Nickel-pyridine

Transition Metal-Ligand Complex Formation - Nickel-Pyridine Complexes... 

Nickel-bpy and nickel-pyridine catalytic systems have been applied to numerous electroreductive reactions,202 such as synthesis of ketones by heterocoupling of acyl and benzyl halides,210,213 addition of aryl bromides to activated alkenes,212,214 synthesis of conjugated dienes, unsaturated esters, ketones, and nitriles by homo- and cross-coupling involving alkenyl halides,215 reductive polymerization of aromatic and heteroaromatic dibromides,216-221 or cleavage of the C-0 bond in allyl ethers.222... 

Ordinary hydromagncsialion may be effected by the use of a nickel-pyridine complex like Ni(py)4Ch. even though it affords a mixture of rcgioisomcrie allylmagnesium reagents as determined by carboxylalion. giving two kinds of carboxylic acids (eq. 3.37) (5(). An alkoxybntadicne underwent the alkylation as well... 

Tetrahydrofurfuryl alcohol reacts with ammonia to give a variety of nitrogen containing compounds depending on the conditions employed. Over a barium hydroxide-promoted skeletal nickel—aluminum catalyst, 2-tetrahydrofurfur5iarnine [4795-29-3] is produced (113—115). With paHadium on alumina catalyst in the vapor phase (250—300°C), pyridine [110-86-1] is the principal product (116—117) pyridine also is formed using Zn and Cr based catalysts (118,119). At low pressure and 200°C over a reduced nickel catalyst, piperidine is obtained in good yield (120,121). 

Reactions with Ammonia and Amines. Acetaldehyde readily adds ammonia to form acetaldehyde—ammonia. Diethyl amine [109-87-7] is obtained when acetaldehyde is added to a saturated aqueous or alcohoHc solution of ammonia and the mixture is heated to 50—75°C in the presence of a nickel catalyst and hydrogen at 1.2 MPa (12 atm). Pyridine [110-86-1] and pyridine derivatives are made from paraldehyde and aqueous ammonia in the presence of a catalyst at elevated temperatures (62) acetaldehyde may also be used but the yields of pyridine are generally lower than when paraldehyde is the starting material. The vapor-phase reaction of formaldehyde, acetaldehyde, and ammonia at 360°C over oxide catalyst was studied a 49% yield of pyridine and picolines was obtained using an activated siHca—alumina catalyst (63). Brown polymers result when acetaldehyde reacts with ammonia or amines at a pH of 6—7 and temperature of 3—25°C (64). Primary amines and acetaldehyde condense to give Schiff bases CH2CH=NR. The Schiff base reverts to the starting materials in the presence of acids. 

Nickel halide complexes with amines give mixtures of linear polymer and cychc trimers (30). Nickel chelates give up to 40% of linear polymer (31). When heated with ammonia over cadmium calcium phosphate catalysts, propargyl alcohol gives a mixture of pyridines (32). 

The alkylation of pyridine [110-86-1] takes place through nucleophiUc or homolytic substitution because the TT-electron-deficient pyridine nucleus does not allow electrophiUc substitution, eg, Friedel-Crafts alkylation. NucleophiUc substitution, which occurs with alkah or alkaline metal compounds, and free-radical processes are not attractive for commercial appHcations. Commercially, catalytic alkylation processes via homolytic substitution of pyridine rings are important. The catalysts effective for this reaction include boron phosphate, alumina, siHca—alurnina, and Raney nickel (122). 

Reduction. Quinoline may be reduced rather selectively, depending on the reaction conditions. Raney nickel at 70—100°C and 6—7 MPa (60—70 atm) results in a 70% yield of 1,2,3,4-tetrahydroquinoline (32). Temperatures of 210—270°C produce only a slightly lower yield of decahydroquinoline [2051-28-7]. Catalytic reduction with platinum oxide in strongly acidic solution at ambient temperature and moderate pressure also gives a 70% yield of 5,6,7,8-tetrahydroquinoline [10500-57-9] (33). Further reduction of this material with sodium—ethanol produces 90% of /ra/ j -decahydroquinoline [767-92-0] (34). Reductions of the quinoline heterocycHc ring accompanied by alkylation have been reported (35). Yields vary widely sodium borohydride—acetic acid gives 17% of l,2,3,4-tetrahydro-l-(trifluoromethyl)quinoline [57928-03-7] and 79% of 1,2,3,4-tetrahydro-l-isopropylquinoline [21863-25-2]. This latter compound is obtained in the presence of acetone the use of cyanoborohydride reduces the pyridine ring without alkylation. 

