Polymer-Supported Diels-Alder Catalysts

The Diels-Alder reaction of a diene and a dienophile has become one of the most powerful carbon-carbon bond-forming processes [81]. In normal Diels-Alder reactions of an electron-poor dienophile with an electron-rich diene, the main interaction is between the HOMO of the diene and the LUMO of the dienophile. Coordination of a Lewis acid to the dienophile reduces its frontier orbital energies, and this increases the rate of the reaction. Regio- and stereoselectivity are also markedly affected by the Lewis acid. Recent extensive studies on the design of chiral Lewis acids have led to fruitful results in the control of the stereochemistry of a variety of pericyclic reactions. Several chirally modified Lewis acids have been developed for the asymmetric Diels-Alder reaction [82,83] and spectacular advances have recently been achieved in this area. Various kinds of polymer-supported chiral Lewis acid have also been developed. Polymer-supported A1 Lewis acids such as 62 have been used in the Diels-Alder reaction of cyclopentadiene and methacrolein (Eq. 20) [84] as has polymer-supported Ti alkoxide 63 [84]. These Ti catalysts are readily prepared and have high activity in the Diels-Alder reaction. 

The first successful examples of enantioselective Diels-Alder reactions catalyzed by chirally modified Lewis acids were reported by Koga [85]. The catalysts were prepared from menthol and AlEt2Cl [86]. Alumina-supported chiral menthoxy aluminum derivatives (64, 65, 66, 67) have been prepared by simple mixing of (-)-menthol, AlEt2Cl, and alumina in toluene under reflux. The reaction of methacrolein with cyclopentadiene (Eq. 20) was conducted with 67 as catalyst at -50 °C and afforded 81 % conversion with 31 % ee [87] Koga reported 57 % ee at -78 °C by use of an homogeneous catalyst [85]. Solid catalyst 69, prepared from silica gel-supported proli-nol 68 and AlEt2Cl (Eq. 21) is also an active catalyst in the same reaction, but with low enantioselectivity [87]. When the same catalyst was attached to crosslinked polystyrene (70) the ee in the reaction was lower [88]. 

Kobayashi et al. developed chiral Lewis acids derived from A -benzyldiphenylproli-nol and boron tribromide and used these successfully as catalysts in enantioselective Diels-Alder reactions [89]. The corresponding polymeric catalyst 71 was prepared and used for the Diels-Alder reaction of cyclopentadiene with methacrolein [90]. Different polymeric catalysts 72, 73, 74 were prepared from supported chiral amino alcohols and diols fimctionalized with boron, aluminum and titanium [88,90]. In these polymers copolymerization of styrene with a chiral auxiliary containing two polymerizable groups is a new approach to the preparation of crosslinked chiral polymeric ligands. This chiral monomer unit acts as chiral ligand and as a crosslink. 

The same reaction has also been catalyzed by chiral oxazaborolidinones derived from amino acids and boranes. They proved to be efficient catalysts for enantioselec-tive Diels-Alder reaction [91,92]. The polymer-supported chiral oxazaborolidinones 75 were reported to be efficient catalysts [93]. These polymer-supported chiral oxaza-borolidinone ligands were prepared both by chemical modification and by the copolymerization shown in Sch. 5 [94]. The polymer-supported chiral ligands were then reacted with borane to give the oxazaborolidines which were used as catalysts in Diels-Alder reaction of cyclopentadiene with methacrolein. 

Chiral oxazaborolidinones supported on silica gel 77 have been prepared as shown in Sch. 6 [87]. Although high conversion was attained with these catalysts, enantioselectivity was low (8 % ee). 

---

Other important titanium alkoxide-based Lewis acids are Ti-TADDOLate (a,a,a, a -tetraaryl-l,3-dioxolane-4,5-dimethanol)ates, among the most effective chiral catalysts for several important asymmetric reactions. These will be discussed in the sections on polymer-supported Diels-Alder reactions (Section 21.10) and alkylations (Section 21.9). 

The polymer-supported chiral oxazaborolidinone catalyst 5 prepared from valine was found by Ituno and coworkers to be a practical catalyst of the asymmetric Diels-Alder reaction [7] (Scheme 1.12). Of the several cross-linked polymers with a... 

