Nitrile-rubber-modified solid epoxies

Earlier, McKown (43) had shown that nitrile-rubber modified type solid epoxies (EEW 900) could be prepared and applied succes-... 

One can rationalize a need for small rubber inclusions in some of the newer approaches to waterborne and high solids epoxy coating systems. Water-thinned epoxy coating compositions are described (48) where the two-component system consists of a nitrile rubber modified epoxy resin in the epoxide component and a styrene/ butadiene/methylmethacrylate latex modifier for an emulsion-based polyamide hardener component. Showing improved adhesion, impact and water resistance, the paint has good wetting characteristics and can be formulated to a high solids content at low viscosity. 

Lewis and co-workers (42) developed improved powder coatings with nitrile rubber-modification of an appropriate epoxy base (solid resin admixture) cured with an imidazoline-accelerated modified phenolic type hardener. Model coatings ground to 55 pm particle size, electrostatically applied to metals, cured 10 170°C, gave excellent therraocycling results as well as retained resistance to solvent attack. Elastomer-modified epoxy powder coatings have been covered extensively by Gelbel, Romanchick and Sohn in Chapter 5 of this volume. 

Epoxy structural adhesives which employ carboxylic polybutadiene/acrylonitrile solid and liquid (CTBN) elastomers as modifiers have increased in number and proliferated in use since their introduction in the mid- 60 s. Such adhesive systems are now used in aircraft, electronics, automotive and industrial bonding operations. In the mid- 70 s, amine-reactive versions of the liquid polymers (ATBN) were issued, thereby offering another way to introduce rubber modification into a cured epoxy network. References are cited which provide detailed discussions of nitrile rubber, carboxylic nitrile rubber and both carboxyl- and amine-terminated nitrile liquid polymers (1-4). ... 

Carboxylic nitrile liquid and solid elastomers are used to prepare elastomer-modified epoxy liquid and solid resins when it is desirable to have the modifier in the epoxy portion of the system. This is effected through alkyl-hydroxy esterification reactions. This is covered in the literature for uncatalyzed liquid resins (9), for tert-amine catalyzed systems (10), for tert-phosphine catalyzed systems (11), for low molecular weight solid resins advanced from the liquid state (12) and for liquid and solid resins where an additional rubber vulcanization step is carried out in addition to the alkylhydroxy ester adducting step (13). Such adduct preparations offer formulation stability with a wide range of hardener types amines, anhydrides, catalytic, Lewis acids/bases. 

---

See also in sourсe #XX -- [ ]

---