Phosphines carbon monoxide reactions

Patents on the catbonylation of methyl chlotide [74-87-3] using carbon monoxide [630-08-0] in the presence of rhodium, palladium, and tidium complexes, iodo compounds, and phosphonium iodides or phosphine oxides have been obtained (26). In one example the reaction was conducted for 35... 

The reaction of methyl propionate and formaldehyde in the gas phase proceeds with reasonable selectivity to MMA and MAA (ca 90%), but with conversions of only 30%. A variety of catalysts such as V—Sb on siUca-alumina (109), P—Zr, Al, boron oxide (110), and supported Fe—P (111) have been used. Methjial (dimethoxymethane) or methanol itself may be used in place of formaldehyde and often result in improved yields. Methyl propionate may be prepared in excellent yield by the reaction of ethylene and carbon monoxide in methanol over a mthenium acetylacetonate catalyst or by utilizing a palladium—phosphine ligand catalyst (112,113). 

A Belgian patent (178) claims improved ethanol selectivity of over 62%, starting with methanol and synthesis gas and using a cobalt catalyst with a hahde promoter and a tertiary phosphine. At 195°C, and initial carbon monoxide pressure of 7.1 MPa (70 atm) and hydrogen pressure of 7.1 MPa, methanol conversions of 30% were indicated, but the selectivity for acetic acid and methyl acetate, usehil by-products from this reaction, was only 7%. Ruthenium and osmium catalysts (179,180) have also been employed for this reaction. The addition of a bicycHc trialkyl phosphine is claimed to increase methanol conversion from 24% to 89% (181). 

Transition-metal organometallic catalysts in solution are more effective for hydrogenation than are metals such as platinum. They are used for reactions of carbon monoxide with olefins (hydroformyla-tion) and for some ohgomerizations. They are sometimes immobihzed on polymer supports with phosphine groups. 

Examples are given of common operations such as absorption of ammonia to make fertihzers and of carbon dioxide to make soda ash. Also of recoveiy of phosphine from offgases of phosphorous plants recoveiy of HE oxidation, halogenation, and hydrogenation of various organics hydration of olefins to alcohols oxo reaction for higher aldehydes and alcohols ozonolysis of oleic acid absorption of carbon monoxide to make sodium formate alkylation of acetic acid with isobutylene to make teti-h ty acetate, absorption of olefins to make various products HCl and HBr plus higher alcohols to make alkyl hahdes and so on. 

Sodium pyrazolate and 3,5-dimethylpyrazolate, [( " -cod)Rh(/A-Cl)]2, carbon monoxide, 3-(diphenylphosphino)benzoic acid, or (2-formylphenyl)diphenyl-phosphine give rise to complexes 120 (R = H, Me) and 121 (R = H, Me) [94JOM(469)213]. However, 2-(diphenylphosphino)benzoic acid (the carboxyl group in the ortho position) leads to formation of the mononuclear complexes 122. The products appear to be catalysts for hydroformylation reactions [93MI2]. 

Soderberg and coworkers have developed a palladium-phosphine-catalyzed reductive iV-het-eroannuladon of 2-nitrostyrenes forming indoles in good yields For example, reaction of 6-bromo-2-nitrostyrene with carbon monoxide in the presence of a catalytic amount of palladium diacetate (6 mol% and triphenylphosphine 124 mol% in acetonitrile at 30 gives 4-bromoindole in 86% yield fEq 10 62 Several functional groups, such as esters, ethers, bromides, tnflates, and additional nitro groups, have been shown to be compatible with the reaction conditions... 

The experimental evidence for the availability of the coordinative insufficiency of the transition metal ion in the propagation centers was obtained (175) in the study of the deactivation of the propagation centers by coordination inhibitors. On the introduction of such inhibitors as phosphine and carbon monoxide into the polymerization medium, the reaction stops, but the metal-polymer bond is retained. It shows that in this case the interaction of the inhibitor with the propagation center follows the scheme ... 

Abstract This chapter focuses on carbon monoxide as a reagent in M-NHC catalysed reactions. The most important and popular of these reactions is hydro-formylation. Unfortunately, uncertainty exists as to the identity of the active catalyst and whether the NHC is bound to the catalyst in a number of the reported reactions. Mixed bidentate NHC complexes and cobalt-based complexes provide for better stability of the catalyst. Catalysts used for hydroaminomethylation and carbonyla-tion reactions show promise to rival traditional phosphine-based catalysts. Reports of decarbonylation are scarce, but the potential strength of the M-NHC bond is conducive to the harsh conditions required. This report will highlight, where appropriate, the potential benefits of exchanging traditional phosphorous ligands with iV-heterocyclic carbenes as well as cases where the role of the NHC might need re-evaluation. A review by the author on this topic has recently appeared [1]. 

The reaction of CDI with primary phosphines was expected to lead first to an azolide ImCOPHR, analogous to imidazole-N-carboxamide as the reaction product of primary amines and CDI. In fact, reaction of phenylphosphine with CDI leads directly to imidazole, carbonmonoxide, and tetraphenylcyclotetraphosphine (THF, reflux, 5h). In analogy to the dissociation of imidazole-AT-carboxamide into isocyanates and imidazole, this can be explained by the assumption that the first-formed ImCOPHC6H5 dissociates into an isocyanate analogue, C6H5P=C=0, which is unstable and decomposes into carbon monoxide and phenylphosphene (C6H5P) which tetramerizes. However, the intermediate formation of phenylphosphene has not yet been definitely proved. 

While the replacement of carbon monoxide by a tertiary phosphine ligand represents one of the most fundamental substitution reactions in metal carbonyl chemistry, it was not until 1975, some 16 years after the... 

A major advance in homogeneous catalysis was the introduction of a trialkyl-phosphine to supplement the role of carbon monoxide in catalyst stabilization. [3] A ligand modifier such as trialkylphosphine serves three principal roles in a homogeneous catalytic process. It stabilizes the metal, it influences the reaction rate, and it influences process selectivity. 

The substitution of trialkylphosphine for carbon monoxide also makes the metal-hydrogen bond more hydridic in character and results in increased reduction of the initially formed aldehyde to alcohol. Slaugh and Mullineaux (52) compared Co2(CO)g and [Co2(CO)8 + 2PBu3], each at reaction conditions of 150°C, 500 psi, H2/CO I.0, for the hydroformylation of 1-pentene. The products consisted of hexyl aldehydes and hexyl alcohols in the ratios of 95 5 and 30 70, respectively. In a negative aspect of the reaction, they observed 23% hydrogenation of alkene to alkane at a reaction temperature of 195°C with the phosphine-modified catalyst. Tucci (54) reported less alkane formation (4-5%) under more favorable reaction conditions (I60°C, H2/CO 1.2, 1 hour reaction time). 

In an early investigation (28, 59, 60), critical combinations of several reaction parameters were discovered to produce unusually high yields of the linear isomer. The parameters included low partial pressure of carbon monoxide, high concentration of phosphite or aryl phosphine ligands, and low total gas pressure. The catalyst was a soluble complex of rhodium, formed in situ from rhodium metal in many cases. Isomer ratios of 10 1 to 30 1 were obtained by appropriate selection of these reaction parameters. Losses to alkane were minimal, even with Pm as low as 10 psi. Tables XI-XIV illustrate the effects of these various reaction parameters on the product composition. 

---