P-Benzoquinone reactions

N2O2 groups. It is tempting to speculate and incorporate these reactions into our BNO scheme. For the p-benzoquinone reaction the first step involves BNO formation ... 

The Diels-Alder Reaction consists in the direct combination of a compound containing a conjugated diene system u ith a reagent which possesses a double or triple bond activated bj suitable adjacent groups. Examples of such reagents are maleic anhydride, p-benzoquinone, acraldehyde and acetylene dicarboxylic esters. Combination always occurs at the 1,4 positions of the diene system ... 

The reaction of o-diphenylcyclobutadiene (generated in situ by oxidation of its iron tricarbonyl complex) with p-benzoquinone yields A as the exclusive product. With tetracyanoethylene, however, B and C are formed in a 1 7 ratio. Discuss these results, and explain how they relate to the question of the square versus rectangular shape of cyclobutadiene. 

Arylation of enamines with p-benzoquinones takes a somewhat different course (70). The enamine (16) reacts exothermally with p-benzoquinone in benzene solution to give 2-(dimethylamino)-2,3-dihydro-3,3-dimethyl-5-benzofuranol (92). The reaction of enamines with quinone dibenzenesul-fonimide proceeds similarly (68). The product from the enamine (28) is the tetrahydrocarbazole derivative (93). 

Reactions of quinones with enamino ketones have not been reported, but ethyl (S-anilinocrotonate (94), an enamino ester, has been shown to condense (71) with p-benzoquinone to give l-phenyl-2-methyl-3-carbethoxy-5-hydroxyindole (95). 

Dimethylquinoxaline undergoes reaction with typical dienophiles such as maleic anhydride, p-benzoquinone, and AT-phenylmaleimide. The products were formulated as Diels-Alder adducts primarily since analogous products were not isolated from reactions with other quin-... 

The reaction investigated by Diels and Alder in 1928 was not new, examples had been known for several years [6]. Early work on the dimerization of tetra-chloropentadienone was conducted by Zincke in 1893 and 1897. In 1906, Albrecht described the product of addition of p-benzoquinone to one or two molecules of cyclopentadiene. Albrecht assigned erroneous formulas to these addition products, but they were later shown to be typical products of the diene synthesis by Diels and Alder. Ruler and Josephson reported the addition products formed by iso-prene and 1,4-benzoquinone in 1920. This research laid the ground work for Diels and Alder. 

The following preparation is given in U.S. Patent 3,356,573. 17a-Acetoxy-3(3-hydroxy-6-methylpregn-5-en-20-one (1 g), aluminum tert-butoxide (1 g) and p-benzoquinone (6 g) were dissolved in dry benzene (100 ml) and the mixture was heated under reflux for 30 minutes. The reaction mixture was cooled and washed with potassium hydroxide solution until the benzene layer was colorless. The benzene was washed with water, dried and evaporated to dryness under reduced pressure. The residue crystallized from aqueous methanol to give 17a-acetoxy-6-methylpregna-4,6-diene-3,20-dione, needles, MP 214° to 216°C. 

A. Mercury(II) chloranilate method Discussion. The mercury(II) salt of chloranilic acid (2,5-dichloro-3,6-dihydroxy-p-benzoquinone) may be used for the determination of small amounts of chloride ion. The reaction is ... 

A proof for the formation of alkyl radicals was found by their addition to the aci-nitromethane anion (CH2=N02 ) and by their reaction with p-benzoquinone to give the optically active nitroalkane radical-anion and the semiquinone radicals, respectively. In the case of di-r-butyl sulfoxide the f-butyl radical was observed directly by its absorption spectra. 

A 500-ml, three-necked, round-bottomed flask fitted with a sealed mechanical stirrer and an outlet leading to a gas bubbler, is charged with a solution containing 4.0 g (0.0208 mole) of cyclobutadieneiron tricarbonyl2 [tricarbonyl( 4-l,3-eyclobutadiene)iron] and 2.0 g. (0.0185 mole) of freshly sublimed p-benzoquinone (2,4-cyclohexadiene-l,4-dione) (Note 1) in 72 ml. of acetone and 8 ml. of water. To the vigorously stirred, ice-cold solution, approximately 40-42 g of ceric ammonium nitrate [ammonium hexanitrocerate(IV)] (Note 2) is added portion-wise over a period of 10-12 minutes (Note 3), until the carbon monoxide evolution has ceased. The reaction mixture is then poured into 600 ml. 

Scheme 2.7). The phenols were formed during isolation (chromatography on silica gel) from the corresponding cycloadducts. In the reaction with p-benzoquinone, a product was unexpectedly obtained from a hetero-T>ie s-Alder reaction with the quinone acting as a carbonyl dienophile. 

Tetraene 141 has been converted into various complex polycondensed adducts by reacting with a variety of dienophiles such as maleic anhydride, N-phenylmaleimide, N-phenyltriazolinedione,p-benzoquinone and tetracyano-ethylene carried out under thermal conditions. All cycloadditions occurred facial-diastereoselectively from an outside attack and provided monocycloadducts which had an exceptionally close relationship between diene and dieno-phile and then underwent intramolecular cycloaddition [125]. The reaction between 141 and p-benzoquinone is illustrated in Scheme 2.53. 

An interesting example of accelerating a reaction when high pressure is applied is the synthesis of a series of highly functionalized 4a,5,8,8a-tetrahy-dro-l,4-naphthalenediones 10 by cycloaddition of p-benzoquinone (8) with a variety of electron-poor dienic esters 9 at room temperature (Equation 5.2) reported by Dauben and Baker [6]. Using conventional methods, these heat-sensitive cycloadducts are difficult to synthesize free of the isomeric hydroquin-ones. When the reactions were carried out under thermal conditions, the primary cycloadducts were mostly converted into the corresponding hydroqui-nones. 