Organic amines, eg, pyridine and piperidine, have also been used successfully as catalysts in the reactions of organosilanes with alcohols and silanols. The reactions of organosilanes with organosilanols lead to formation of siloxane bonds. Nickel, zinc, and tin also exhibit a catalytic effect. 

The Perkin reaction is of importance for the iadustrial production of coumarin and a number of modifications have been studied to improve it, such as addition of a trace of iodine (46) addition of oxides or salts of metals such as iron, nickel, manganese, or cobalt (47) addition of catalytic amounts of pyridine (48) or piperidine (49) replacement of sodium acetate by potassium carbonate (50,51) or by cesium acetate (52) and use of alkaU metal biacetate... 

Specifications, Analysis, and Toxicity. Dicyandiamide is identified quaHtatively by paper chromatography and quantitatively by ultraviolet spectrometry of the chromatogram. More commonly, total nitrogen analysis is used as a purity control or the dicyandiamide is converted by hydrolysis to guanylurea, which is determined gravimetrically as the nickel salt (50). Methods based on the precipitation of silver dicyandiamide picrate are sometimes used (51). Dicyandiamide can also be titrated with tetrabutylammonium hydroxide ia pyridine solution. Table 4 gives a typical analysis of a commercial sample. Dicyandiamide is essentially nontoxic. It may, however, cause dermatitis. 

Pyrazolopyridines isomeric to those described previously have been obtained by other methods. Thus, the derivative (558) was formed by Raney nickel reduction of the 4-nitrosopyrazole (557) (7UHC1035), and the pyrazolo[3,4-c]pyridine derivative (560) was prepared from the azide (559) (79CC627). 

Chloro-a,/3-unsaturated aldehydes condense with ammonium thiocyanate to give isothiazoles (76EGP122249). 2,3-Diphenylcyclopropenone reacts with iV-sulfinyl-cyclohexylamine in the presence of nickel tetracarbonyl to give the isothiazolin-3-one 1-oxide (197) (79SST(5)345). Cholesteryl acetate reacts with trithiazyl trichloride in pyridine to give the isothiazolo steroid (198) (77JCS(P1)916). 

Cyclodecanediol has been prepared by the hydrogenation of sebacoin in the presence of Raney nickel or platinum, by the reduction of sebacoin with aluminum isopropoxide or lithium aluminum hydride, and by the oxidation of cyclodecene with osmium tetroxide and pyridine. ... 

Dimethyl ketals and enol ethers are stable to the conditions of oxime formation (hydroxylamine acetate or hydroxylamine hydrochloride-pyridine). Thioketals and hemithioketals are cleaved to the parent ketones by cadmium carbonate and mercuric chloride. Desulfurization of thioketals with Raney nickel leads to the corresponding methylene compounds, while thioenol ethers give the corresponding olefin. In contrast, desulfurization of hemithioketals regenerates the parent ketone. ... 

The azidohydrins obtained by azide ion opening of epoxides, except for those possessing a tertiary hydroxy group, can be readily converted to azido mesylates on treatment with pyridine/methanesulfonyl chloride. Reduction and subsequent aziridine formation results upon reaction with hydrazine/ Raney nickel, lithium aluminum hydride, or sodium borohydride/cobalt(II)... 

Monomer-oligomer equilibria. [Ni(Me-sal)2], mentioned above as a typical planar complex, is a much studied compound. In pyridine it is converted to the octahedral bispyridine adduct (/zsoo = 3.1 BM), while in chloroform or benzene the value of is intermediate but increases with concentration. This is ascribed to an equilibrium between the diamagnetic monomer and a paramagnetic dimer, which must involve a coordination number of the nickel of at least 5 a similar explanation is acceptable also for the paramagnetism of the solid when heated above 180°C. The trimerization of Ni(acac)2 to attain octahedral coordination has already been referred to but it may also be noted that it is reported to be monomeric and planar in dilute chloroform solutions. 

The reaction of 3-amino-4-cyanofurazan with (3-dicarbonyl compounds in the presence of catalytic amounts of nickel acetylacetonate (Ni(acac)2) gave labile enamines that on treatment with acetic acid afforded fused pyridines of type 100 in 80-95% total yields (Scheme 51) (94MC57). Eurther syntheses of furazano-pyridines can be found in the review by Sheremetev (99RCR137, 99UK154). 

