Polyester methacrylates

Dimethicone, silanol-terminated reactive fluid, polyester/methacrylic resin modification Methicone... 

Unsaturated polyester Methacrylate, polyether 3-Methacryloxypropyltrimethoxysilane, polyelherfunctional trimethoxysOane... 

Bjorkner B (1982) Sensitization capacity of polyester methacrylate in ultraviolet curing inks tested in the guinea pig. Acta Derm Venereol 62 153... 

Maleic anhydride Maleic esters Polyester methacrylate Methyl methacrylate Diethylene glycol maleate... 

The composite resin industry is the main exception with respect to the selective choice of reactive diluents. Within this industry, styrene is used as well as reactive diluent (known in combination with unsaturated polyesters). Methacrylates are then often referred to as - chemically erroneously - vinyl esters. 

Uses. The a2obisnitriles have been used for bulk, solution, emulsion, and suspension polymeri2ation of all of the common vinyl monomers, including ethylene, styrene vinyl chloride, vinyl acetate, acrylonitrile, and methyl methacrylate. The polymeri2ations of unsaturated polyesters and copolymeri2ations of vinyl compounds also have been initiated by these compounds. 

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acryUc sheet. PMMA is also used in mol ding and extmsion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acryUc latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic stmcture, acetone is found in the following major end use products acryUc sheet mol ding resins, impact modifiers and processing aids, acryUc film, ABS and polyester resin modifiers, surface coatings, acryUc lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see METHACRYLIC ACID AND DERIVATIVES METHACRYLIC POLYMERS). 

The white cell adsorption filter layer is typically of a nonwoven fiber design. The biomaterials of the fiber media are surface modified to obtain an optimal avidity and selectivity for the different blood cells. Materials used include polyesters, eg, poly(ethylene terephthalate) and poly(butylene terephthalate), cellulose acetate, methacrylate, polyamides, and polyacrylonitrile. Filter materials are not cell specific and do not provide for specific filtration of lymphocytes out of the blood product rather than all leukocytes. 

A review covers the preparation and properties of both MABS and MBS polymers (75). Literature is available on the grafting of methacrylates onto a wide variety of other substrates (76,77). Typical examples include the grafting of methyl methacrylate onto mbbers by a variety of methods chemical (78,79), photochemical (80), radiation (80,81), and mastication (82). Methyl methacrylate has been grafted onto such substrates as cellulose (83), poly(vinyl alcohol) (84), polyester fibers (85), polyethylene (86), poly(styrene) (87), poly(vinyl chloride) (88), and other alkyl methacrylates (89). 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

Poly(methyl methacrylate) and poly(vinyl acetate) precipitate from the resin solution as it cures. This mechanism offsets the contraction in volume as the polyester resin cross-links, resulting in a nonshrinking thermoset. Other polymer additives such as poly(butylene adipate) provide similar shrinkage... 

DADC may be polymerised industrially with small amounts of other miscible Hquid monomers. Some acryflc ester monomers and maleic anhydride may accelerate polymerisation. Copolymerisation with methacrylates, diaHyl phthalates, triaHyl isocyanurate, maleates, maleimides, and unsaturated polyesters are among the examples in the early Hterature. Copolymers of DADC with poly-functional unsaturated esters give castings of high clarity for eyeglass lenses and other optical appHcations (20). 

Diallyl terephthalate [1026-92-2] is utilized less, but lenses made of copolymers with triaHyl cyanurate and methacrylates have been suggested (62). Diallyl tetrabromophthalate and tetrachlorophthalate polymers have been proposed for electronic circuit boards of low flammabiUty (63). They are uv-curable and solder-resistant. Copolymers with unsaturated polyester, vinyl acetate and DAP have been studied (64). 

TriaUyl cyanurate is used as a comonomer in small amounts with methacrylate esters and unsaturated polyesters. The addition of 5% or more of TAC to MMA in castings improves heat and solvent resistance as weU as thermooxidative stabUity (99). For optical appUcations, up to 20% TAC has been suggested. Reactivity ratios for TAC and methacrylate esters have been reported (100). 

Small amounts of TAIC together with DAP have been used to cure unsaturated polyesters in glass-reinforced thermo sets (131). It has been used with polyfunctional methacrylate esters in anaerobic adhesives (132). TAIC and vinyl acetate are copolymerized in aqueous suspension, and vinyl alcohol copolymer gels are made from the products (133). Electron cure of poly(ethylene terephthalate) moldings containing TAIC improves heat resistance and transparency (134). 

Polymers. The molecular weights of polymers used in high energy electron radiation-curable coating systems are ca 1,000—25,000 and the polymers usually contain acryUc, methacrylic, or fumaric vinyl unsaturation along or attached to the polymer backbone (4,48). Aromatic or aUphatic diisocyanates react with glycols or alcohol-terrninated polyether or polyester to form either isocyanate or hydroxyl functional polyurethane intermediates. The isocyanate functional polyurethane intermediates react with hydroxyl functional polyurethane and with acryUc or methacrylic acids to form reactive p olyurethanes. 

Reactive (unsaturated) epoxy resins (qv) are reaction products of multiple glycidyl ethers of phenoHc base polymer substrates with methacrylic, acryhc, or fumaric acids. Reactive (unsaturated) polyester resins are reaction products of glycols and diacids (aromatic, aUphatic, unsaturated) esterified with acryhc or methacrylic acids (see POLYESTERS,unsaturated). Reactive polyether resins are typically poly(ethylene glycol (600) dimethacrylate) or poly(ethylene glycol (400) diacrylate) (see PoLYETPiERs). 

In contrast to the situation with high sohds coatings, acryhc resins are, in general, more appropriate than polyesters for water-reducible baking coatings. Acryhc copolymers using acryhc acid (2-propenoic acid) [79-10-7], (see Acrylic acid and derivatives) and 2-hydroxyethyl methacrylate as... 

Acrylates and methacrylates, which are critical to the production of polyesters, plastics, latexes, and synthetic lubricants, can also be produced from these oxygenated intermediates. 

In the case of polar polymers the situation is more complex, since there are a large number of dipoles attached to one chain. These dipoles may either be attached to the main chain (as with poly(vinyl chloride), polyesters and polycarbonates) or the polar groups may not be directly attached to the main chain and the dipoles may, to some extent, rotate independently of it, e.g. as with poly(methyl methacrylate). 

---