Plastic foams water-based adhesives

Plastic foams. Some solvent cements and solvent-containing pressure-sensitive adhesives will collapse thermoplastic foams. Water-based adhesives, based on styrene butadiene rubber (SBR) or polyvinyl acetate, and 100 percent solid adhesives are often used. Butyl, nitrile, and polyurethane adhesives are often used for flexible polyurethane foam. Epoxy adhesives offer excellent properties on rigid polyurethane foam. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Thermoplastic adhesives are generally available as solvent solutions, water-based emulsions, and hot melts. The first two systems are useful in bonding porous materials such as wood, plastic foam, and paper. Water-based systems are especially useful for bonding foams that could be affected adversely by solvents. When hardened, thermoplastic adhesives are very nonresistant to the solvent in which they are originally supplied. 

A wide variety of general purpose cleansers is available with abrasive materials to facilitate the cleansing process. Conventional cleansers are petroleum-based and use pumice, sand, metal meshes, foams, rigid and textured plastics, and various composites as abrasive materials. Although these materials are effective, they are often too harsh for use in sensitive or soft areas. Further, many of the abrasives and their associated adhesives are not biodegradable so they remain in the plumbing and in the water system long after their use (2). 

---