emulsion phase formed at the bottom. The polymerization is essentially complete after 36 hours. Due to different modes of polymerization in the anionic and nonionic surfactant systems, the mechanical properties of the solid are different. The polymers obtsuned from anionic microemulsions are brittle, while those obtmned from nonionic microemulsions are ductile. 

Emulsion polymerization has become an important process for the production of a large number of industrial polymers in the form of polymer colloids or latexes. They are the base of adhesives, paints and especially of waterborne coatings. An interest has been developed in recent years in emulsion polymerization systems in which the classical low molecular weight surfactaints are replaced by polymeric surfactants, either hydrophilic-hydrophobic block and graft copolymers (1-4) or functionalized oligomers (5). 

Polymerization of the alkoxyallene with macromonomers having a poly (ethyleneglycol) group by [(7r-allyl)Ni(OCOCF3)]2/PPh3 produces a graft copolymer with narrow molecular weight distribution [129]. The products serve as polymeric surfactants in the polymer blend system of polystyrene and poly(methyl methacrylate). 

There are a large number of methods (Table 2) to prepare nanoparticulate systems. These depend to a large extent on the material (polymer, protein, metal, ceramic) that will form the basis of the carrier. One can, in essence, consider three approaches to their production (0 by comminution (in the case of solids, milling, and in the case of liquids, high pressure emulsification) (ii) molecular self-assembly, such as that occurs with polymeric surfactants to form polymeric micelles or with dendrons to form dendrimeric aggregates and (iii) precipitation from a good solvent as shown in Figure 6. 

These are stable micelles that are formed with polymeric surfactants. Amphiphilic block copolymers such as the pluronics (polyoxyethylene-polyoxypropylene block copolymers) are able to self-assemble into polymeric micelles and hydrophobic drugs may be solubilized within the core of the micelle or, alternatively, conjugated to the micelle-forming polymer. Although micelles are rather dynamic systems that continuously exchange units between the micelle structure and the free units in solution, those composed of polyoxyethylene - poly(aspartic acid) have been found sufficiently... 

The condensation method begins with molecular units, and the particles are built-up by a process of nucleation typical example is the preparation of polymer lattices, in which case the monomer (e.g., styrene or methylmethacrylate) is emulsified in water using an anionic or nonionic surfactant (e.g., sodium dodecyl sulphate or alcohol ethoxylate). A polymeric surfactant is also added to ensure the long-term colloid stabiHty of the resulting latex. An initiator such as potassium persulphate is then added and, when the temperature of the system has increased, initiation occurs that results in formation of the latex [polystyrene or poly(methylmethacrylate)]. 

Nonionic surfactants and both natural and synthetic polymers (which are collectively referred to as polymeric surfactants), when used to stabilise soHd/hquid (suspensions) andliquid/liquid (emulsions) disperse systems, play important roles in many industrial applications including paints, cosmetics, agrochemicals, and ceramics. Nonionic surfactants and polymers are particularly important for the preparation of concentrated dispersions - that is, with a high volume fraction

[Pg.115]

Recently the polymerization of styrene within lamellar and cubic phases of the surfactant DODAB (dioctadecyldimethylammonium bromide) was studied [50]. After polymerization, the polystyrene/water/DODAB system showed the same phase behavior as the binary water/DODAB system, a result suggesting a phase separation during polymerization into a polymer-rich (with M 400,000) and a lyotropic phase. 

The balance of the many possible interactions in these MHAP produces unique rheological behavior (20-24, 27). Thus, the surfactant in the MHAP is an integral component of the polymer-surfactant system, serving a dual function of aiding the formation of the polymer architecture during polymerization as well as being reversible cross-link points in solution. 

---