Polymer chain-transfer agent

In their original discovery of miniemulsion polymerization, Ugelstad and co-workers [5] used either cetyl alcohol (CA water solubility estimated at 6x10 [43]) or hexadecane (HD water solubihty estimated at 1x10 [43]) to retard monomer diffusion from submicron monomer droplets. Both CA and HD, referred to here as costabilizers, are volatile organic components and are therefore not entirely desirable in the final product. Other researchers have used polymers, chain transfer agents, and comonomers as stabiUzers, as will be discussed later. 

Monomer Droplets. The monomer droplets serve primarily as reservoirs that supply monomer to the reaction sites in the polymer particles. These droplets can also contain a variety of other oil-soluble ingredients including dissolved polymer, chain transfer agents, and in unusual cases oil-soluble initiator. The monomer and other ingredients, if they have the requisite water solubility, are transported to the primary polymerization locus in the polymer particles. Reaction phenomena that can occur in the monomer droplets include the following ... 

Various costabilizers have been used in the miniemulsion polymerization. Cetyl alcohol and hexadecane are most often used since the original discovery of miniemulsion polymerization by Ugelstad et al. Other researchers have used initiators, polymers, chain transfer agents, or monomers as costabilizers. ... 

Chain transfer reactions. Active free radical sites at the ends of growing chains jump to another site on the same polymer molecule, a different polymer molecule, a solvent, monomer, or modifier molecule. Chain transfer affects the size, structure, and end groups of the polymers. Chain transfer agents (modifiers) are able to donate hydrogen atoms to this reaction. 

Inhibitors slow or stop polymerization by reacting with the initiator or the growing polymer chain. The free radical formed from an inhibitor must be sufficiently unreactive that it does not function as a chain-transfer agent and begin another growing chain. Benzoquinone is a typical free-radical chain inhibitor. The resonance-stabilized free radical usually dimerizes or disproportionates to produce inert products and end the chain process. 

In production, anhydrous formaldehyde is continuously fed to a reactor containing well-agitated inert solvent, especially a hydrocarbon, in which monomer is sparingly soluble. Initiator, especially amine, and chain-transfer agent are also fed to the reactor (5,16,17). The reaction is quite exothermic and polymerisation temperature is maintained below 75°C (typically near 40°C) by evaporation of the solvent. Polymer is not soluble in the solvent and precipitates early in the reaction. 

The enthalpy of the copolymerization of trioxane is such that bulk polymerization is feasible. For production, molten trioxane, initiator, and comonomer are fed to the reactor a chain-transfer agent is in eluded if desired. Polymerization proceeds in bulk with precipitation of polymer and the reactor must supply enough shearing to continually break up the polymer bed, reduce particle size, and provide good heat transfer. The mixing requirements for the bulk polymerization of trioxane have been reviewed (22). Raw copolymer is obtained as fine emmb or flake containing imbibed formaldehyde and trioxane which are substantially removed in subsequent treatments which may be combined with removal of unstable end groups. 

The molecular weight of a polymer can be controlled through the use of a chain-transfer agent, as well as by initiator concentration and type, monomer concentration, and solvent type and temperature. Chlorinated aUphatic compounds and thiols are particularly effective chain-transfer agents used for regulating the molecular weight of acryUc polymers (94). Chain-transfer constants (C at 60°C) for some typical agents for poly(methyl acrylate) are as follows (87) ... 

If a linear mbber is used as a feedstock for the mass process (85), the mbber becomes insoluble in the mixture of monomers and SAN polymer which is formed in the reactors, and discrete mbber particles are formed. This is referred to as phase inversion since the continuous phase shifts from mbber to SAN. Grafting of some of the SAN onto the mbber particles occurs as in the emulsion process. Typically, the mass-produced mbber particles are larger (0.5 to 5 llm) than those of emulsion-based ABS (0.1 to 1 llm) and contain much larger internal occlusions of SAN polymer. The reaction recipe can include polymerization initiators, chain-transfer agents, and other additives. Diluents are sometimes used to reduce the viscosity of the monomer and polymer mixture to faciUtate processing at high conversion. The product from the reactor system is devolatilized to remove the unreacted monomers and is then pelletized. Equipment used for devolatilization includes single- and twin-screw extmders, and flash and thin film evaporators. Unreacted monomers are recovered for recycle to the reactors to improve the process yield. 

An example of a commercial semibatch polymerization process is the early Union Carbide process for Dynel, one of the first flame-retardant modacryhc fibers (23,24). Dynel, a staple fiber that was wet spun from acetone, was introduced in 1951. The polymer is made up of 40% acrylonitrile and 60% vinyl chloride. The reactivity ratios for this monomer pair are 3.7 and 0.074 for acrylonitrile and vinyl chloride in solution at 60°C. Thus acrylonitrile is much more reactive than vinyl chloride in this copolymerization. In addition, vinyl chloride is a strong chain-transfer agent. To make the Dynel composition of 60% vinyl chloride, the monomer composition must be maintained at 82% vinyl chloride. Since acrylonitrile is consumed much more rapidly than vinyl chloride, if no control is exercised over the monomer composition, the acrylonitrile content of the monomer decreases to approximately 1% after only 25% conversion. The low acrylonitrile content of the monomer required for this process introduces yet another problem. That is, with an acrylonitrile weight fraction of only 0.18 in the unreacted monomer mixture, the low concentration of acrylonitrile becomes a rate-limiting reaction step. Therefore, the overall rate of chain growth is low and under normal conditions, with chain transfer and radical recombination, the molecular weight of the polymer is very low. 

