Oxidation alcohol from

Cupric oxide-zinc carbonate-chromium oxide Alcohols from carboxylic acid esters Continuous process s. 18, 103... 

An example of this t3T)e of reaction which does not produce a byproduct is the production of allyl alcohol from propylene oxide ... 

Ethyl a-naphthylacetate is prepared as follows. To a solution of 10 g. of the diazo ketone in 150 ml. of ethanol at 55-60°, add a small amount of aslurry of silver oxide, prepared from 10 ml. of 10 per cent, aqueous silver nitrate and stirred with 25 ml. of ethanol. As soon as the evolution of nitrogen subsides, introduce more of the silver oxide and continue the process until all the slurry has been added. Reflux the mixture for 15 minutes, add 2-3 g. of decolourising carbon, filter and evaporate the alcohol on a water bath. Distil the residue and collect the ethyl a-naph-thylacetate at 176-178°/ 1 mm. the yield is 9 g. 

Oxidative Carbonylation of Ethylene—Elimination of Alcohol from p-Alkoxypropionates. Spectacular progress in the 1970s led to the rapid development of organotransition-metal chemistry, particularly to catalyze olefin reactions (93,94). A number of patents have been issued (28,95—97) for the oxidative carbonylation of ethylene to provide acryUc acid and esters. The procedure is based on the palladium catalyzed carbonylation of ethylene in the Hquid phase at temperatures of 50—200°C. Esters are formed when alcohols are included. Anhydrous conditions are desirable to minimize the formation of by-products including acetaldehyde and carbon dioxide (see Acetaldehyde). 

The elimination of alcohol from P-alkoxypropionates can also be carried out by passing the alkyl P-alkoxypropionate at 200—400°C over metal phosphates, sihcates, metal oxide catalysts (99), or base-treated zeoHtes (98). In addition to the route via oxidative carbonylation of ethylene, alkyl P-alkoxypropionates can be prepared by reaction of dialkoxy methane and ketene (100). 

The product secondary alcohols from paraffin oxidation are converted to ethylene oxide adducts (alcohol ethoxylates) which are marketed by Japan Catalytic Chemical and BP Chemicals as SOFTANOL secondary alcohol ethoxylates. Union Carbide Chemical markets ethoxylated derivatives of the materials ia the United States under the TERGlTOL trademark (23). 

Other Processes. Isopropyl alcohol can be prepared by the Hquid-phase oxidation of propane (118). It is produced iacidentaHy by the reductive condensation of acetone, and is pardy recovered from fermentation (119). Large-scale commercial biological production of isopropyl alcohol from carbohydrate raw materials has also been studied (120—123). 

Linear ethoxylates are the preferred raw materials for production of ether sulfates used in detergent formulations because of uniformity, high purity, and biodegradabihty. The alkyl chain is usually in the to range having a molar ethylene oxide alcohol ratio of anywhere from 1 1 to 7 1. 

The hydrides can also be used to form primary alcohols from either terminal or internal olefins. The olefin and hydride form an alkenyl zirconium, Cp2ZrRCl, which is oxidized to the alcohol. Protonic oxidizing agents such as peroxides and peracids form the alcohol direcdy, but dry oxygen may also be used to form the alkoxide which can be hydrolyzed (234). 

It appeared that the impure alcohol isolated from balsam of Peru was, in fact, identical with nerolidol. When allowed to stand for three to four weeks with phenyl-isocyanate both alcohols yielded a phenyl-urethane, melting at 37" to 38°. A mixture of the two bodies suffered no depression in melting-point. The alcohols have the formula 15 260-The alcohol from balsam of Peru is therefore mixed with a small quantity -of an alcohol of higher specific gravity, the nature of which is still undetermined. Traces of benzyl alcohol were found in it, but not in sufficient quantity to account for the differences observed. Oxidation experiments did not throw any light on the question. It may therefore be safely assumed that the peruviol of Thoms consisted in the main of nerolidol, but contaminated with a substance of the same boiling-point to such an extent that its combustion figures pointed to the formula CjjH. jO instead of... 

Butylcyclohexanol has been prepared from />-/-butylphenol by reduction under a variety of conditions.3 4 Winstein and Holness5 prepared the pure trans alcohol from the commercial alcohol by repeated crystallization of the acid phthalate followed by saponification of the pure trans ester. Eliel and Ro 6 obtained 4-f-butylcyclohexanol containing 91% of the trans isomer by lithium aluminum hydride reduction of the ketone. Iliickel and Kurz 7 reduced />-/-butylphenol with platinum oxide in acetic acid and then separated the isomers by column chromatography. 

The addition of ethylene oxide to the alcohol causes a decrease in the melting point of the corresponding salt of the alcohol ether sulfate in comparison with the same alcohol sulfate. Weil et al. [65] prepared pure hexadecyl and octadecyl ether alcohols from the corresponding alkyl bromide and glycols with... 

The synthesis of (23) illustrates how a six-membered ring may bo used to control even more remote chiral centres. Reverse Michael disconnection leaves enone (24), an oxidation product from allylic alcohol (25). The double bond can come from elimination on bromohydrln (26) and hence from (27). 

The main oxidation product from dibenzyl ether is benzaldehyde (up to 80% yield) with smaller amounts of benzyl alcohol and benzoic acid. The rates of oxidation are only slightly affected by major stereochemical changes, and it is considered that an outer-sphere oxidation of the ether is followed by radical breakdown, viz. 

Oxidation Processes Scheidt and co-workers have employed cascade oxidation pathways from aUyhc or propargylic alcohols to afford unsaturated ester products 25. In situ oxidation of an unsaturated alcohol 21 to the enal 22 using MnO, ... 

Examples for necessary process improvements through catalyst research are the development of one-step processes for a number of bulk products like acetaldehyde and acetic acid (from ethane), phenol (from benzene), acrolein (from propane), or allyl alcohol (from acrolein). For example, allyl alcohol, a chemical which is used in the production of plasticizers, flame resistors and fungicides, can be manufactured via gas-phase acetoxylation of propene in the Hoechst [1] or Bayer process [2], isomerization of propene oxide (BASF-Wyandotte), or by technologies involving the alkaline hydrolysis of allyl chloride (Dow and Shell) thereby producing stoichiometric amounts of unavoidable by-products. However, if there is a catalyst... 

A number of papers have appeared on the use of layered double hydroxides (e.g. Mg and Al containing oxides). A meixnerite-like catalyst has been reported to give 100% selectivity for diacetone alcohol from acetone at 0 C at close to thermodynamic equilibrium conversion of 23% (Tichit and Fajula, 1999). The side-chain alkylation of toluene with propylene to give isobutyl benzene (for ibuprofen) is a well-known example where Na/K alloy on Na2C03/K2C03 is used as the catalyst. 

Out of the metal oxides, sulfated titania and tin oxide performed slightly better than the sulfated zirconia (SZ) catalyst and niobic acid (Nb205). However, SZ is cheaper and readily available on an industrial scale. Moreover, it is already applied in several industrial processes (7,8). Zirconia can be modified with sulfate ions to form a superacidic catalyst, depending on the treatment conditions (11-16). In our experiments, SZ showed high activity and selectivity for the esterification of fatty acids with a variety of alcohols, from 2-ethylhexanol to methanol. Increasing... 

Alcohols from Alkenes Through Hydroboration-Oxidation... 

Alcohols from Carbonyl Compounds. Oxidation-Reduction and Organometallic Compounds... 

The reaction of hydrogen atom abstraction by the alkylhydroxyperoxyl radical from alcohol limits chain propagation in oxidized alcohol [8,9]. 

---