Permeability apparent

Any of the components of the barrier may be rate determining, and in some cases, several of them are important for the diffusion process (Fig. 2, Scheme 2d combined control). In any case, it is most straightforward to look at the overall permeability of the entire barrier. The overall permeability (apparent... 

Equations (9.42) and (9.46) reveal that the range of a values in the Mark-Houwink equation is traceable to differences in the permeability of the coil to the flow streamlines. It is apparent that the extremes of the nondraining and free-draining polymer molecule bracket the range of intermediate permeabilities for the coil. In the next section we examine how these ideas can be refined still further. 

A microscopic description characterizes the structure of the pores. The objective of a pore-structure analysis is to provide a description that relates to the macroscopic or bulk flow properties. The major bulk properties that need to be correlated with pore description or characterization are the four basic parameters porosity, permeability, tortuosity and connectivity. In studying different samples of the same medium, it becomes apparent that the number of pore sizes, shapes, orientations and interconnections are enormous. Due to this complexity, pore-structure description is most often a statistical distribution of apparent pore sizes. This distribution is apparent because to convert measurements to pore sizes one must resort to models that provide average or model pore sizes. A common approach to defining a characteristic pore size distribution is to model the porous medium as a bundle of straight cylindrical or rectangular capillaries (refer to Figure 2). The diameters of the model capillaries are defined on the basis of a convenient distribution function. 

Specific gravity, apparent The ratio of the weight in air of a given volume of the impregnable portion of a permeable material (that is the solid matter including its permeable pores or voids) to the weight in air of an equal volume of distilled water at a stated temperature. 

Bacillus thuringiensis produces a variety of organic compounds which are toxic to the larvae of certain susceptible insect hosts. Among the toxic entities are proteinaceous crystals, probably three soluble toxins, and certain enzymes. The protein material is the major toxin active in killing lepidopterous larvae. The protein is formed by the cells apparently in close synchrony with sporulation, and its nature is a constant function of bacterial strain. The mode of action of the protein is under study. The sequence of events in the pathology observed is probably solubilization of the crystal (enzymatic or physical)—>liberation of toxic unit—>alteration of permeability of larval gut wall— change in hemolymph pH—>invasion of hemolymph by spores or vegetative cells of the bacterium. 

Water Permeation and Solute Separation through the Membrane. The measurements of water permeability of the 67 membranes prepared under different conditions were carried out by using an Amicon Diaflo Cell (effective membrane area, 13.9 cm2) under a pressure of 3 kg/cm2 at 25 °C. Some results are listed in Table 1067. It is apparent that much higher water absorption and permeability than the cellulosic membrane are characteristic of the 67 membranes prepared by both the casting polymerization and conventional casting. 

The permeability tests for alkali metal ions in the aqueous solution were also conducted. When an aqueous salt solution moves to cell 2 through the membrane from cell 1, the apparent diffusion coefficient of the salt D can be deduced from a relationship among the cell volumes Vj and V2, the solution concentration cx and c2, the thickness of membrane, and time t6 . In Table 12, permeabilities of potassium chloride and sodium chloride through the 67 membrane prepared by the casting polymerization technique from the monomer solution in THF or DMSO are compared with each other and with that the permeability through Visking dialyzer tubing. The... 

In the early time, the excellent gas permeability seemed to make them promising to be contact lenses. However, the poor hydrophilicity of silicone elastomers diminished their apparent utility. 

Artursson P and Karlsson J. Correlation between oral drug absorption in humans and apparent drug permeability coefficients in human intestinal epithelial (Caco-2) cells. Biochem Biophys Res Commun 1991 175 880-5. 

Another relatively new lipophilicity scale proposed for use in ADME studies is based on MEKC [106]. A further variant is called BMC and uses mobile phases of Brij35 [polyoxyethylene(23)lauryl ether] [129]. Similarly, the retention factors of 16 P-blockers obtained with micellar chromatography with sodium dodecyl sulfate as micelle-forming agent correlates well with permeability coefficients in Caco-2 monolayers and apparent permeability coefficients in rat intestinal segments [130]. 

The evaluation of the apparent ionization constants (i) can indicate in partition experiments the extent to which a charged form of the drug partitions into the octanol or liposome bilayer domains, (ii) can indicate in solubility measurements, the presence of aggregates in saturated solutions and whether the aggregates are ionized or neutral and the extent to which salts of dmgs form, and (iii) can indicate in permeability measurements, whether the aqueous boundary layer adjacent to the membrane barrier, Umits the transport of drugs across artificial phospholipid membranes [parallel artificial membrane permeation assay (PAMPA)] or across monolayers of cultured cells [Caco-2, Madin-Darby canine kidney (MDCK), etc.]. 

Hydroxyethylcellulose with a degree of substitution of 1.1 to 1.6 has been described for fluid loss control in water-based drilling fluids [1473]. An apparent viscosity in water of at least 15 cP should be adjusted to achieve an API fluid loss of less than 50 ml/30 min. Crosslinked hydroxyethylcellulose is suitable for high-permeability formations [344,346]. 

Key mechanisms important for improved oil mobilization by microbial formulations have been identified, including wettability alteration, emulsification, oil solubilization, alteration in interfacial forces, lowering of mobility ratio, and permeability modification. Aggregation of the bacteria at the oil-water-rock interface may produce localized high concentrations of metabolic chemical products that result in oil mobilization. A decrease in relative permeability to water and an increase in relative permeability to oil was usually observed in microbial-flooded cores, causing an apparent curve shift toward a more water-wet condition. Cores preflushed with sodium bicarbonate showed increased oil-recovery efficiency [355]. 

Reliable determination of all three functions depends on the information content associated with the experiments. The conventional experimental design does not provide sufficient information to determine all three functions accurately [34], Another consideration is that conventional analyses are all based on the assumption that the sample is uniform, and use an average value for porosity and an apparent value for permeability. Clearly, these properties vary spatially, and failure to account for the effects of spatial variations in the properties will lead to errors in the estimates of the functions [16]. 

---