Personal protective equipment hazard assessment

Appendix O Personal Protective Equipment Hazard Assessment Form (Sample)... 

Exposure. With the establishment of cumulative risk assessment requirements of the FQPA, there is much more of a need to focus on exposure. Prior to FQPA registrants could often live with the worst case result of an individual exposure assessment. Hazards could be mitigated with additional testing and/or label recommendations for additional personal protective equipment. Cumulative assessment and a certain total allowable risk shows that worst-case exposure analyses soon cause the risk cup to overflow. Prudent long-term strategy for a... 

E.3.2 Job Hazard Analysis for Personal Protective Equipment (PPE) Assessment... 

PPE is the last section to complete after all of the hazards of each task are defined and after alternative controls have been implemented. Refer to Chapter 7, Appendix E for Personal Protective Equipment (PPE) Assessment forms, etc. that be used to identify all related PPE. 

When an explosive device is used to disperse radioactive, chemical, or biological materials, the treatment of casualties is more difficult because of the presence of contamination. In this situation, emergency responders could face a life-threatening situation unless appropriate precautions are taken. These precautions include using screening instruments (see Section 6.12) to assess hazard conditions before responding, then selecting the appropriate level of personal protective equipment (see Section 6.7) to provide protection from the hazard. 

All methods should be carried out only by competent persons and with adequate supervision when necessary. All obligations under The Control of Substances Hazardous to Health Regulations 1999 (COSHH), should be observed, and risk-assessment documentation completed. Appropriate personal protective equipment should be provided and worn whenever recommended. Persons carrying out the procedures in this manual do so entirely at their own risk, and neither the author, publishers, or anyone mentioned in, or connected with this publication can be held in any way responsible for any accidents no matter how caused. 

Responds to the release of hazardous substances in a defensive manner without actually trying to stop the release. Requires Level 1 competency and 8 hours of additional training in basic hazard and risk assessment, personal protective equipment selection, containment and control procedures, decontamination, and standard operating procedures. 

Hazard and risk assessment, personal protective equipment, handling of releases, decontamination, operating and termination procedures leader s training guide included. 

Hazards will be assessed by a five-tiered scale which ranges from 0 to 4. A "0" hazard denotes a minimal hazard, while a 4" hazard indicates a severe hazard. In addition, the system tells the employee the proper personal protective equipment to be worn while using a material under specific conditions. The degree of hazard for each of the three types of hazard is explained in table 1. 

According to Occupational Safety and Health Administration, OSHA, Personal Protective Equipment Standard, selection of protective clothing follows a hazard assessment, which determines a need for required protections. 

Where a particular hazard exists in the working environment, an employer must can7 out a risk assessment and establish procedures which will reduce or eliminate the risk. When the risk cannot be completely removed, an employer must provide personal protective equipment (PPE) to protect his or her employees from a risk to health and safety. 

Know how to implement the employer s emergency response plan Possess the ability to function in an assigned role in the incident command system Know how to select and use proper specialized chemical personal protective equipment Understand hazard and risk assessment techniques Perform advance control, containment, and/or confinement operations Understand and implement decontamination Understand termination procedures... 

The key to safety is to recognize the hazard (e.g., corrosive properties), assess the risk of exposure (how you might be exposed), minimize the hazard (use personal protective equipment and safety equipment), and prepare for emergencies (spills, splashes). 

Hazard Assessment and Selection of Personal Protective Equipment I. Overhead Hazards... 

General strategy for control (Control of Substances Hazardous to Health Regulations). Identification of a hazard. Assessment of risk. Choice of control measures (including process change, substitution, segregation, engineering controls, reduced time exposure, personal protective equipment). 

---