Chemical peeling

Chemical blepharoplasty is treatment of the eyelids with a localized deep peel. Chemical cheUoplasty is treatment of the lips with a localized deep peel (see Chapter 36). 

Liu, Y Shi, J Langrish, T. A. G. Water-based extraction of pectin from flavedo and albedo of orange peels. Chemical Engineering Journal, v. 120, p. 203-209, 2006. 

Bergamot. Bergamot oil is produced by cold expression from peels of fmits from the small citms tree. Citrus bergamia. The fmits are inedible and of httle value. Bergamot is grown mainly in southern Italy and northern and western Africa. The oil is used to impart a sweet freshness to perfumes. Its largest chemical constituent, to the extent of 35—40%, is linalyl acetate [115-95-7] (1), with a much smaller amount of citral [5392-40-5] (2) as an important odor contributor. 

The study of acid-base interaction is an important branch of interfacial science. These interactions are widely exploited in several practical applications such as adhesion and adsorption processes. Most of the current studies in this area are based on calorimetric studies or wetting measurements or peel test measurements. While these studies have been instrumental in the understanding of these interfacial interactions, to a certain extent the interpretation of the results of these studies has been largely empirical. The recent advances in the theory and experiments of contact mechanics could be potentially employed to better understand and measure the molecular level acid-base interactions. One of the following two experimental procedures could be utilized (1) Polymers with different levels of acidic and basic chemical constitution can be coated on to elastomeric caps, as described in Section 4.2.1, and the adhesion between these layers can be measured using the JKR technique and Eqs. 11 or 30 as appropriate. For example, poly(p-amino styrene) and poly(p-hydroxy carbonyl styrene) can be coated on to PDMS-ox, and be used as acidic and basic surfaces, respectively, to study the acid-base interactions. (2) Another approach is to graft acidic or basic macromers onto a weakly crosslinked polyisoprene or polybutadiene elastomeric networks, and use these elastomeric networks in the JKR studies as described in Section 4.2.1. 

Other polymers used in the PSA industry include synthetic polyisoprenes and polybutadienes, styrene-butadiene rubbers, butadiene-acrylonitrile rubbers, polychloroprenes, and some polyisobutylenes. With the exception of pure polyisobutylenes, these polymer backbones retain some unsaturation, which makes them susceptible to oxidation and UV degradation. The rubbers require compounding with tackifiers and, if desired, plasticizers or oils to make them tacky. To improve performance and to make them more processible, diene-based polymers are typically compounded with additional stabilizers, chemical crosslinkers, and solvents for coating. Emulsion polymerized styrene butadiene rubbers (SBRs) are a common basis for PSA formulation [121]. The tackified SBR PSAs show improved cohesive strength as the Mooney viscosity and percent bound styrene in the rubber increases. The peel performance typically is best with 24—40% bound styrene in the rubber. To increase adhesion to polar surfaces, carboxylated SBRs have been used for PSA formulation. Blends of SBR and natural rubber are commonly used to improve long-term stability of the adhesives. 

The chemical nature of the tackifier also affects the compatibility of resin-elastomer blends. For polychloroprene (a polar elastomer) higher tack is obtained with a polar resin (PF blend in Fig. 27) than with a non-polar resin (PA blend in Fig. 27). Further, the adhesion of resin-elastomer blends also decreases by increasing the aromatic content of the resin [29]. Fig. 28 shows a decrease in T-peel strength of styrene-butadiene rubber/polychloroprene-hydrocarbon resin blends by increasing the MMAP cloud point. Because the higher the MMAP... 

In this theory, the adhesion is due to electrostatic forces arising from the transfer of electrons from one material of an adhesive joint to another. Evidence in support of this theory includes the observation that the parts of a broken adhesive joint are sometimes charged [48]. It has been shown that peeling forces are often much greater than can be accounted for by van der Waals forces or chemical bonds. 

Salicylic acid is a beta hydroxy acid. Glycolic acid is an alpha hydroxy acid, as are lactic acid, citric acid, and many others. Hydroxy acids are compounds that are both alcohols and acids at the same time. Hydroxy acids are used as chemical peeling agents. Alpha hydroxy acids can make the skin more sensitive to ultraviolet light by removing the skin s protective outer layers. Some alpha hydroxy acids ... 

---