Of magnesium

Dow process The process for the extraction of magnesium from sea-water by precipitation of Mg(OH)2 by Ca(OH)2 followed by solution of the hydroxide in hydrochloric acid. 

C12H9N3O4. A brownish-red powder, soluble in sodium hydroxide. Used for the detection and estimation of magnesium, with which it forms a blue lake in alkaline solutions. 

In Fig. III-7 we show a molecular dynamics computation for the density profile and pressure difference P - p across the interface of an argonlike system [66] (see also Refs. 67, 68 and citations therein). Similar calculations have been made of 5 in Eq. III-20 [69, 70]. Monte Carlo calculations of the density profile of the vapor-liquid interface of magnesium how stratification penetrating about three atomic diameters into the liquid [71]. Experimental measurement of the transverse structure of the vapor-liquid interface of mercury and gallium showed structures that were indistinguishable from that of the bulk fluids [72, 73]. 

This produces sufficient concentrations of magnesium and calcium ions to render the water hard. The above reaction is readily reversed by boiling the water when the magnesium and calcium ions responsible for the hardness are removed as the insoluble carbonate. 

If an excess of magnesium is used, magnesium silicide, Mg2Si, is also produced.) The silicon obtained is a light brown hygroscopic powder. Crystalline or metallic silicon is obtained industrially by the reduction of silica with carbon in an electric arc furnace ... 

The chromates of the alkali metals and of magnesium and calcium are soluble in water the other chromates are insoluble. The chromate ion is yellow, but some insoluble chromates are red (for example silver chromate, Ag2Cr04). Chromates are often isomorph-ous with sulphates, which suggests that the chromate ion, CrO has a tetrahedral structure similar to that of the sulphate ion, SO4 Chromates may be prepared by oxidising chromium(III) salts the oxidation can be carried out by fusion with sodium peroxide, or by adding sodium peroxide to a solution of the chromium(IIl) salt. The use of sodium peroxide ensures an alkaline solution otherwise, under acid conditions, the chromate ion is converted into the orange-coloured dichromate ion ... 

Place 8 0 g. of magnesium turnings or ribbon and 80 ml. of the dry benzene in the flask. Prepare a solution of 9-0 g. of mercuric chloride in 50 ml. of the dry acetone, transfer it to the dropping-funnel, and then allow it to enter the flask slowly at first, and then more rapidly, so that the addition takes about 3-5 minutes. The reaction usually starts shortly after the initial addition of the mercuric chloride solution if it is delayed, it may then start vigorously, and the flask may have to be cooled in water to prevent escape of acetone through the condenser. 

As the reaction beings to subside, run in from the dropping-funnel without delay a mixture of 25 ml. of acetone and 20 ml. of benzene, in order to maintain a brisk and continuous reaction. When the reaction finally subsides, heat the mixture on a boiling water-bath for 45 minutes with occasional shaking. If the shaking does not break up the spongy mass of magnesium pinacolate,... 

Fit a 50 ml. round-bottomed flask to a reflux water-condenser fitted with a calcium chloride tube. Dissolve 1-05 ml. of dry bromobenzene in 5 ml. of dry ether and add this solution to 0-25 g. of magnesium contained in the round-bottomed flask. Now add a crystal of iodine so that it rests on the magnesium. Warm if necessary to start the reaction if the latter becomes too vigorous immerse the flask in cold... 

Reaction (1) usually proceeds readily provided the magnesium is activated with iodine and the water content does not exceed one per cent. Subsequent interaction between the magnesium ethoxide and water gives the highly insoluble magnesium hydroxide only a slight excess of magnesium is therefore necessary. 

Prepare a Grignard reagent from 24 -5 g. of magnesium turnings, 179 g. (157 ml.) of n-heptyl bromide (Section 111,37), and 300 ml. of di-n-butyl ether (1). Cool the solution to 0° and, with vigorous stirring, add an excess of ethylene oxide. Maintain the temperature at 0° for 1 hour after the ethylene oxide has been introduced, then allow the temperature to rise to 40° and maintain the mixture at this temperature for 1 hour. Finally heat the mixture on a water bath for 2 hours. Decompose the addition product and isolate the alcohol according to the procedure for n-hexyl alcohol (Section 111,18) the addition of benzene is unnecessary. Collect the n-nonyl alcohol at 95-100°/12 mm. The yield is 95 g. 

