Oxalic acid, reduction

Oxalates can be reduced to glyoxylates 533), in analogy to the oxalic acid reduction. Ester reductions have also been used for syntheses of cephalosporins 534 535>. 

Derivation (1) From vanadium pentoxide by oxalic acid reduction. (2) From vanadium pentoxide by carbon reduction. 

COMe)4Cl] with oxalic acid. Reduction with TP gives [Ru2(OGOMe)2(C204)2] via an intermediate containing two ruthenium atoms and one titanium atom. ... 

Oxalic acid. Reduction of this acid with magnesium and chromotropic acid gives rise to glycolic acid, from which cone. H2SO4 liberates formaldehyde, which can be detected, for example, with chromotropic acid. When melted with diphenylamine or carbazole, oxalic acid gives triphenylmethane dyes. 

Reduction of acid permanganate. Add a few ml. of dil. HgSO to 1 ml. of a solution of oxalic acid or of an oxalate. Warm gently and add a dilute solution of KMn04 drop by drop and note the decolorisation. 

NOTE. Many esters reduce Fehling s solution on warming. This reduction occurs rapidly with the alkyl esters of many aliphatic acids, but scarcely at all with similar esters of aromatic acids (f.g., ethyl oxalate reduces, but ethyl benzoate does not). Note also that this is a property of the ester itself thus both methyl and ethyl oxalate reduce Fehling s solution very rapidly, whereas neither oxalic acid, nor sodium oxalate, nor a mixture of the alcohol and oxalic acid (or sodium oxalate), reduces the solution. 

In a complexation reaction, a Lewis base donates a pair of electrons to a Lewis acid. In an oxidation-reduction reaction, also known as a redox reaction, electrons are not shared, but are transferred from one reactant to another. As a result of this electron transfer, some of the elements involved in the reaction undergo a change in oxidation state. Those species experiencing an increase in their oxidation state are oxidized, while those experiencing a decrease in their oxidation state are reduced, for example, in the following redox reaction between fe + and oxalic acid, H2C2O4, iron is reduced since its oxidation state changes from -1-3 to +2. 

The process is one of electrolytic reduction and the apparatus is similar to that shown in Fig. 77, p. 144. It consists of a small porous cell (8 cm. x 2 cm. diam.) surrounded by a narrow beaher (ii cm. X 6 cm. diam.). The oxalic acid, mixed w lth too c.f. 10 per cent sulphuric acid (titrated against standard baryl.a solution] forms the cathode liquid and is placed in Iht beakei. The porous cell is filled with the same strength of siilphuiic acid and foims the anode liquid. The electrodes ara made from 01 dinary clean sheet lead. The anode consists of i thiu strip projecting about two inches from the cell and tliu... 

EbuUioscopic method, 37 Electrolytic reduction, oxalic acid, 102 nitrobenzene, 144, 145 Eosin, 187 Epichlorhydrin, in Estimation of carbon and hydrogen, 4 halogens, 22 nitrogen, 13 sulphur, 28 Ether, 59... 

On a laboratory scale reduction of KCIO3 with moist oxalic acid generates the gas suitably diluted with oxides of carbon ... 

The first use of chiral oxazolines as activating groups for nucleophilic additions to arenes was described by Meyers in 1984. " Reaction of naphthyloxazoline 3 with phenyllithium followed by alkylation of the resulting anion with iodomethane afforded dihydronaphthalene 10 in 99% yield as an 83 17 mixture of separable diastereomers. Reductive cleavage of 10 by sequential treatment with methyl fluorosulfonate, NaBKi, and aqueous oxalic acid afforded the corresponding enantiopure aldehyde 11 in 88% yield. 

According to the authors, (Mg2+) is included in the numerator as well as in the denominator because it reacts with oxalic acid to form Mg(C204), which is more soluble than Ca(C204) thus decreasing the C.P. But it also reacts with citrate to form magnesium citrate resulting in a reduction of (citrate). 

Hydrocarbon A has the formula C Hg- It absorbs 8 equivalents of H2 on catalytic reduction over a palladium catalyst. On ozonolysis, only two products are formed oxalic acid (H02CC02H) and succinic acid (H02CCH2CH2C02H). Write the reactions, and propose a structure for A. 

The oxidation of oxalic acid by mercuric chloride to give CO2 and mercurous chloride is a classic example of an induced reaction. This reaction is extremely slow unless small quantities of chromic acid and manganous ions are added, whereon facile reduction takes place Addition of permanganate or persulphate and some reducing agents is also effective and the oxidation proceeds readily under photo- or X-irradiation (Eder s reaction). The large quantum yield points to a chain mechanism , which could also function with an inducing oxidant, viz. 

Redox titrants (mainly in acetic acid) are bromine, iodine monochloride, chlorine dioxide, iodine (for Karl Fischer reagent based on a methanolic solution of iodine and S02 with pyridine, and the alternatives, methyl-Cellosolve instead of methanol, or sodium acetate instead of pyridine (see pp. 204-205), and other oxidants, mostly compounds of metals of high valency such as potassium permanganate, chromic acid, lead(IV) or mercury(II) acetate or cerium(IV) salts reductants include sodium dithionate, pyrocatechol and oxalic acid, and compounds of metals at low valency such as iron(II) perchlorate, tin(II) chloride, vanadyl acetate, arsenic(IV) or titanium(III) chloride and chromium(II) chloride. 

