Nucleophilic with nucleophiles

This equation, when applied to an ambident nucleophile with nucleophilic centers 1 and 2, becomes... 

The two possible valence-bond structures of the enolate anion, 7a and 7b, show that the anion should act as an ambident nucleophile—a nucleophile with nucleophilic properties associated with both carbon and oxygen. The addition step in the aldol reaction therefore may be expected to take place in either of two ways The anion could attack as a carbon nucleophile to form a carbon-carbon bond, 8, leading ultimately to the aldol 9, or it might attack as an oxygen nucleophile to form a carbon-oxygen bond, thereby leading to the hemiacetal 10. By this reasoning, we should obtain a mixture of products 9 and 10. However, the aldol 9 is the only one of these two possible products that can be isolated ... 

The present procedure illustrates the use of added iodide anion to promote the Mannich cyclization of an alkyne to afford 3-alkylidenepiperidines. As illustrated in Table I a variety of nonbasic nucleophiles with nucleophilic constants T1-CH3I >5.8 are useful promoters of formaldiminium ion-alkyne cyclizations. Piperidines containing both endocyclic and exocyclic allylic unsaturation can be efficiently assembled in this way from readily available alkynol precursors (see Table 1). To the limits of f H NMR detection at 500 MHz all nucleophile-promoted cyclizations that form... 

Successful cyclization reactions of alkynes with weakly electrophilic iminium ions requires the presence of strong external nucleophiles. The only study to date which addresses the nature of useful cyclization promoters indicates that nonbasic nucleophiles with nucleophilic constants T)-Mel > 5.8 are required. ... 

Oxidative cross-coupling Nucleophile with nucleophile PhB(OH)2 + PhNH Ph-NHPh... 

These reactions follow first-order kinetics and proceed with racemisalion if the reaction site is an optically active centre. For alkyl halides nucleophilic substitution proceeds easily primary halides favour Sn2 mechanisms and tertiary halides favour S 1 mechanisms. Aryl halides undergo nucleophilic substitution with difficulty and sometimes involve aryne intermediates. 

Methods of producing B —C bonds include hydroboration, nucleophilic displacement at a boron atom in BX., (X = halogens or B(0R>3) by e.g. a Grignard reagent, and a psewiio-Friedel-Crafts reaction with an aromatic hydrocarbon, BX3, and AICI3. 

Thus, to name just a few examples, a nucleophilic aliphatic substitution such as the reaction of the bromide 3.5 with sodium iodide (Figure 3-21a) can lead to a range of stereochemical products, from a l l mbrture of 3.6 and 3.7 (racemization) to only 3.7 (inversion) depending on the groups a, b, and c that are bonded to the central carbon atom. The ring closure of the 1,3-butadiene, 3.8, to cyclobutene... 

Figure 3-22 shows a nucleophilic aliphatic substitution with cyanide ion as a nucleophile, i his reaction is assumed to proceed according to the S f2 mechanism with an inversion in the stereochemistry at the carbon atom of the reaction center. We have to assign a stereochemical mechanistic factor to this reaction, and, clearly, it is desirable to assign a mechanistic factor of (-i-1) to a reaction with retention of configuration and (-1) to a reaction with inversion of configuration. Thus, we want to calculate the parity of the product, of 3 reaction from the parity of the... 

Now we cany out the same reaction with thiolate as nucleophile, as shown in Figure 3-23. hlowever, we must now realize that the product has a parity of (+ 1) although we have the same mechanism as in Figure 3-22 with inversion of configuration. 

The Claisen condensation is initiated by deprotonation of an ester molecule by sodium ethanolate to give a carbanion that is stabilized, mostly by resonance, as an enolate. This carbanion makes a nucleophilic attack at the partially positively charged carbon atom of the e.ster group, leading to the formation of a C-C bond and the elimination ofan ethanolate ion, This Claisen condensation only proceeds in strongly basic conditions with a pH of about 14. 

