Nitrile chlorination

Carbon Cha.in Backbone Polymers. These polymers may be represented by (4) and considered derivatives of polyethylene, where n is the degree of polymeriza tion and R is (an alkyl group or) a functional group hydrogen (polyethylene), methyl (polypropylene), carboxyl (poly(acryhc acid)), chlorine (poly(vinyl chloride)), phenyl (polystyrene) hydroxyl (poly(vinyl alcohol)), ester (poly(vinyl acetate)), nitrile (polyacrylonitrile), vinyl (polybutadiene), etc. The functional groups and the molecular weight of the polymers, control thek properties which vary in hydrophobicity, solubiUty characteristics, glass-transition temperature, and crystallinity. 

The cleavage products of several sulfonates are utilized on an industrial scale (Fig. 3). The fusion of aromatic sulfonates with sodium hydroxide [1310-73-2J and other caustic alkalies produces phenohc salts (see Alkylphenols Phenol). Chlorinated aromatics are produced by treatment of an aromatic sulfonate with hydrochloric acid and sodium chlorate [7775-09-9J. Nitriles (qv) (see Supplement) can be produced by reaction of a sulfonate with a cyanide salt. Arenesulfonates can be converted to amines with the use of ammonia. This transformation is also rather facile using mono- and dialkylamines. 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

Butyl phenolic resin is a typical tackifier for solvent-borne polychloroprene adhesives. For these adhesives, rosin esters and coumarone-indene resins can also be used. For nitrile rubber adhesives, hydrogenated rosins and coumarone-indene resins can be used. For particular applications of both polychloroprene and nitrile rubber adhesives, chlorinated rubber can be added. Styrene-butadiene rubber adhesives use rosins, coumarone-indene, pinene-based resins and other aromatic resins. 

Nitrile rubber is compatible with phenol-formaldehyde resins, resorcinol-formaldehyde resins, vinyl chloride resins, alkyd resins, coumarone-indene resins, chlorinated rubber, epoxies and other resins, forming compositions which can be cured providing excellent adhesives of high strength, high oil resistance and high resilience. On the other hand, NBR adhesives are compatible with polar adherends such as fibres, textiles, paper and wood. Specific formulations of NBR adhesives can be found in [12]. 

Cyanides are dangerously toxic materials that can cause instantaneous death. They occur in a number of industrial situations but are commonly associated with plating operations, and sludges and baths from such sources. Cyanide is extremely soluble and many cyanide compounds, when mixed with acid, release deadly hydrogen cyanide gas. Cyanide is sometimes formed during the combustion of various nitrile, cyanohydrin, and methacrylate compounds. Cyanides (CN ) are commonly treated by chlorine oxidation to the less toxic cyanate (CNO ) form, then acid hydrolyzed to COj and N. Obviously, care should be taken that the cyanide oxidation is complete prior to acid hydrolysis of the cyanate. 

Carbon-nitrogen multiple bonds in fluorinated imines and nitriles react with halogen fluoride reagents Imines provide 7V-chloroamine.s on reaction with chlo rme fluoride [62, 121, 122, 123] (equations 23 and 24) or with cesium fluoride and chlorine [124] and A -bromoammes on reaction with cesium fluoride and bromine (equation 24)... 

With nitriles, products from addition of one or two equivalents of halogen fluoride can be obtained [725, 726, 127, 128] (equations 25 and 26) on reaction with chlorine fluoride or bromine and an alkali metal fluoride. 

Replacement of hydrogen with halogen can be carried out in the alpha position of fluorinated ethers, amines, aldehydes, or nitriles In 2,2,3,4,4,4 hexafluoro-bulyl methyl ether, chlorination occurs predominantly at the methyl, however, bromination occurs mostly at the internal position of the fluorobutyl group 133] (equation 20)... 

Further, d-citronellal, the corresponding aldehyde, may be converted into citronellic acid through its oxime and nitrile. Citronellic acid, when treated with thionyl chloride in benzene solution, yields a chloride of a chlorinated acid which is converted by the action of alcohol into the hydrochloride of ethyl citronellate, or hydrochloride of ethyl rhodinate,... 

Plasticization Polycaprolactone, polyurethanes, nitrile rubber, ethylene-vinyl acetate, copolyester, chlorinated polyoxymethylenes (acetals)... 

Pandey et al. have used ultrasonic velocity measurement to study compatibility of EPDM and acrylonitrile-butadiene rubber (NBR) blends at various blend ratios and in the presence of compa-tibilizers, namely chloro-sulfonated polyethylene (CSM) and chlorinated polyethylene (CM) [22]. They used an ultrasonic interferometer to measure sound velocity in solutions of the mbbers and then-blends. A plot of ultrasonic velocity versus composition of the blends is given in Eigure 11.1. Whereas the solution of the neat blends exhibits a wavy curve (with rise and fall), the curves for blends with compatibihzers (CSM and CM) are hnear. They resemble the curves for free energy change versus composition, where sinusoidal curves in the middle represent immiscibility and upper and lower curves stand for miscibihty. Similar curves are obtained for solutions containing 2 and 5 wt% of the blends. These results were confirmed by measurements with atomic force microscopy (AEM) and dynamic mechanical analysis as shown in Eigures 11.2 and 11.3. Substantial earher work on binary and ternary blends, particularly using EPDM and nitrile mbber, has been reported. 

---