Polymer-supported TADDOL-Ti catalyst 79 prepared by chemical modification was poorly active in the Diels-Alder reaction of 3-crotonoyloxazolidinone with cyclo-pentadiene (Eq. 24) whereas polymeric TADDOL-Ti 81 prepared by copolymerization of TADDOL monomer 80 with styrene and divinylbenzene had high activity similar to that of the soluble catalyst. In the presence of 0.2 equiv. 81 (R = H, Aryl = 2-naphthyl) the Diels-Alder adduct was obtained in 92 % yield with an endolexo ratio of 87 13. The enantioseleetivity of the endo product was 56 % ee. The stability and recyclability of the catalyst were tested in a batch system. The degree of conversion, the endolexo selectivity, and the enantioseleetivity hardly changed even after nine runs. Similar polymer-supported Ti-TADDOLate 82 was prepared by the chemical modification method [99]. Although this polymer efficiently catalyzed the same reaction to give the (2R,2S) adduct as a main product, asymmetric induction was less than that obtained by use of a with similar homogeneous species. 

Chiral cationic Pd-complexes with phosphinooxazolidine (POZ) represent another choice of catalyst for asymmetric Diels-Alder reaction [59]. Polymer-supported cationic POZ catalyst 107 effectively catalyzed the Diels-Alder reaction of cyclopentadiene 104 and acryloyl-1,3-oxazolidin-2-one 108 (Scheme 3.30). 

Supported Lewis acids are an interesting class of catalysts because of their operational simplicity, filterability and reusability. The polymer-bound iron Lewis-acid 53 (Figure 3.8) has been found [52] to be active in the cycloadditions of a, S-unsaturated aldehydes with several dienes. It has been prepared from (ri -vinylcyclopentadienyl)dicarbonylmethyliron which was copolymerized with divinylbenzene and then treated with trimethylsilyltriflate followed by THF. Some results of the Diels-Alder reactions of acrolein and crotonaldehyde with isoprene (2) and 2,3-dimethylbutadiene (4) are summarized in Equation 3.13. 

Figure 39 The enantioselective polymer-supported catalysts (61) of chiral oxazaborolidinone with cross-linking structures for use in the Diels-Alder reaction of methacrolein with cyclopentadiene. (Adapted from ref. 85.)...

A more versatile method to use organic polymers in enantioselective catalysis is to employ these as catalytic supports for chiral ligands. This approach has been primarily applied in reactions as asymmetric hydrogenation of prochiral alkenes, asymmetric reduction of ketone and 1,2-additions to carbonyl groups. Later work has included additional studies dealing with Lewis acid-catalyzed Diels-Alder reactions, asymmetric epoxidation, and asymmetric dihydroxylation reactions. Enantioselective catalysis using polymer-supported catalysts is covered rather recently in a review by Bergbreiter [257],... 

Asymmetric Diels-Alder reactions have also been achieved in the presence of poly(ethylene glycol)-supported chiral imidazohdin-4-one [113] and copper-loaded silica-grafted bis(oxazolines) [114]. Polymer-bound, camphor-based polysiloxane-fixed metal 1,3-diketonates (chirasil-metals) (37) have proven to catalyze the hetero Diels-Alder reaction of benzaldehyde and Danishefsky s diene. Best catalysts were obtained when oxovanadium(lV) and europium(III) where employed as coordinating metals. Despite excellent chemical yields the resulting pyran-4-ones were reported to be formed with only moderate stereoselectivity (Scheme 4.22). The polymeric catalysts are soluble in hexane and could be precipitated by addition of methanol. Interestingly, the polymeric oxovanadium(III)-catalysts invoke opposite enantioselectivities compared with their monomeric counterparts [115]. 

A -sulfinylacetamide 297 in greater than 90% yield when a catalytic amount of methyltrioxorhenium is employed. Futhermore, the hetero-Diels-Alder adduct is highly soluble in both chlorinated and ethereal solvents. A detailed investigation of the retro-Diels-Alder reaction of 298 by thermogravimetric analysis revealed an onset temperature of 120 °C and complete conversion of bicycle 298 to pentacene 296 at 160 °C, which are temperatures compatible with the polymer supports typically used in electronics applications. The electronic properties of these newly prepared OTFTs are similar to those prepared by traditional methods. Later improvements to this chemistry included the use of A -sulfinyl-/< r/-butylcarbamate 299 as the dienophile <2004JA12740>. The retro-Diels-Alder reaction of substrate 300 proceeds at much lower temperatures (130 °C, 5 min with FlTcatalyst 150 °C, Ih with no catalyst). 