Until now examples for catalytic reactions involving ferrates with iron in the oxidation state of -l-3 are very rare. One example is the hexacyanoferrate 8-catalyzed oxidation of trimethoxybenzenes 7 to dimethoxy-p-benzoquinones 9/10 by means of hydrogen peroxide which was published by Matsumoto and Kobayashi in 1985 [2]. Using hexacyanoferrate 8 product 9 was favored while other catalysts like Fe(acac)3 or Fe2(S04)3 favored product 10 (Scheme 2). The oxidation is supposed to proceed via the corresponding phenols which are formed by the attack of OH radicals generated in the Fe/H202 system. 

Pentacyanocobaltate ion reduces p-benzoquinone in several stages . An initial, fast reaction produces the bridged species... 

Yamamoto and co-workers reported abase- and ligand-free palladium (II) catalysed method, in methanol at room temperature and under air [49], While the conversion of arylboronic acids bearing an electro-donating group was very efficient, the presence of an electro-withdrawing substituent led to lower conversions. To solve this problem and also prevent the fast formation of palladium black, Yamamoto and co-workers described a new approach where the reaction was catalysed by NHC-bearing complexes 21 and 22 in the presence of an oxidant (Fig. 7.4) [50]. The best results were obtained when complex 21b was used in methanol at room temperature, in the presence of a small excess of p-benzoquinone. 

These reactions are found to be promoted by electron-donating substituents in the diene, and by electron-withdrawing substituents in the alkene, the dienophile. Reactions are normally poor with simple, unsubstituted alkenes thus butadiene (63) reacts with ethene only at 200° under pressure, and even then to the extent of but 18 %, compared with 100% yield with maleic anhydride (79) in benzene at 15°. Other common dienophiles include cyclohexadiene-l,4-dione (p-benzoquinone, 83), propenal (acrolein, 84), tetracyanoethene (85), benzyne (86, cf. p. 175), and also suitably substituted alkynes, e.g. diethyl butyne-l,4-dioate ( acetylenedicarboxylic ester , 87) ... 

The oxidative formation of p-benzoquinones from anilides such as 7-108 was used for the synthesis of the core scaffold of the natural products elisabethin A (7-106) and pseudopterosin A aglycone (7-107) (Scheme 7.30). Exposure of anilide 7-108 to DMP [53] led to the formation of the o-imidoquinone 7-109, which underwent an intramolecular Diels-Alder reaction to give 7-110 in 28% yield after hydration. In a competitive pathway, the p-quinone 7-111 is also formed from 7-108, which on heating in toluene again underwent an intramolecular Diels-Alder reaction to give cycloadduct 7-112 in 25% overall yield. Hydrolysis of 7-112 furnished the carbocyclic skeleton 7-113 of elisabethin A (7-106). 

Issa et al. [34] used 2,3-dichloro-5,6-dicyano-p-benzoquinone for the spectropho-tometric determination of primaquine and other antimalarials. The drugs were determined in tablets by a spectrophotometric method based on the reaction with 2.3-d ich loro-5.6-dicyano-p-benzoquinone and measurement of the absorbance at 460 nm. The reaction occurred fastest in methanol and acetonitrile to yield a radical anion, which was detected by electron spin resonance. The color attained its maximum intensity after 5 min and remained stable for at least 1 h. The absorbance versus concentration curve obeyed Beer s law in the concentration range 1-4 mg per 100 mL. The recovery was 99.9-102.6%. 

Most of the interest in mimicing aspects of photosynthesis has centered on a wide variety of model systems for electron transfer. Among the early studies were experiments involving photoinduced electron transfer in solution from chlorophyll a to p-benzoquinone (21, 22) which has been shown to occur via the excited triplet state of chlorophyll a. However, these solution studies are not very good models of the in vivo reaction center because the in vivo reaction occurs from the excited singlet state and the donor and acceptor are held at a fixed relationship to each other in the reaction-center protein. 

The following unusual cyclization took place by the reaction of p-benzoquinone coordinated by palladium with two moles of butadiene at 60°C to give the tricyclic compound, 128 (117). 

Enthalpies, Activation Energies, and Rate Constants of Reactions of p-Benzoquinone with Phenols and Amines InH + Q > In + HQ in Hydrocarbon Solutions Calculated by IPM Method for Equations See Chapter 6 and for the Values of a, bre, and A, See Table 18.9... 

Acceptors of alkyl radicals are known to be very weak inhibitors of liquid-phase hydrocarbon oxidation because they compete with dioxygen, which reacts very rapidly with alkyl radicals. The situation dramatically changes in polymers where an alkyl radical acceptor effectively terminates the chains [3,49], The study of the inhibiting action of p-benzoquinone [50], nitroxyl radicals [51-53], and nitro compounds [54] in oxidizing PP showed that these alkyl radical acceptors effectively retard the oxidation of the solid polymer at concentrations ( 10-3 mol L 1) at which they have no retarding effect on liquid hydrocarbon oxidation. It was proved from experiments on initiated PP oxidation at different p02 that these inhibitors terminate chains by the reaction with alkyl macroradicals. The general scheme of such inhibitors action on chain oxidation includes the following steps ... 

Nitroxyl radicals, p-benzoquinone, and dinitrotoluene terminate chains only by the reaction with alkyl macroradicals. They form the following series according to their activity nitroxyl radical > quinone > nitro compound. 

---