As an alternative to oxidative bleaching with sodium chlorite, acrylic fibres may be given a reductive bleach using sodium bisulphite in the presence of oxalic acid. This method is... 

Ito et al.40 examined the electrochemical reduction of C02 in dimethylsulfoxide (DMSO) with tetraalkylammonium salts at Pb, In, Zn, and Sn under high C02 pressures. At a Pb electrode, the main product was oxalic acid with additional products such as tartaric, malonic, glycolic, propionic, and n-butyric acids, while at In, Zn, and Sn electrodes, the yields of these products were very low (Table 3), and carbon monoxide was verified to be the main product even at a Pt electrode, CO was mainly produced in nonaqueous solvents such as acetonitrile and DMF.41 Also, the products in propylene carbonate42 were oxalic acid at Pb, CO at Sn and In, and substantial amounts of oxalic acid, glyoxylic acid, and CO at Zn, indicating again that the reduction products of C02 depend on the electrode materials used. 

The first catalysts reported for the electroreduction of C02 were metallophthalocyanines (M-Pc).126 In aqueous solutions of tetraalkylammonium salts, current-potential curves at a cobalt phthalocyanine (Co-Pc)-coated graphite electrode showed a reduction current peak whose height was proportional to the C02 concentration and to the square root of the potential sweep rate at a given C02 concentration. On electrolysis, oxalic acid and glycolic acid were detected, but formic acid was not. Mn and Pd phthalocyanines were inactive, while Cu and Fe phthalocyanines were slightly active. At the potentials used for C02 reduction, M-Pc catalysts would be in their dinegative state, and the occupied dz2 orbital of the metal ion in the metallophthalocyanine was suggested to play an important role in the catalytic activity. 

Cobalt porphyrin derivatives were also reported129 to be active for electrochemical reduction of C02 to formic acid at an amalgamated Pt electrode. More recently, Becker et al have reported130 that Ag2+ and Pd2+ metalloporphyrins acted as homogeneous catalysts for C02 reduction in dry CH2C12 oxalic acid and H2 (its source was not clear) were produced, but no CO was detected. 

Tinnemans et al.132 have examined the photo(electro)chemical and electrochemical reduction of C02 using some tetraazamacrocyclic Co(II) and Ni(II) complexes as catalysts. CO and H2 were the products. Pearce and Pletcher133 have investigated the mechanism of the reduction of C02 in acetonitrile-water mixtures by using square planar complexes of nickel and cobalt with macrocyclic ligands in solution as catalysts. CO was the reduction product with no significant amounts of either formic or oxalic acids... 

Reduction of carbon dioxide takes place at various metal electrodes. The main products are formic acid in aqueous solutions and oxalate, CO, and formic acid in nonaqueous solutions. An indium electrode is the most potential saving for C02 reduction. Due to the difference in optimum conditions between those for C02 reduction to formic acid and those for formic acid reduction to further reduced products, direct reduction of C02 in aqueous solutions without a catalyst to highly reduced products seems to be difficult at metal electrodes. However, catalytic effects of metal electrodes themselves have recently become more clear for example, on Cu, methane was detected, while on Ag and Au, CO was produced effectively in aqueous solutions. Furthermore, at a Mo electrode, methanol was obtained. The power efficiency is, however, still low at any electrode. 

Carbon dioxide and water are the major waste products from most natural and industrial processes and hence are found in large quantities in the environment. If an efficient and cheap means could be found, the reduction of C02 could provide a potentially rich source of carbon for utilisation in the production of, for example, synthetic hydrocarbon fuels to replace petroleum, formic and oxalic acids for the chemical industries and foodstuffs such as glucose. 

The study of the catalytic wet peroxide oxidation of p-coumaric acid over (Al-Fe)PILC has shown a complete removal of aromatic compounds and high TOC reduction (ca.50%) in 4 hours of reaction, leading at the end to total mineralization products (C02 and H20) and traces of oxalic acid. 

This analytical procedure is based on an optimum analysis condition for segmented continuous flow analysis. The sample is combined with a molybdate solution at a pH between 1.4 and 1.8 to form the //-molybdosilicic acid. After an appropriate time for reaction, a solution of oxalic acid is added, which transforms the excess molybdate to a non-reducible form. The oxalic acid also suppresses the interference from phosphate by decomposing phosphomolyb-dic acid. Finally, a reductant is added to form molybdenum blue. Both ascorbic acid and stannous chloride were tested as reductants. 

MllOj Reduction with arsenate(III), ascorbic acid, azide, hydrazine, hydroxylamine, oxalic acid, sulfite, or thiosulfate... 

Multiple products are possible from C02 hydrogenation, but all of the products are entropically disfavored compared to C02 and H2 (Scheme 17.1). As a result, the reactions must be driven by enthalpy, which explains why formic acid is usually prepared in the presence of a base or another reagent with which formic acid has an exothermic reaction. Of the many reduction products that are theoretically possible, including formic acid, formates, formamides, oxalic acid, methanol, CO, and methane, only formic acid and its derivatives are readily prepared by homogeneous catalysis. 

---