The purpose of this eornpuLer project is Lo examine several polynuclear aromatic hydrocarbons and to relate their electron density patterns to their carcinogenic activity. If nucleophilic binding to DN.A is a significant step in blocking the normal transcription process of DN.A, electron density in the hydrocarbon should be positively correlated to its carcinogenic potency. To begin with, we shall rely on clinical evidence that benzene, naphthalene, and phenanthrene... 

The Grignard reagent RMgX is nucleophilic by virtue of the potential car banion (alkyl anion) R. It will react with the electrophilic carbonyl group as follows ... 

In the strongly basic medium, the reactant is the phenoxide ion high nucleophilic activity at the ortho and para positions is provided through the electromeric shifts indicated. The above scheme indicates theorpara substitution is similar. The intermediate o-hydroxybenzal chloride anion (I) may react either with a hydroxide ion or with water to give the anion of salicyl-aldehyde (II), or with phenoxide ion or with phenol to give the anion of the diphenylacetal of salicylaldehyde (III). Both these anions are stable in basic solution. Upon acidification (III) is hydrolysed to salicylaldehyde and phenol this probably accounts for the recovery of much unreacted phenol from the reaction. 

Perhaps the most extensively studied catalytic reaction in acpreous solutions is the metal-ion catalysed hydrolysis of carboxylate esters, phosphate esters , phosphate diesters, amides and nittiles". Inspired by hydrolytic metalloenzymes, a multitude of different metal-ion complexes have been prepared and analysed with respect to their hydrolytic activity. Unfortunately, the exact mechanism by which these complexes operate is not completely clarified. The most important role of the catalyst is coordination of a hydroxide ion that is acting as a nucleophile. The extent of activation of tire substrate througji coordination to the Lewis-acidic metal centre is still unclear and probably varies from one substrate to another. For monodentate substrates this interaction is not very efficient. Only a few quantitative studies have been published. Chan et al. reported an equilibrium constant for coordination of the amide carbonyl group of... 

The higjily water-soluble dienophiles 2.4f and2.4g have been synthesised as outlined in Scheme 2.5. Both compounds were prepared from p-(bromomethyl)benzaldehyde (2.8) which was synthesised by reducing p-(bromomethyl)benzonitrile (2.7) with diisobutyl aluminium hydride following a literature procedure2.4f was obtained in two steps by conversion of 2.8 to the corresponding sodium sulfonate (2.9), followed by an aldol reaction with 2-acetylpyridine. In the preparation of 2.4g the sequence of steps had to be reversed Here, the aldol condensation of 2.8 with 2-acetylpyridine was followed by nucleophilic substitution of the bromide of 2.10 by trimethylamine. Attempts to prepare 2.4f from 2.10 by treatment with sodium sulfite failed, due to decomposition of 2.10 under the conditions required for the substitution by sulfite anion. 

Under superacidic, low nucleophilicity so-called stable ion conditions, developing electron-deficient carbocations do not find reactive external nucleophiles to react with thus they stay persistent in solution stabilized by internal neighboring group interactions. 

This realization led me to study related possible intermolecular electrophilic reactions of saturated hydrocarbons, Not only protolytic reactions but also a broad scope of reactions with varied electrophiles (alkylation, formylation, nitration, halogenation, oxygenation, etc.) were found to be feasible when using snperacidic, low-nucleophilicity reaction conditions. 

In their reactions with suitable nucleophiles, such as tt-aromatics or heteroatom donor nucleophiles, the readily polarizable linear acylium ions shift a Tt-electron pair to oxygen, bending the ions and developing an empty p-orbital at the carbocationic center. This enables the reaction with aromatics. The acetylation of benzene can be depicted as... 

There are ways to plot data with several pieces of data at each point in space. One example would be an isosurface of electron density that has been colorized to show the electrostatic potential value at each point on the surface (Figure 13.6). The shape of the surface shows one piece of information (i.e., the electron density), whereas the color indicates a different piece of data (i.e., the electrostatic potential). This example is often used to show the nucleophilic and electrophilic regions of a molecule. 

