Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Plastic oligomer

Lourdin, D., Ring, S.G., and Colonna, P. Study of plasticizer-oligomer and plasticizer-polymer interactions by dielectric analysis maltose-glycerol and amylose-glycerol-water systems, Carbohydr. Res., 306, 551, 1998. [Pg.76]

Polyester composition can be determined by hydrolytic depolymerization followed by gas chromatography (28) to analyze for monomers, comonomers, oligomers, and other components including side-reaction products (ie, DEG, vinyl groups, aldehydes), plasticizers, and finishes. Mass spectroscopy and infrared spectroscopy can provide valuable composition information, including end group analysis (47,101,102). X-ray fluorescence is commonly used to determine metals content of polymers, from sources including catalysts, delusterants, or tracer materials added for fiber identification purposes (28,102,103). [Pg.332]

Extmsion is a common way for soHd products such as plastics to emerge from closed manufacturing systems. Normally a polymer is hot when extmded and may contain additives and oligomers that are volatile at elevated tempera-tures. The result is Aiming at the extmder head. These fumes can result in employee annoyance, housekeeping problems, and, at worst, depending on composition, health ha2ards. [Pg.104]

Cyclopentadiene oligomers have been formed by vapor deposition of CPD on kaolin to afford a sorbant for removal of oil from water (71). They are also employed as coatings for controlling release rates of fertilizers (72). Thermal addition of sulfur to a mixture of DCPD and CPD oligomers has led to a number of beneficial appHcations such as waste water oil adsorbant powdery foams (73), plasticized backing for carpets and artificial turfs (74), and in modified sulfur cements for encapsulating low-level radioactive wastes (75). [Pg.435]

An EB-curable struetural adhesive formulation usually eonsists of one or more crosslinkable oligomeric resins or prepolymers, along with such additives as reactive diluents, plasticizers, and wetting agents. The oligomer is an important component in terms of the development of mechanical properties. The adhesive and cohesive properties depend on the crosslink density, chemical group substitution, and molecular organization within the polymer matrix. Adhesion is achieved... [Pg.1012]

Fatty acids, both saturated and unsaturated, have found a variety of applications. Brassilic acid (1,11-un-decanedicarboxylic acid [BA]), an important monomer used in many polymer applications, is prepared from erucic acid (Scheme 2), obtained from rapeseed and crambe abyssinica oils by ozonolysis and oxidative cleavage [127]. For example, an oligomer of BA with 1,3-butane diol-lauric acid system is an effective plasticizer for polyvinylchloride. Polyester-based polyurethane elastomers are prepared from BA by condensing with ethylene glycol-propylene glycol. Polyamides based on BA are known to impart moisture resistance. [Pg.419]

Ljungberg, N. and Wesslen, B. 2003. Tributyl citrate oligomers as plasticizers for polyjlactic add) Thermo-mechanical film properties and aging. Polymer 44 7679-7688. [Pg.38]

Polymer Devolatilization, Eractionation, and Plasticization Supercritical fluids may be used to extract solvent, monomers, and oligomers from polymers, including biomaterials. After extraction the pressure is reduced to atmospheric, leaving little residue in the... [Pg.16]

Applications Although Soxtec combines the best qualities of reflux and Soxhlet extractions up to now fairly little evidence has been reported concerning the efficacy of this system for polymer and rubber analysis. Nevertheless, it appears that oligomers and other reaction residues, softeners, antioxidants (e.g. BHT) and several other additives used to modify polymers are easily extracted from PVC, PP, PE, PS, rubber and many other polymeric materials. Also, some leading international plastic, rubber and packaging companies have made Soxtec an integral part of their quality control routines. Some application examples where Soxtec has proved successful are [148] ... [Pg.72]

Howard [772] has been amongst the first to show the usefulness of conventional SEC for polymer/additive systems. Coupek el al. [773] have also reported results with this technique in an early stage their work was limited to synthetic mixtures of additives. The use of open-column SEC in the analysis of plastics additives has been reported [774], Qualitative analysis of additives has been performed by stopped-flow SEC with IR detection [775]. Polypropylene oligomers were isolated from a PP/(Irganox 1010, Irgafos 168, DBS) matrix by dissolution (toluene)/precipitation (methanol) and Soxhlet... [Pg.262]


See other pages where Plastic oligomer is mentioned: [Pg.94]    [Pg.390]    [Pg.416]    [Pg.3728]    [Pg.103]    [Pg.219]    [Pg.12]    [Pg.94]    [Pg.390]    [Pg.416]    [Pg.3728]    [Pg.103]    [Pg.219]    [Pg.12]    [Pg.123]    [Pg.230]    [Pg.234]    [Pg.240]    [Pg.478]    [Pg.119]    [Pg.337]    [Pg.356]    [Pg.435]    [Pg.263]    [Pg.820]    [Pg.1034]    [Pg.248]    [Pg.402]    [Pg.337]    [Pg.33]    [Pg.34]    [Pg.233]    [Pg.865]    [Pg.128]    [Pg.208]    [Pg.587]    [Pg.364]    [Pg.3]    [Pg.18]    [Pg.112]    [Pg.113]    [Pg.140]    [Pg.151]    [Pg.216]    [Pg.267]    [Pg.373]    [Pg.411]   
See also in sourсe #XX -- [ Pg.416 ]




SEARCH



Ethylene oligomers plastic range

Plasticizers flexible oligomer

© 2024 chempedia.info