Poly ester group

A large variety of newer poly(ether imide)s has been described. Included among these are perfluorinated polymers (96), poly(ester ether imide)s (97), poly(ether imide)s derived from A/,Ar-diamino-l,4,5,8-naphthalenetetracarboxyHcbisimide (98), and poly(arylene ether imide ketone)s (99). In addition, many other heterocyHc groups have been introduced into polyether systems, eg, poly(pyrazole ether)s (100) and poly(aryl ether phenylquinoxaLine)s (101) poly(aryl ether oxazole)s with trifluoromethyl groups (102) and polyethers with other heterolinkages, eg, poly(arylether azine)s (103). 

THE can be polymerized by many strongly acidic catalysts, but not all of them produce the requked bitimctional polyether glycol with a minimum of by-products. Several large-scale commercial polymerization processes are based on fluorosulfonic acid, HESO, catalysis, which meets all these requkements. The catalyst is added to THE at low temperatures and an exothermic polymerization occurs readily. The polymerization products are poly(tetramethylene ether) chains with sulfate ester groups (8). 

Polyesters are eneountered in many forms. They are important as laminating resins, moulding compositions, fibres, films, surface coating resins, rubbers and plasticisers. The common factor in these widely different materials is that they all contain a number of ester linkages in the main chain. (There are also a number of polymers such as poly(vinyl acetate) which contain a number of ester groups in side chains but these are not generally considered within the term polyester resins.)... 

The solubility parameter of poly(ethylene terephthalate) is about 21.8 MPa but because it is a highly crystalline material only proton donors that are capable of interaction with the ester groups are effective. A mixture of phenol and tetrachloroethane is often used when measuring molecular weights, which are about 20 000 in the case of commercial polymers. 

Fig. 7a, b. Kinetics of poly(p-nitrophenyl acrylate) chemical adsorption on aminopropyl-Aerosil at 25 °C in dimethylsulphoxide. Filled circles ester group content (pmol/g support), empty c/rc/ei p-nitrophenol release (pmol/g support), a — l%solution b — 5% solution [55]... 

Porous glass (PG) modified with covalently adsorbed poly(p-nitrophenyl acrylate), as described in Sect. 4.1, turned out to be a highly suitable carrier for immobilization of various biospecific ligands and enzymes. When the residual active ester groups of the carrier were blocked by ethanolamine, the immobilized ligands when bound to the solid support via hydrophilic and flexible poly(2-hydroxyethyl acrylamide). The effective biospecific binding provided by the ligands... 

The difficulties encountered in the early studies of anionic polymerization of methyl methacrylate arose from the unfortunate choice of experimental conditions the use of hydrocarbon solvents and of lithium alkyl initiators. The latter are strong bases. Even at —60 °C they not only initiate the conventional vinyl poly-addition, but attack also the ester group of the monomer yielding a vinyl ketone1, a very reactive monomer, and alkoxide 23). Such a process is described by the scheme. 

Based on these monomeric building blocks a series of four structurally related poly(iminocarbonates) were synthesized carrying either no pendant chains at all [poly(Dat-Tym) ], a N-benzyloxycarbonyl group as pendant chain [poly(Z-Tyr-Tym)], a hexyl ester group as pendant chain (poly(Dat-Tyr-Hex) ], or both types of pendant chains simultaneously (poly(CTTH)] (Fig. 7). 

The possibility exists that the acid used in hydrolysis could catalyze the hydrolysis of the succinic ester group in the middle of the telechelomer itself. Even though NMR ( H and C) cannot easily eliminate this possibility, we have evidence that such a hydrolysis did not take place. For instance, hydrolysis should result in the formation of poly(pivalolactone) which is insoluble both in methylene chloride and water, but no insolubles were evident. Also, the Gel Permeation Chromatograms do not show impurities in the product. 

In summary, we have examined several new methods for cleaving ester groups in poly(styrene-b-alkyl methacrylates). Short blocks of methyl methacrylate are very difficult to hydrolyze, but can be cleaved with reagents such as lithium iodide and potassium trimethylsilanolate. These latter reagents, however, result in side-reactions which appear to crosslink the polymer. 

Poly(vinyl alcohol) has the structure 10.67. Poly(vinyl acetate) is the fully esterified derivative of polyfvinyl alcohol), in which the -OH groups are replaced by -OCOCH3 groups. As indicated in Table 10.5, commercial polyvinyl sizes are effectively copolymers of polyfvinyl acetate) and polyfvinyl alcohol) that vary in the degree of saponification of the ester groups. These products may comprise 100% of either polymer, or combinations of the two monomers in any proportions. Crotonic acid (2-butenoic acid), widely used in the preparation of resins, may also be a component. This compound exhibits cis-trans isomerism (Scheme 10.17). The solid trans form is produced readily by catalysed rearrangement of the liquid cis isomer. 

Poly(vinyl alcohol) in which 10% of the ester groups remain dissolves readily in water. 

Copolymers of a-hydroxy acids and a-amino acids are one type of poly(ester-amide)s and are called polydepsipeptides (PDPs) [17]. Since some of natural occurring a-amino acids, typically Asp, Glu, lysine (Lys), cysteine (Cys), serine (Ser), and threonine (Thr), possess reactive (hydrophilic) side-chain groups, PDPs... 

Commercially available hyperbranched polymer, a poly(ester-amide) is currently being marketed by DSM under the product name Hybrane [13] (Figure 8.2). It is also a hydroxyl-functionalized product, but contains both amide and ester linkages. The synthesis is accomplished in two steps cyclic anhydrides are reacted with diisopropanolamine to give an amide-intermediate, possessing two hydroxyl groups and one carboxylic acid. The subsequent polymerization takes places via an oxazolinium intermediate which results in the formation of a... 

Strictly speaking, the term polyester ought to refer to a chemical compound containing many ester groups in each molecule. In practice, however, it usually refers to polymeric materials containing ester groups as major structural components of the main chains of the macromolecules of which the polymer is composed, and this is the sense in which it is used here. The term is not now usually applied to polymers that contain ester groups attached to the main chain either directly, as in cellulose triacetate, poly(vinyl acetate) or poly(methyl acrylate), or within short side-chains. 

---