In 1956 it was found that when pyridine is refluxed with a modified Raney-nickel catalyst, 2,2 -bipyridine (1) is formed in satisfactory yield. The isomeric bipyridines could not be detected, and the product was readily purified. Similar heterocyclic biaryls have been formed in the same way from substituted pyridines and from some related compounds, the yield being dependent on the nature of the compound. The reaction has become the method of choice for the preparation of 2,2 -bipyridine, and it is now used on an industrial scale. Bipyridyls are of particular importance as chelating agents. 

The formation of trace amounts of 2,2 -bipyridine following reaction between pyridine and ammonia in the presence of a variety of catalysts led Wibaut and Willink to develop a method for the preparation of 2,2 -bipyridine from pyridine under the influence of a nickel-alumina catalyst. Using a pyridine-to-catalyst ratio of 10 1, temperatures between 320° and 325°C, and pressures between 42 and 44 atm, 2,2 -bipyridine was formed in yields of 0.30-0.67 gm per gram of catalyst. This method w as later applied to -picoline, to quino-line, - and to some of its derivatives, ... 

In addition to the Raney nickel catalysts, Raney catalysts derived from iron, cobalt, and copper have been examined for their action on pyridine. At the boiling point of pyridine, degassed Raney iron gave only a very small yield of 2,2 -bipyridine but the activity of iron in this reaction is doubtful as the catalyst was subsequently found to contain 1.44% of nickel. Traces of 2,2 -bipyridine (detected spectroscopically) were formed from pyridine and a degassed, Raney cobalt catalyst but several Raney copper catalysts failed to produce detectable quantities of 2,2 -bipyridine following heating with pyridine. 

Reaction of -picoline with a nickel-alumina catalyst has been reported to give a mixture of four isomeric dimethylbipyridines, one of which has been identified at 6,6 -dimethyl-2,2 -bipyridine. With palladium-on-carbon, 2,4-lutidine was found to be more reactive than pyridine,and the isolated biaryl has been assigned the structure (2). However, some confusion arises from the statement that this... 

The Preparation of Substituted 2,2 -Bipyridines from Substituted Pyridines and Degassed Raney Nickel -i ... 

Several substituted pyridines have been examined using the degassed Raney nickel, and the results are summarized in Table I. As all the biaryls obtained formed colored chelates with either ferrous or cuprous ions, they must be derivatives of 2,2 -bipyridine. Structural ambiguities cannot arise with 2,2 -bipyridines derived from 2- and 4-substituted pyridines but 3-substituted pyridines could conceivably give three isomeric 2,2 -bipyridines (e.g., 3, 4, 5). In fact, however, each 3-substituted pyridine so far examined has given only one 2,2 -bipyridine. 

Reaction of -picoline over degassed Raney nickel was found to give 5,5 -dimethyl-2,2 -bipyridine (5), the structure of which was established by its synthesis from 2-bromo-5-methylpyridine. Oxidation of this dimethyl-2,2 -bipyridine, and similar oxidation of the diethyl-2,2 -bipyridine derived from 3-ethylpyridinc, gave the corresponding dicarboxylic acid and the same acid was produced by the action of degassed Raney nickel on sodium nicotinate (in water) or on ethyl nicotinate. These transformations established the 5,5 -substitution pattern for three 2,2 -bipyridines derived from 3-substituted pyridines but such evidence is not available for the biaryls... 

Inspection of Table I shows that the yields of 2,2 -bipyridines obtainable from a substituted pyridine in the reaction with degassed Raney nickel depend on the nature of the substituents and their positions in the ring. 

Most of the reactions with quinolines and degassed Raney nickels have been carried out at the atmospheric boiling point (above 230 C), a condition which is known to favor the formation of by-products. With quinoline and 4-methylquinoline (lepidine), however, the yields of the 2,2 -biquinolines were increased three to four times by heating in vacuo at 150° C, and it seems probable that other quinolines will behave similarly. Table II also shows that the yields of 2,2 -biquino-lines obtained under comparable conditions vary with the position of the methyl group in a fashion reminiscent of the trends observed with the pyridines (Table I). This similarity extends to the behavior of the two 2-methyl substituted quinolines studied, which undergo loss of the 2-methyl group to some extent and form traces of 2,2 -biquinolines. 

---