Poly incorporated

D-Mevalonic acid is the fundamental intermediate in the biosynthesis of the terpenoids and steroids, together classed as poly-isoprenoids. The biogenetic isoprene unit is isopentenyl pyrophosphate which arises by enzymic decarboxylation-dehydration of mevalonic acid pyrophosphate. D-Mevalonic acid is almost quantitatively incorporated into cholesterol synthesized by rat liver homogenates. 

The polymer described in the last problem is commercially called poly (phenylene oxide), which is not a proper name for a molecule with this structure. Propose a more correct name. Use the results of the last problem to criticize or defend the following proposition The experimental data for dimer polymerization can be understood if it is assumed that one molecule of water and one molecule of monomer may split out in the condensation step. Steps involving incorporation of the monomer itself (with only water split out) also occur. 

The many commercially attractive properties of acetal resins are due in large part to the inherent high crystallinity of the base polymers. Values reported for percentage crystallinity (x ray, density) range from 60 to 77%. The lower values are typical of copolymer. Poly oxymethylene most commonly crystallizes in a hexagonal unit cell (9) with the polymer chains in a 9/5 helix (10,11). An orthorhombic unit cell has also been reported (9). The oxyethylene units in copolymers of trioxane and ethylene oxide can be incorporated in the crystal lattice (12). The nominal value of the melting point of homopolymer is 175°C, that of the copolymer is 165°C. Other thermal properties, which depend substantially on the crystallization or melting of the polymer, are Hsted in Table 1. See also reference 13. 

Brominated Styrene. Dibromostyrene [31780-26 ] is used commercially as a flame retardant in ABS (57). Tribromostyrene [61368-34-1] (TBS) has been proposed as a reactive flame retardant for incorporation either during polymerization or during compounding. In the latter case, the TBS could graft onto the host polymer or homopolymerize to form poly(tribromostyrene) in situ (58). 

Alternative technology for modifying a poly(aLkylene terephthalate) by incorporation of a phosphinate stmcture has been developed by Enichem. Phosphinate units of the stmcture —P(CgH5) (0)CH20— are introduced into a polyester such as PET or PBT by transesterification with an oligomer comprised of the aforementioned units (136). 

Thermoform able sheet may be mono- or multilayer with the latter produced by lamination or coextmsion. Multilayers are employed to incorporate high oxygen-barrier materials between stmctural or high water-vapor barrier plastics. Both ethylene vinyl alcohol copolymers and poly(vinyhdene chloride) (less often) are used as high oxygen-barrier interior layers with polystyrene or polypropylene as the stmctural layers, and polyolefin on the exterior for sealing. 

The resihency and dyeabihty of poly(vinyl alcohol) fibers is improved by a process incorporating -hydroxybenzaldehyde to provide a site for the formation of a stable Mannich base. Hydroxyl groups on the fiber are converted to acetal groups by -hydroxybenzaldehyde. Subsequent reaction with formaldehyde and ammonia or an alkylamine is rapid and forms a stable Mannich base that is attached to the polymer backbone (94). 

Applications. Polymers with small alkyl substituents, particularly (13), are ideal candidates for elastomer formulation because of quite low temperature flexibiUty, hydrolytic and chemical stabiUty, and high temperature stabiUty. The abiUty to readily incorporate other substituents (ia addition to methyl), particularly vinyl groups, should provide for conventional cure sites. In light of the biocompatibiUty of polysdoxanes and P—O- and P—N-substituted polyphosphazenes, poly(alkyl/arylphosphazenes) are also likely to be biocompatible polymers. Therefore, biomedical appHcations can also be envisaged for (3). A third potential appHcation is ia the area of soHd-state batteries. The first steps toward ionic conductivity have been observed with polymers (13) and (15) using lithium and silver salts (78). 

Short segments of poly(dG—dC) incorporated within plasmids, or citcular DNA, adopt the Z-conformation under negative superhehcal stress. This left-handed DNA may be important in genetic control. On the other hand, the stmctural alteration of the helix requited in a B-to-Z transition within a plasmid is radical, and would involve either a multistep mechanism or the complete melting and reformation of helix. The improbability of such transitions has led to questions concerning the feasibility of a biological role for Z-DNA. 

