Organic solvents catalyst formulation

Efficient biocatalysis in neat organic solvent depends on the careful choice of the method of dehydrated enzyme preparation and solvent used. Optimization of these factors towards a given transformation is often known as catalyst formulation and solvent, or medium, engineering respectively, both of which will be briefly discussed below. Catalyst engineering which also provides a powerful method of improving activity and stability, is discussed in Chapter 2. 

The BP utilises formation of a derivative in order to quantify penicillins in formulations. Some penicillins do not have distinctive chromophores a further problem with these molecules is that when they are in suspensions they are not readily extracted away from excipients since they are quite insoluble in organic solvents which are immiscible with water. Using the formation of a complex with the mercuric ion in the presence of imidazole as a catalyst, a derivative of the penicillin structure is produced, which has an absorption maximum between 325 and 345 nm. In the assay, comparison with pure standard for the particular penicillin is carried out rather than relying on a standard A(l%, 1 cm) value. This assay is used by the BP for... 

Phenolic materials go back to the patents of Baekeland and are based upon the reaction of phenol and formaldehyde to yield a lower molecular weight resinous material that can be formulated with other resins and sometimes other curatives to yield a paste adhesive or a film adhesive. When phenol and formaldehyde are reacted in the presence of an acidic catalyst with an excess of phenol versus formaldehyde, they yield what are known as novolac resins. These materials are soluble in organic solvents and do not react further with themselves thus, they need to have a curative added. That curative is most often hexamethylene tetraamine. Another type of phenolic resin can be generated with an excess of formaldehyde and under basic conditions. These materials, known as resole phenolics, will react with themselves to yield a ftilly cured phenolic and thus must be stored frozen in order to limit this reaction. Thus, resole phenolics do not need an external CTOsslinker. Resole phenolics are widely used in the binding of paper products and the bonding of wood. Adhesives based upon these materials were brittle and could only be used to bond wood, where it is still widely used. A more widely usable adhesive was developed during World War II which modified the very brittle phenolic adhesive with poly(vinyl formal) resins. These materials were... 

In contrast to specifying to suppliers what chemicals or materials are restricted, it is useful to specify exactly what chemicals and materials are desired. Once a material or chemical is well characterized, and it is considered benign with respect to human and environmental health, it can be added to a preferred or positive list (i.e., P-list). For example, a textile manufacturer may source certified organic cotton, or polyester made with antimony-free catalysts, to develop a product line based on these fibres. Or a cleaning product formulator may seek bio-based solvents or rapidly biodegradable surfactants consistent with their product development objectives. 

Model formulation. After the objective of modelling has been defined, a preliminary model is derived. At first, independent variables influencing the process performance (temperature, pressure, catalyst physical properties and activity, concentrations, impurities, type of solvent, etc.) must be identified based on the chemists knowledge about reactions involved and theories concerning organic and physical chemistry, mainly kinetics. Dependent variables (yields, selectivities, product properties) are defined. Although statistical models might be better from a physical point of view, in practice, deterministic models describe the vast majority of chemical processes sufficiently well. In principle model equations are derived based on the conservation law ... 

There are two basic VPI resin formulations. One is based on epoxy resins, and the other is based on unsaturated polyesters. Both are typically one-part solventless compositions that are completely polymerizable. Volatile, nonpolymerizable solvents cannot be tolerated because these will lead to bubbling in the vacuum impregnation procedure. To control viscosity of the resin formulations, the epoxies contain low-viscosity, reactive diluents of the monoglycidyl ether type the unsaturated polyester formulations contain styrene or vinyltoluene as reactive diluents. Both resin types contain catalysts that become active only at elevated temperatures to insure long-term stability at room temperature. The epoxy resins are frequently catalyzed with metal organic compounds such as titanium complexes, and peroxides are usually the main catalyst in the unsaturated polyester formulations. In addition to the ingredients mentioned here, the compositions may contain additives such as cocatalysts, activators, and accelerators. However, there are no particular fillers used in VPI resins. 

Since biocompatibility is a precondition for medical and pharmaceutical application and moreover controlled degradability, by UV radiation or in vivo, it is highly desirable for use of polymers as drug carrier in subdermal implants or film former in ointment formulations the choice of suitable co-monomers is limited. Another prerequisite for this segment of application is the complete absence of heavy-metal catalysts and other, potentially toxic, organic residues such as solvents or residual monomer in the final product that has to be addressed by the synthetic procedure. 

---