Several researchers have reported synthetic approaches based on asymmetric Diels-Alder reactions catalyzed by TADDOL-Ti complexes [117-120]. Dendritic [121] and polymer-supported TADDOL-Ti complexes [122] have also been employed as recoverable and reusable catalysts to give comparatively high enantioselectivity. Transition-state models have been proposed independently by several groups for TADDOL-type titanium catalysis [121,123]. 

Rare earth metal triflates are recognized as a very efficient Lewis acid catalysts of several reactions including the aldol reaction, the Michael reaction, allylation, the Diels-Alder reaction, the Friedel-Crafts reaction, and glycosylation [110]. A polymer-sup-ported scandium catalyst has been developed and used for quinoline library synthesis (Sch. 8) [111], because lanthanide triflates were known to be effective in the synthesis of quinolines from A-arylimines [112,113]. This catalyst (103) was readily prepared from poly(acrylonitrile) 100 by chemical modification. A variety of combinations of aldehydes, amines, and olefins are possible in this reaction. Use of the polymer-supported catalyst has several advantages in quinoline library construction. 

Nafion is another choice of polymer support for Sc-based Lewis acids. Nafion-Sc catalyst is readily prepared by treatment of Nafion with ScCb 6H2O in acetonitrile under reflux [116]. Nafion-Sc catalyst has been found to be effective in several synthetic reactions including allylation of carbonyl compounds with tetraallyltin, Diels-Alder reaction, Friedel-Crafts acylation, and imino Diels-Alder reactions. The use of Nafion-Sc in flow systems has also been tested. 

Various types of chirally modified Lewis acids have been developed for asymmetric Diels-Alder cycloadditions. Some of these, including Ti-TADDOLates, have been attached to crosslinked polymers [11]. A recent example of this approach involved polymeric monoliths 103 containing TADDOL subunits (Scheme 3.29). The treatment of 103 with 71X4 afforded Ti-TADDOLates, which were used for the asymmetric Diels-Alder reachon of cyclopentadiene 104 and 105. The major product obtained in this reachon was the mdo adduct with 43% ee [58]. The supported Ti-catalysts showed an exhaordinary long-term stabihty, being achve for at least one year. 

Chiral secondary amines such as nonracemic imidazolidin-4-ones have been found to be effective asymmetric organocatalysts in the Diels-Alder cyclization of cyclopentadiene and a,p-unsaturated aldehydes [60]. A tyrosine-derived imidazoli-din-4-one was immobilized on PEG to provide a soluble, polymer-supported catalyst 110. In the presence of 110, Diels-Alder cycloaddition of acrolein 112 to 1,3-cyclohexadiene 111 proceeded smoothly to afford the corresponding cycloadduct 113 with high endo selectivity and enantioselectivity up to 92% ee (Scheme 3.31) [61]. 

Itsuno et al. have reported the use of polymer-supported oxazaborolidinone 102 as a chiral catalyst for asymmetric Diels-Alder reactions (Scheme 17)... 

Other polymer-supported catalysts for the asymmetric Diels-Alder reaction include aluminum and titanium complexes of chiral amino alcohols [74],... 

Seebach s TADDOL auxiliaries, derived from tartrate (chapter 23), combine well with Ti(IV) to make an effective Lewis acid catalyst 130 for Diels-Alder reactions. The reaction of isoprene with the doubly activated amide dienophile 128 gives one adduct 129 in good yield.29 Polymer supported versions of this catalyst are available. 

Polymer-supported A1 and Ti species as catalysts for Diels-Alder reactions ... 

Catalytic activity of these polymer-supported Ti and A1 species was assayed for the Diels-Alder reaction between cyclopentadiene and methacrolein [6]. As polymerization of cyclopentadiene competes with the cycloaddition process, all reactions were carried out using an excess (1.5 times) of the diene. Catalysts to dienophile ratios of ca. 0.05-0.2 were used for the different experiments. 

The polymer-supported Zr catalyst (12) is useful for asymmetric aza-Diels-Alder cycloaddition of benzaldehyde imine to Danishefsky diene [9]. The 6-substituted BINOL-Zr(IV) catalyst is useful for the enantioselective anft -preferred aldol reaction of benzaldehyde with ketene silyl thioacetal (15) (Scheme 5.5) [ 10]. The calculated charge densities on the oxygen atoms of the BINOL derivatives revealed that there is a good correlation between the charge density and the reactivity of 6-substituted BINOL [ 10]. 

---