Poly syndiotactic radical

Poly(acrylic acid) and Poly(methacrylic acid). Poly(acryHc acid) (8) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (36) (with cross-linker for superadsorber appHcations) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78° C provides a syndiotactic form (37) that can be hydrolyzed to syndiotactic PAA. From academic studies, alkaline hydrolysis of the methyl ester requires a lower time than acid hydrolysis of the polymeric ester, and can lead to oxidative degradation of the polymer (38). Po1y(meth acrylic acid) (PMAA) (9) is prepared only by the direct polymerization of the acid monomer it is not readily obtained by the hydrolysis of methyl methacrylate. 

The nmr spectmm of PVAc iu carbon tetrachloride solution at 110°C shows absorptions at 4.86 5 (pentad) of the methine proton 1.78 5 (triad) of the methylene group and 1.98 5, 1.96 5, and 1.94 5, which are the resonances of the acetate methyls iu isotactic, heterotactic, and syndiotactic triads, respectively. Poly(vinyl acetate) produced by normal free-radical polymerization is completely atactic and noncrystalline. The nmr spectra of ethylene vinyl acetate copolymers have also been obtained (33). The ir spectra of the copolymers of vinyl acetate differ from that of the homopolymer depending on the identity of the comonomers and their proportion. 

Microstructure. Interest in PVP microstmcture and the potential for tacticity has been reviewed (39,40). PVP generated by free radicals has been shown to be atactic except when polymerization is conducted in water. In this case some syndiotacticity is observed (40). In the presence of syndiotactic templates of poly(methacryhc acid) (or poly(MAA)), VP will apparentiy polymerize with syndiotactic microstmcture, although proof is lacking (41—45). The reverse, polymerization of MAA in the presence of PVP, affords, as expected, atactic poly(MAA) (46,47). 

Commercial poly(methyl methacrylate) is a transparent material, and microscopic and X-ray analyses generally indicate that the material is amorphous. For this reason the polymer was for many years considered to be what is now known as atactic in structure. It is now, however, known that the commercial material is more syndiotactic than atactic. (On one scale of assessment it might be considered about 54% syndiotactic, 37% atactic and 9% isotactic. Reduction in the temperature of free-radical polymerisation down to -78°C increases the amount of syndiotacticity to about 78%). 

A radical initiator based on the oxidation adduct of an alkyl-9-BBN (47) has been utilized to produce poly(methylmethacrylate) (48) (Fig. 31) from methylmethacrylate monomer by a living anionic polymerization route that does not require the mediation of a metal catalyst. The relatively broad molecular weight distribution (PDI = (MJM ) 2.5) compared with those in living anionic polymerization cases was attributed to the slow initiation of the polymerization.69 A similar radical polymerization route aided by 47 was utilized in the synthesis of functionalized syndiotactic polystyrene (PS) polymers by the copolymerization of styrene.70 The borane groups in the functionalized syndiotactic polystyrenes were transformed into free-radical initiators for the in situ free-radical graft polymerization to prepare s-PS-g-PMMA graft copolymers. 

Since radical polymerizations are generally carried out at moderately high temperatures, most of the resulting polymers are highly atactic. This does not mean that there is a complete absence of syndiotacticity. There is a considerable difference in the extent of syndiotacticity from one polymer to another. Thus, methyl methacrylate has a much greater tendency toward syndiotactic placement than vinyl chloride. Whereas the poly(vinyl chloride) produced at the usual commerical polymerization temperature ( 60°C) is essential completely atactic, that is, (r) (m) 0.5, this is not the case for poly(methyl methacrylate). The polymerization of MMA, usually carried out at temperatures up to 100°C, yields polymers with appreciable syndiotacticity—(r) is 0.73 at 100°C. The difference is a consequence of the fact that MMA is a 1,1-disubstituted ethylene, leading to greater repulsions between substituents in adjacent monomer units. 

Because of acid-catalyzed hydrolysis of N-vinylpyrrolidone in water, polymerization was carried out in organic solvent - DMF. Three types of samples of poly(methacrylic acid) were used syndiotactic - obtained by radiation polymerization, atactic - obtained by radical polymerization, and isotactic - obtained by hydrolysis of isotactic poly(methyl methacrylate). It was found that in all cases the rate enhancement appeared in comparison with the blank polymerization (without template). The rate enhancement became more pronounced with increasing chain length and syndiotacticity of the template. According to the authors, the rate enhancement is connected with the stronger complex formation between poly(vinyl pyrrolidone) and syndiotactic poly(methacrylic acid) then with isotactic template. This conclusion was supported by turbimetric titration in DMF/DMSO system and by model considerations. It is worth noting, however, that... 