Add 4 0 g. (4 0 ml.) of pure anihne dropwise to a cold solution of ethyl magnesium bromide (or iodide) prepared from 1 Og. of magnesium, 5 0 g. (3-5 ml.) of ethyl bromide (or the equivalent quantity of ethyl iodide), and 30 ml. of pure, sodium-dried ether. When the vigorous evolution of ethane has ceased, introduce 0 02 mol of the ester in 10 ml. of anhydrous ether, and warm the mixture on a water bath for 10 minutes cool. Add dilute hydrochloric acid to dissolve the magnesium compounds and excess of aniline. Separate the ethereal layer, dry it with anhydrous magnesium sulphate and evaporate the ether. Recrystallise the residual anihde, which is obtained in almost quantitative yield, from dilute alcohol or other suitable solvent. 

Alternatively, add a solution of 4 5 g. of p-toluidine in dry ether to the Grignard reagent prejjared from 1 0 g. of magnesium as detailed above. Then introduce 1 0 g. (or 0 02 mol) of the ester and proceed as described lOr anihdes. 

Prepare a solution of benzyl magnesium chloride in a 2-litre three-necked flask from 24-3 g. of magnesium turnings, 600 ml. of sodium-dried ether and 126-5 g. (115 ml.) of redistilled benzyl chloride follow the experimental details given under n-Propylbenzene (Section IV,7). Cool the flask in running water or in ice water. Place a solution of 456 g. of n-butyl-p-toluenesulphonate (Section IV,198) in about twice its volume of anhydrous ether in the dropping funnel, and add it slowly with stirring, at such a rate that the ether just boils a white solid soon forms. The addition is complete after about 2 hours. Pour the reaction product... 

Phenylacetic acid. Use 5 0 g. of magnesium, 25 g, (23 ml.) of redistilled benzyl chloride (Section IV,22) and 75 ml. of sodium-dried ether. Allow the reaction mixture to warm to 15° and then decompose it with dilute hydrochloric or sulphuric acid. Filter off the crude acid and recrystallize it from water. The yield of pure phenylacetic acid, m.p. 76-77°, is 11 g. 

In an alternative method of preparation, benzophenone is used. Prepare the Grignard reagent from 13 -5 g. of magnesium turnings as above, cool in cold water, and add a solution of 91 g. of benzophenone (Section IV,139) in 200 ml. of dry benzene at such a rate that the mixture refluxes gently. Reflux the mixture for 60 minutes, and isolate the triphenylcarbinol in the manner described above. The yield is of the same order. 

Propiophenone. Prepare a solution of diphenyl-cadmium in 110 ml. of dry benzene using 4 9 g. of magnesium, 32 4 g. of bromobenzene and 19 5 g. of anhydrous cadmium chloride. Cool the solution to 10°, and add during 3 minutes a solution of 14 -8 g. of propionyl chloride (b.p. 78-79°) in 30 ml. of dry benzene use external coohng with an ice bath to prevent the temperature from rising above 40°. Stir the mixture for 2 hours at 25-35°. Work up the product as detailed above except that 6 per cent, sodium carbonate solution should replace the saturated sodium bicarbonate solution. The yield of propiophenone, b.p. 100-102°/16 mm., is 17 6 g. 

Prepare a saturated solution of sodium sulphide, preferably from the fused technical sodium polysulphide, and saturate it with sulphur the sulphur content should approximate to that of sodium tetrasulphide. To 50 ml. of the saturated sodium tetrasulphide solution contained in a 500 ml. round-bottomed flask provided with a reflux condenser, add 12 -5 ml. of ethylene dichloride, followed by 1 g. of magnesium oxide to act as catalyst. Heat the mixture until the ethylene dichloride commences to reflux and remove the flame. An exothermic reaction sets in and small particles of Thiokol are formed at the interface between the tetrasulphide solution and the ethylene chloride these float to the surface, agglomerate, and then sink to the bottom of the flask. Decant the hquid, and wash the sohd several times with water. Remove the Thiokol with forceps or tongs and test its rubber-like properties (stretching, etc.). 

Place 12g of magnesium into the flask along with 200ml of THF and stir. Place lOOg of bromobenzodioxole along with 200ml of... 

The flask was charged with 48 g of magnesium and 200 ml of dry diethyl ether. 1,2-Dibromoethane (4 ml) was added. After a few minutes a vigorous reaction started and the diethyl ether began to reflux. When this reaction had subsided, 500 ml of dry diethyl ether were added. Stirring was started and 1.0 mol of chlorocyclohexane (note 1) was added from the dropping funnel at a rate such that the diethyl ether gently refluxed (note 2). After this addition, which was carried out in 1 h, the flask was heated under reflux for a further 1 h. 

---