Polymers. In combination with various metal salts, sorbitol is used as a stabilizer against heat and light in poly(vinyl chloride) (qv) resins and, with a phenohc antioxidant, as a stabilizer in uncured styrene—butadiene mbber (qv) compositions and in polyolefins (see Heat stabilizers Olefin POLYMERS Rubbercompounding). Heat-sealable films are prepared from a dispersion of sorbitol and starch in water (255). Incorporation of sorbitol in coUagen films gready restricts their permeabiUty to carbon dioxide (256). 

Eatty acid ethoxylates are used extensively in the textile industry as emulsifiers for processing oils, antistatic agents (qv), softeners, and fiber lubricants, and as detergents in scouring operations. They also find appHcation as emulsifiers in cosmetic preparations and pesticide formulations. Eatty acid ethoxylates are manufactured either by alkaH-catalyzed reaction of fatty acids with ethylene oxide or by acid-catalyzed esterification of fatty acids with preformed poly(ethylene glycol). Deodorization steps are commonly incorporated into the manufacturing process. 

Water-borne polyurethane coatings are formulated by incorporating ionic groups into the polymer backbone. These ionomers are dispersed in water through neutrali2ation. The experimental 1,12-dodecane diisocyanate (C12DI Du Pont) is especially well suited for the formation of water-borne polyurethanes because of its hydrophobicity (39). Cationomers are formed from IPDI, /V-methyIdiethan olamine, and poly(tetramethylene adipate diol)... 

Poly(ethyl methacrylate) (PEMA) yields truly compatible blends with poly(vinyl acetate) up to 20% PEMA concentration (133). Synergistic improvement in material properties was observed. Poly(ethylene oxide) forms compatible homogeneous blends with poly(vinyl acetate) (134). The T of the blends and the crystaUizabiUty of the PEO depend on the composition. The miscibility window of poly(vinyl acetate) and its copolymers with alkyl acrylates can be broadened through the incorporation of acryUc acid as a third component (135). A description of compatible and incompatible blends of poly(vinyl acetate) and other copolymers has been compiled (136). Blends of poly(vinyl acetate) copolymers with urethanes can provide improved heat resistance to the product providing reduced creep rates in adhesives used for vinyl laminating (137). 

Adhesives. Poly(vinyl alcohol) is used as a component in a wide variety of general-purpose adhesives to bond ceUulosic materials, such as paper and paperboard, wood textiles, some metal foils, and porous ceramic surfaces, to each other. It is also an effective binder for pigments and other finely divided powders. Both fully and partially hydrolyzed grades are used. Sensitivity to water increases with decreasing degree of hydrolysis and the addition of plasticizer. Poly(vinyl alcohol) in many appHcations is employed as an additive to other polymer systems to improve the cohesive strength, film flexibiUty, moisture resistance, and other properties. It is incorporated into a wide variety of adhesives through its use as a protective coUoid in emulsion p olymerization. 

The earliest study describing vulcanised polymers of esters of acryUc acid was carried out in Germany by Rohm (2) before World War I. The first commercial acryUc elastomers were produced in the United States in the 1940s (3—5). They were homopolymers and copolymers of ethyl acrylate and other alkyl acrylates, with a preference for poly(ethyl acrylate) [9003-32-17, due to its superior balance of properties. The main drawback of these products was the vulcanisation. The fully saturated chemical stmcture of the polymeric backbone in fact is inactive toward the classical accelerators and curing systems. As a consequence they requited the use of aggressive and not versatile compounds such as strong bases, eg, sodium metasiUcate pentahydrate. To overcome this limitation, monomers containing a reactive moiety were incorporated in the polymer backbone by copolymerisation with the usual alkyl acrylates. 

Heteroaromatic ring stmctures can also be incorporated into poly(arylene vinylene) stmctures using the same precursor polymer method shown for PPV. Poly(thienylene vinylene) (13) (113—118) and poly(furylene vinylene) (14) (119,120) have been prepared in this manner. In addition, alkoxy-substituted poly(thienylene vinylenes) (15) (119,121) have been synthesized. Various copolymers containing phenjiene, thienylene, and furylene moieties have also been studied (120,122,123). 

Other polymers can be more troublesome. Poly(vinyl chloride) requires the incorporation of stabilisers and even so may discolour and give off hydrochloric acid, the latter having a corrosive effect on many metals. At the same time some metals have a catalytic effect on this polymer so that care has to be taken in the construction of barrels, screws and other metal parts liable to come into contact with the polymer. 

---