Objective implementation

A Java class chooses its internal data members that collaborate to implement a Java interface similarly, a traditional program with a set of global variables referring to its collaborating top-level objects implements a specification of the entire process as a type. 

This is an abstract model of the state of the whole System, and says nothing about its construction — whether it is distributed or centralised, whether the links are database keys or pointers, whether the types can be found in the implementation as individual classes. These matters are all left to the design phase a distributed object implementation, or a server-based one with remote screen-control clients would both be equally valid choices. 

The calculations of the CMC distances by means of eqs. (7.3) and (7.4), and subsequent multidimensional scaling analysis, yields a 2D projection (see fig. 9.3) that differs from the EMC analysis in two respects. The reaction pathway predicted by EMC correctly shows the close correlation of the enzymatic catalyst Xg and species X. It also shows correctly the chain of linear reactions from Xi to Xt. The CMC method also shows that Xg is correlated with, but more weakly. Less importantly, the CMC method yields a wrap-around in the placing of species 7. However, the 3D representation of the multidimensional CMC object implemented by stressing the original CMC distances into three rather than two dimensions results in the correct sequencing of the species the species points lie on a 3D spiral, which when projected onto two dimensions results in the wrap-around effect. 

Thus, these issues inspire the authors to conduct OEA. The further subsection discusses the objectives, implementation, and assessment strategy of OEA. 

The material object implements a set of interfaces, including the ICapeThermoSystem, ICapeThermoPropertyPackage, ICapeThermoMaterialObJect, and... 

Formulate implementation plans to accomplish prioritized objectives Implementation and operation... 

Leaders, leadership team, managers Build OE culture Demonstrate leadership and commitment Align to OE vision and objectives Establish vision and objectives Implement OE processes Be accountable Participate in OE and ensure others do Act as a role model Participate in assessments... 

Artificial lift techniques are discussed in Section 9.6. During production, the operating conditions of any artificial lift technique will be optimised with the objective of maximising production. For example, the optimum gas-liquid ratio will be applied for gas lifting, possibly using computer assisted operations (CAO) as discussed in Section 11.2. Artificial lift may not be installed from the beginning of a development, but at the point where the natural drive energy of the reservoir has reduced. The implementation of artificial lift will be justified, like any other incremental project, on the basis of a positive net present value (see Section 13.4). 

NDT as an objective method, which can be applied for 100% control if necessary, is used for quality assessment of critical components all over the world. But it is necessary to support quality of the implementation of NDT to ensure the detection of defects and to achieve reliable results. 

NAMD was implemented in an object-oriented fashion (Fig. 3). Patches, the encapsulated communication subsystem, the molecular structure, and various output methods were objects. Every patch owned specialized objects... 

Load balancing can then be achieved in NAMD 2 by moving compute objects and patches between nodes. But what if a compute object and a patch it depends on are on different nodes Compute objects individually communicating with off-node patches would generate a huge amount of redundant communication. Therefore, patches are represented on other nodes by proxy patches, which implement the same interface as home patches for dealing with compute objects and handling dependencies but receive coordinates from and... 

Nuclear power plants of the future are to be designed and operated with the objective of better fiilfiUing the role as a bulk power producer that, because of reduced vulnerabiUty to severe accidents, should be more broadly accepted and implemented. Use of these plants could help stem the tide of environmental damage caused by air pollution from fossil-fuel combustion products (64). 

The thermodynamics and physical properties of the mixture to be separated are examined. VLE nodes and saddles, LLE binodal curves, etc, are labeled. Critical features and compositions of interest are identified. A stream is selected from the source Hst. This stream is either identified as meeting all the composition objectives of a destination, or else as in need of further processing. Once an opportunistic or strategic operation is selected and incorporated into the flow sheet, any new sources or destinations are added to the respective Hsts. If a strategic separation for dealing with a particular critical feature has been implemented, then that critical feature is no longer of concern. Alternatively, additional critical features may arise through the addition of new components such as a MSA. The process is repeated until the source Hst is empty and all destination specifications have been satisfied. 

The original objective of the ISO classification was to issue detailed standards for cemented carbides in terms of microstmcture, composition, and properties for quaUty control and performance rehabiUty. This objective, however, is yet to be realized. Increased emphasis on worldwide implementation of ISO 9000 standards and globalization of manufacturing, may lead the industry-at-large to adopt the ISO classification. 

---