Suspension polymerization of VDE in water are batch processes in autoclaves designed to limit scale formation (91). Most systems operate from 30 to 100°C and are initiated with monomer-soluble organic free-radical initiators such as diisopropyl peroxydicarbonate (92—96), tert-huty peroxypivalate (97), or / fZ-amyl peroxypivalate (98). Usually water-soluble polymers, eg, cellulose derivatives or poly(vinyl alcohol), are used as suspending agents to reduce coalescence of polymer particles. Organic solvents that may act as a reaction accelerator or chain-transfer agent are often employed. The reactor product is a slurry of suspended polymer particles, usually spheres of 30—100 pm in diameter they are separated from the water phase thoroughly washed and dried. Size and internal stmcture of beads, ie, porosity, and dispersant residues affect how the resin performs in appHcations. 

Cha.in-Tra.nsferAgents. The most commonly employed chain-transfer agents ia emulsion polymerisation are mercaptans, disulfides, carbon tetrabromide, and carbon tetrachloride. They are added to control the molecular weight of a polymer, by transferring a propagating radical to the chain transfer agent AX (63) ... 

The newly formed short-chain radical A then quickly reacts with a monomer molecule to create a primary radical. If subsequent initiation is not fast, AX is considered an inhibitor. Many have studied the influence of chain-transfer reactions on emulsion polymerisation because of the interesting complexities arising from enhanced radical desorption rates from the growing polymer particles (64,65). Chain-transfer reactions are not limited to chain-transfer agents. Chain-transfer to monomer is ia many cases the main chain termination event ia emulsion polymerisation. Chain transfer to polymer leads to branching which can greatiy impact final product properties (66). 

Chain transfer to solvent is an important factor in controlling the molecular weight of polymers prepared by this method. The chain-transfer constants for poly(methyl methacrylate) in various common solvents (C) and for various chain-transfer agents are Hsted in Table 10. 

Both propylene and isobutylene ate comonomers that are incorporated along the chain, resulting in additional short-chain branching. One important factor in controlling polymer crystallinity is the choice of chain-transfer agent. Ethane and methane, for example, are inefficient agents whose presence in the monomer feed stream must be considered in reaction control. 

The compound R X is a chain-transfer agent, with X usually H or Cl. The net effect of chain transfer is to kill a growing chain and start a new one in its place, thus shortening the chains. Mercaptan chain-transfer agents ate often used to limit molecular weight, but under appropriate conditions, almost anything in the reaction mass (solvent, dead polymer, initiator) can act as a chain-transfer agent to a certain extent. 

Telomerization. Polymerization of DAP is accelerated by telogens such as CBr, which are more effective chain-transfer agents than the monomer itself (65) gelation is delayed. The telomers are more readily cured in uv than DAP prepolymers. In telomerizations with CCl with peroxide initiator, at a DAP/CCl ratio of 20, the polymer recovered at low conversion has a DP of 12 (66). 

S = excited sensitizer, R = chain-transfer agent radical, M = monomer, M = monomer radical, and P = polymer. 

In mbber production, the thiol acts as a chain transfer agent, in which it functions as a hydrogen atom donor to one mbber chain, effectively finishing chain growth for that polymer chain. The sulfur-based radical then either terminates with another radical species or initiates another chain. The thiol is used up in this process. The length of the mbber polymer chain is a function of the thiol concentration. The higher the concentration, the shorter the mbber chain and the softer the mbber. An array of thiols have subsequendy been utilized in the production of many different polymers. Some of these apphcations are as foUow ... 

Buffers are frequently added to emulsion recipes and serve two main purposes. The rate of hydrolysis of vinyl acetate and some comonomers is pH-sensitive. Hydrolysis of monomer produces acetic acid, which can affect the initiator, and acetaldehyde which as a chain-transfer agent may lower the molecular weight of the polymer undesirably. The rates of decomposition of some initiators are affected by pH and the buffer is added to stabilize those rates, since decomposition of the initiator frequently changes the pH in an unbuffered system. Vinyl acetate emulsion polymerization recipes are usually buffered to pH 4—5, eg, with phosphate or acetate, but buffering at neutral pH with bicarbonate also gives excellent results. The pH of most commercially available emulsions is 4—6. 

Often a chain-transfer agent is added to vinyl acetate polymerizations, whether emulsion, suspension, solution, or bulk, to control the polymer molecular weight. Aldehydes, thiols, carbon tetrachloride, etc, have been added. Some emulsion procedures call for the recipe to include a quantity of preformed PVAc emulsion and sometimes antifoamers must be added (see Foams). 

Solution Polymerization. Solution polymerization of vinyl acetate is carried out mainly as an intermediate step to the manufacture of poly(vinyl alcohol). A small amount of solution-polymerized vinyl acetate is prepared for the merchant market. When solution polymerization is carried out, the solvent acts as a chain-transfer agent, and depending on its transfer constant, has an effect on the molecular weight of the product. The rate of polymerization is also affected by the solvent but not in the same way as the degree of polymerization. The reactivity of the solvent-derived radical plays an important part. Chain-transfer constants for solvents in vinyl acetate polymerizations have been tabulated (13). Continuous solution polymers of poly(vinyl acetate) in tubular reactors have been prepared at high yield and throughput (73,74). 

---