Many radical polymerization systems were examined hy Challa at a/. A number of papers were devoted to polymerization of methyl methacrylate, MM, in the presence of poly(methyl methacrylate). The role of tacticity of template was stressed. Isotactic PMM forms stereocomplex with syndiotactic PMM. Polymerizations of MM in the presence of isotactic PMM were carried out and the product (template + daughter polymer) was analyzed by NMR. When MM is polymerized in the polar solvent in the presence... 

Polymerization. Poly (methyl methacrylate) was obtained commercially. The polymers of other methacrylates and their copolymers were prepared in toluene with 2,2 -azobisisobutyronitrile (AIBN) at 60 °C. All the polymers prepared free radically were syndiotactic or atactic. Isotactic poly(a,a-dimethylbenzyl methacrylate) was obtained using C6H5MgBr as the initiator in toluene at 0°C. Poly(methacrylic acid) was prepared in water using potassium persulfate at as the initiator 60 °C. The molecular weights, glass transition temperatures and tacticities of the polymethacrylates are summarized in Table I. 

Poly(acrylic acid) and Poly(rnethacrylic acid). Poly(acrylic acid) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (widi cross-linker for superadsorber applications) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78°C provides a syndiotactic form that can be hydrolyzed to syndiotactic PAA. 

Vanadium-containing coordination centres producing syndiotactic polypropylene at 195 K can be transformed to radical centres simply by raising the temperature to 298 K [252]. In this way, Japanese authors have prepared the copolymer poly(propene)-Wocfc-poly(methylmethacrylate). The radical end is probably formed by homolytic splitting of the C—V bond, and it can be stabilized by the V ion. The authors state that, in this way, two-component blocks of polypropylene with various polymers propagating by the radical mechanism can be prepared. 

For free-radical polymerization, classical results have been obtained concerning the tacticity of hydroxytelechelic poly(methyl methacrylate)109) and copolymers, 46) initiated by H202/UV. Most of the units are in a syndiotactic (64 %) or heterotactic (30 %) configuration. For poly(vinyl acetate) obtained in the presence of H202 at 120 °C 98), the polymer contains less syndiotactic (22%) and somewhat more heterotactic (38%) units with 80% of head-to-tail linkage mode. For the copolymerization of alkyl methacrylate by the H202/UV system113) quite different results, explained by the nature of the medium, especially by the solubility effect (see Table 1.1), have been obtained. 

In a few instances, poly(methylmethacrylate) has been prepared exceeding the syndiotactic content attainable through a free ion pair or free radical mechanism at the same temperature [20]. A possible mechanism for homogeneous syndiotactic propagation has been proposed. However, none of these highly syndiotactic systems has been reproducible [10], and it appears to be no real need for such a mechanism. Coordination-directed stereospecific polymerization of methyl methacrylate seems to be limited to isotactic propagation. 

Examples of these three types of structural arrangements are known in general, stereoregular polymers are synthesized by the use of coordination catalysts, whereas atactic polymers are formed by uncoordinated catalysts such as free radicals or free ions. Stereoregular polymers are often partially crystalline, and usually, even the isotactic and syndiotactic isomers have different properties. For example, isotactic poly(methyl methacrylate) (PMMA) has a glass-transition temperature of 35 °C, while that of the syndiotactic polymer is 105 °C. 

The G-SmA-N-I transition temperatures of syndiotactic poly(6-[4 -(4"- -bu-toxyphenoxycarbonyl)phenoxyl)phenoxy]-hexyl methacrylate prepared by aluminum porphyrin initiated polymerizations also level off at approximately 25 repeat units [91]. Similarly, the glass and nematic-isotropic transition temperatures of poly[6-(4 -methoxy-4"- Z-methylstilbeneoxy)hexyl methacrylate] prepared by group transfer polymerization become independent of molecular weight at approximately 20 repeat units [48]. Both polymethacrylates reach the same transition temperatures as the corresponding polymers prepared by radical polymerizations, which have nearly identical tacticities. 

Syndiotactic Poly(vinyI pivalate) Radical polymeriation of VP at NMR, DSC r 69% (6)... 

---