Pendent functionalization polymers

The copolymerization of furan and 2-methylfuran with dienophiles such as maleic anhydride leads to polymer structures with furan pendent functionality. Furan, 2-methylfuran, and 2,5-dimethylfuran have been copolymerized with acrylic monomers (51,52) and acrylonitrile (52,53). The furan ring of furan, 2-methylfuran, and 2,5-dimethylfuran participates as a diene in a free radical copolymerization with acrylonitrile. The initial step for furan and for 2,5-dimethylfuran is the attachment of an acrylonitrile radical at the 2-position, but for 2-methylfuran, the attack is at the-5-position. Propagation proceeds by the attack of the furan radical on an acrylonitrile molecule, to leave one olefinic bond in the structure derived from the furan ring. If this bond is in the 4,5- or 2,3-position, it may be involved in a second additional reaction by the return of the propagating chain. 

Second, the modification of the pendent functionality of CABEs through reactions with amines or amino acids was developed, which can proceed concurrently or after the polycondensation of various CABE polymers, such as BPLP [2,20,21], iCMBA [22,23], and cross-linked meth-... 

Graft copolymer formation may occur by a degradative process through reaction between a pendent functionality on one polymer and main-chain linkages (m the second polymer. Small amounts of cross-linked copolymer may be formed if degradable segments of the graft copolymer read further... 

The cross-linking reactions have been performed by at least five processes. In Reaction Type 4a, direct cross-linking occurs by covalent bond formation between functionalities on each of the two immiscible polymers without degradation of either polymer. The cross-linking is most often performed by reaction of pendent, nucleophilic sites of one multifunctional polymer with pendent, electrophilic sites of the second multifunctional polymer. Common examples include reactions of pendent acid or amine nucleophiles on one functionalized polymer with pendent electrophihc groups such as epoxide, oxazoline, or ortho ester on a second functionalized polymer. 

Recent Studies on Pendent Functionalization of Aliphatic Polyesters as Degradable Synthetic Polymers for Biology... 

Avram E, Lacatus C, Mocanu G (2001) Polymers with pendent functional groups VII. Polysaccharide derivatives containing viologen groups. Eur Polym J 37 1901-1906... 

Acid-C t lyzed Chemistry. Acid-catalyzed reactions form the basis for essentially all chemically amplified resist systems for microlithography appHcations (61). These reactions can be generally classified as either cross-linking (photopolymerization) or deprotection reactions. The latter are used to unmask acidic functionality such as phenohc or pendent carboxyhc acid groups, and thus lend themselves to positive tone resist apphcations. Acid-catalyzed polymer cross-linking and photopolymerization reactions, on the other hand, find appHcation in negative tone resist systems. Representative examples of each type of chemistry are Hsted below. 

A substantial number of bioactive molecules, such as polypeptides, N-acetyl-DL-penicillamine, p-(dipropylsulfamoyl)benzoic acid, and nicotinic acid, contain a carboxylic acid function, and this provides a site for linkage to a polyphosphazene chain. A number of prototype polymers have been synthesized in which pendent amino groups provide coupling sites for the carboxylic acid (34). The amide linkages so formed are potentially bioerodible, but the use of a hydrolytic sensitizing cosubstituent would be expected to accelerate the process. 

The most interesting aminomethyl derivative of condensation polymers that we have prepared to date Is derived from direct reduction of poly(2-cyano-l,3-phenylene arylene ether), 20. Enchainment of benzonitrile repeat units Is accomplished by coupling 2,6-dichlorobenzonitrile with the potassium salt of bisphenol-A copolymers with lower nitrile contents can be produced by copolycondensation of bisphenol-A, 2,6-dichlorobenzonitrile and 4,4 -dichlorodiphenyl sulfone.21 The pendent nitrile function provides an active site for further elaboration. 

I. pendent amine functions attached to the main polymer chain... 

Whereas the tensile strength was not a sensitive function of the monomer structure, the tensile modulus (Young s Modulus) was clearly related to the monomer structure. This is expected since the tensile modulus is a measure of the polymer s resistance to deformation and is related to the "stiffness" of a polymeric material. The highest tensile modulus (22,000 kg/cm2,2.2 GPa) was measured for poly(BPA iminocarbonate). Replacement of BPA by Dat-Tyr-Hex reduced the tensile modulus significantly. This observation can possibly be attributed to the presence of the long hexyl ester pendent chain in Dat-Tyr-Hex. Generally, the polyiminocarbonates were somewhat "stiffer" than the corresponding polycarbonates. Thus, the tensile moduli of poly(Dat-Tyr-Hex iminocarbonate) and poly(Dat-Tyr-Hex carbonate) were 16,300 kg/cm2 (1.6 GPa) and 13,900 kg/cm2 (1.3 GPa) respectively. 

---