PHEMA Poly

The soapless seeded emulsion copolymerization method was used for producing uniform microspheres prepared by the copolymerization of styrene with polar, functional monomers [115-117]. In this series, polysty-rene-polymethacrylic acid (PS/PMAAc), poly sty rene-polymethylmethacrylate-polymethacrylic acid (PS/ PMMA/PMAAc), polystyrene-polyhydroxyethylmeth-acrylate (PS/PHEMA), and polystyrene-polyacrylic acid (PS/PAAc) uniform copolymer microspheres were synthesized by applying a multistage soapless emulsion polymerization process. The composition and the average size of the uniform copolymer latices prepared by multistage soapless emulsion copolymerization are given in Table 11. 

Interpenetrating networks (IPNs) composed of different proportions of PCL and poly-2-hydroxyethyl methacrylate (pHEMA) have... 

The aim of this paper is to report the bonding of heparin on poly(ethylene terephthalate) films containing an acrylic hydrogel (pHEMA), the method of preparation of the support material and some of its properties. 

Drug Release from PHEMA-l-PIB Networks. Amphiphilic networks due to their distinct microphase separated hydrophobic-hydrophilic domain structure posses potential for biomedical applications. Similar microphase separated materials such as poly(HEMA- -styrene-6-HEMA), poly(HEMA-6-dimethylsiloxane- -HEMA), and poly(HEMA-6-butadiene- -HEMA) triblock copolymers have demonstrated better antithromogenic properties to any of the respective homopolymers (5-S). Amphiphilic networks are speculated to demonstrate better biocompatibility than either PIB or PHEMA because of their hydrophilic-hydrophobic microdomain structure. These unique structures may also be useful as swellable drug delivery matrices for both hydrophilic and lipophilic drugs due to their amphiphilic nature. Preliminary experiments with theophylline as a model for a water soluble drug were conducted to determine the release characteristics of the system. Experiments with lipophilic drugs are the subject of ongoing research. 

Simple physical entanglements can be sufficient to produce a structurally stable gel if the polymer has a sufficiently great molecular weight and if the polymer is of only modest hydrophilicity. In this case, the polymer will swell in water without dissolving, even in the absence of covalent cross-links. Poly(2-hydroxyethyl methacrylate) (PHEMA) is a prominent example of this type of hydrogel when uncross-linked, it will dissolve in 1,2-propanediol but only swell in water. 

It is possible for Q or q to range from 1.2 to over 1000 this translates to an EWC range of 20% to over 99%. A commonly used hydrogel for drug delivery, poly(2-hydroxyethyl methacrylate) (PHEMA), has a q of about 1.7 or an EWC of about 40%. 

Polymeric particles can be constructed from a number of different monomers or copolymer combinations. Some of the more common ones include polystyrene (traditional latex particles), poly(styrene/divinylbenzene) copolymers, poly(styrene/acrylate) copolymers, polymethylmethacrylate (PMMA), poly(hydroxyethyl methacrylate) (pHEMA), poly(vinyltoluene), poly(styrene/butadiene) copolymers, and poly(styrene/vinyltoluene) copolymers. In addition, by mixing into the polymerization reaction combinations of functional monomers, one can create reactive or functional groups on the particle surface for subsequent coupling to affinity ligands. One example of this is a poly(styrene/acrylate) copolymer particle, which creates carboxylate groups within the polymer structure, the number of which is dependent on the ratio of monomers used in the polymerization process. 

The integrated planar silver chloride electrode uses a thin layer of 150 pm polymer that consists of a heat curing epoxy resin poly-hydroxy-ethylmethacrylate (PHEMA) to immobilize the KC1 electrolyte. The potential drift of the reference electrode reduced to 59 pV/h after a conditioning phase of several hours. However, this reference electrode was only used for P02 measurement, while an external reference electrode was used for pH measurement. 

Poly(2-hydroxyethyl methacrylate) (PHEMA) has been the most widely used polymer in drug delivery applications. It is an extremely hydrophilic... 

Another hydrophilic polymer that has received attention is poly(vinyl alcohol) (PVA). This material holds tremendous promise as a biological drug delivery device because it is nontoxic, hydrophilic and exhibits good mucoadhesive properties (Peppas, 1987). In one of the first applications of this material, Langer and Folkman (1976) investigated the use of copolymers of PHEMA (Hydron ) and PVA as delivery vehicles for polypeptide drugs. 

PEG, 13 736-737 pH-sensitive, 13 743 PHEMA, 13 733-734, 749, 750 poly(acrylamide)-based, 13 737-738 poly(acrylic/methacrylic acid), 13 734 poly(N-vinyl 2-pyrrolidone), 13 739 polyurethane, 13 739 porous, 13 750-751 preparation methods for, 13 731-732 properties and preparation of,... 

Poly(2-hydroxyethyl methylmethacrylate) (PHEMA) has been used as a matrix for the detection of metal ions. 79 A near-IR dye (2,3-naphthalocyanine-tetrasulphonic acid) was immobilized in a polymer matrix which was attached to the reaction phase of two optical fibers. A mixture of the matrix and the dye was prepared by mixing PHEMA and dye in a 60/40 ratio. The optimum ratio of polymer and dye were not fully investigated. The dye/polymer mixture was applied to the tip of the probe in 10-to 15-/iL aliquots forming a thin coating on the probe after solvent evaporation as shown in Figure 7.9. 

An NIR optical fiber for the detection of metal ions has been developed In a controlled environment, the optical probe with immobilized NIR dye was immersed in vials containing different metal ions varying in concentrations from 10 9 to 1CT2 M. The probe response was obtained by the diffusion of the metal ions through the poly(2-hydroxyethyl methacrylate) (PHEMA) polymer matrix where the dye was covalently attached. On complexation of the metal with the dye, the intensity of the fluorescence signal increased. 

Fig. 11 Chemical formulas of poly(acryl amide) (PAAm), poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(t-butyl acrylate) (PtBA), and poly(acrylic acid) (PAA), and poly(dimethyl aminoethyl methacrylate) (PDMAEMA)...

Fig. 43 Dry thickness of poly(2-hydroxyethyl methacrylate) (PHEMA) as a function of the position on the substrate (lower panel). The fluorescence microscopy images show the corresponding structure of fibrinogen at three positions along the PHEMA gradient (upper panel). (Reproduced with permission from [164])...

Fig. 15. Effect of the diluent volume fraction on the temperature of the T and T d dispersions of poly(2-hydroxyethyl methacrylate) Ethylene glycol (—, O) formamide (-.-, 3) water (—, ) propanol (..., >). The curves have been calculated according to Eq. (13), for the system PHEMA-water drawn through experimental points...

---