Pigments silicones

Table 5. One-Part Pigmented Siliconized Acrylic Latex Sealant ...

Baudoin etal. [168,169] first presented qualitative depth profiles of lacquer and polymer coatings by means of r.f. GD-OES. Quantitative depth profiles were successively obtained by Payling et al. [170] on prepainted metal coated steel. Samples comprised a (rutile) pigmented silicone-modified polyester topcoat over a polymer primer, on top of an aluminium-zinc-silicon alloy coated steel substrate. With GD-OES in r.f. mode, it was possible to determine the depth profile through the polymer topcoat, polymer primer coat, metal alloy coating, and alloy layer binding to the steel substrate with a total depth of 50 im, all in about 60 min on the one sample. GD-OES depth profiles of unexposed and weathered silicone-modified polyesters were also reported [171]. Radiofrequency GD-OES has further been used to... 

One-part clear acrylic latex sealant formulation, 22 42t One-part manganese dioxide-cured polysulfide formulation, 22 4 It One-part pigmented siliconized acrylic latex sealant, 22 42t One-part RTV silicones, 22 596 One-part silicone cross-linkers, 22 33t One-part silicone sealant formulation, 22 34t... 

Silicon monoxide, SiO. Formed Si02 plus C in electric furnace. The impure brown powder is used as a pigment and abrasive (Monex). Stable in vapour phase (Si plus Si02). 

Silicone Heat-Cured Rubber. Sihcone elastomers are made by vulcanising high molecular weight (>5 x 10 mol wt) linear polydimethylsiloxane polymer, often called gum. Fillers are used in these formulations to increase strength through reinforcement. Extending fillers and various additives, eg, antioxidants, adhesion promoters, and pigments, can be used to obtain certain properties (59,357,364). 

Some elements come in and out of fashion, so to speak. Sixty years ago, elemental silicon was a chemical curiosity. Today, ultrapure silicon has become the basis for the multibillion-dollar semiconductor industry. Lead, on the other hand, is an element moving in the other direction. A generation ago it was widely used to make paint pigments, plumbing connections, and gasoline additives. Today, because of the toxicity of lead compounds, all of these applications have been banned in the United States. 

Oxides Metal ion(s) + oxygen ion Haematite (composed of iron oxide), a red pigment and an iron ore Corundum (composed of aluminum oxide), an abrasive silica (composed of silicon dioxide), common sand... 

Iron oxide is used for compounding silicone rubbers where it is used to improve heat stability. Iron oxide, mainly ferric oxide, also finds application as a pigment. 

There are two groups of triarylcarbonium pigments inner salts of triphenyl-methane sulfonic acids, and complex salts with heteropolyacids containing phosphorus, tungsten, molybdenum, silicon, or iron. 

Sponge Aluminum anodes Ti02 pigments Carbon raiser Silicon carbide Foundries Coke ovens... 

On the other hand, the alkoxide system presented several problems in formulation. The system first chosen as a model consisted of a trimethoxymethyl silane crosslinker, 8000 centistoke HEB siloxane, and a catalyst. A number of catalysts were used and each exhibited different cure rates and electrical properties. DuPont tetraalkoxytitante-Tyzor appears to he one of the better catalysts used in this type of curing system. Fillers are usually incorporated into the silicone formulation to improve mechanical properties, promote adhesion, and to serve as light screening and pigment agents. Cab-o-sil, a form of fumed silica, carbon-black, titanium dioxide and calcium carbonate are then used as RTV fillers. 

---