These systems nitrate aromatie eompounds by a proeess of electro-philie substitution, the eharacter of whieh is now understood in some detail ( 6.1). It should be noted, however, that some of them ean eause nitration and various other reactions by less well understood processes. Among sueh nitrations that of nitration via nitrosation is especially important when the aromatic substrate is a reactive one ( 4.3). In reaetion with lithium nitrate in aeetie anhydride, or with fuming nitrie aeid, quinoline gives a small yield of 3-nitroquinoline this untypieal orientation (ef. 10.4.2 ) may be a eonsequenee of nitration following nucleophilic addition. ... 

General problems with synthetic organic reactions are discussed together with some practical solutions for specific examples. These problems include 9 regio- and stereoselectivity by exploitation of the substrates stereochemistry (e.g., p. 20ff.) and differentiated nucleophilicity (p. 24f, 44f, 56ff.)... 

The formation of the above anions ("enolate type) depend on equilibria between the carbon compounds, the base, and the solvent. To ensure a substantial concentration of the anionic synthons in solution the pA" of both the conjugated acid of the base and of the solvent must be higher than the pAT -value of the carbon compound. Alkali hydroxides in water (p/T, 16), alkoxides in the corresponding alcohols (pAT, 20), sodium amide in liquid ammonia (pATj 35), dimsyl sodium in dimethyl sulfoxide (pAT, = 35), sodium hydride, lithium amides, or lithium alkyls in ether or hydrocarbon solvents (pAT, > 40) are common combinations used in synthesis. Sometimes the bases (e.g. methoxides, amides, lithium alkyls) react as nucleophiles, in other words they do not abstract a proton, but their anion undergoes addition and substitution reactions with the carbon compound. If such is the case, sterically hindered bases are employed. A few examples are given below (H.O. House, 1972 I. Kuwajima, 1976). 

The ketone is added to a large excess of a strong base at low temperature, usually LDA in THF at -78 °C. The more acidic and less sterically hindered proton is removed in a kineti-cally controlled reaction. The equilibrium with a thermodynamically more stable enolate (generally the one which is more stabilized by substituents) is only reached very slowly (H.O. House, 1977), and the kinetic enolates may be trapped and isolated as silyl enol ethers (J.K. Rasmussen, 1977 H.O. House, 1969). If, on the other hand, a weak acid is added to the solution, e.g. an excess of the non-ionized ketone or a non-nucleophilic alcohol such as cert-butanol, then the tautomeric enolate is preferentially formed (stabilized mostly by hyperconjugation effects). The rate of approach to equilibrium is particularly slow with lithium as the counterion and much faster with potassium or sodium. 

The Peterson reaction has two more advantages over the Wittig reaction 1. it is sometimes less vulnerable to sterical hindrance, and 2. groups, which are susceptible to nucleophilic substitution, are not attacked by silylated carbanions. The introduction of a methylene group into a sterically hindered ketone (R.K. Boeckman, Jr., 1973) and the syntheses of olefins with sulfur, selenium, silicon, or tin substituents (D. Seebach, 1973 B.T. Grdbel, 1974, 1977) illustrate useful applications. The reaction is, however, more limited and time consuming than the Wittig reaction, since metallated silicon derivatives are difficult to synthesize and their reactions are rarely stereoselective (T.H. Chan, 1974 ... 

The only common synthons for alkynes are acetylide anions, which react as good nucleophiles with alkyl bromides (D.E. Ames, 1968) or carbonyl compounds (p. 52, 62f.). 

In the synthesis of molecules without functional groups the application of the usual polar synthetic reactions may be cumbersome, since the final elimination of hetero atoms can be difficult. Two solutions for this problem have been given in the previous sections, namely alkylation with nucleophilic carbanions and alkenylation with ylides. Another direct approach is to combine radical synthons in a non-polar reaction. Carbon radicals are. however, inherently short-lived and tend to undergo complex secondary reactions. Escheirmoser s principle (p. 34f) again provides a way out. If one connects both carbon atoms via a metal atom which (i) forms and stabilizes the carbon radicals and (ii) can be easily eliminated, the intermolecular reaction is made intramolecular, and good yields may be obtained. 

---