Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Naval Surface Warfare Center

To describe procedures adequately, it is occasionally helpful to identify commercial products and equipment. In no case does such identification imply Naval Surface Warfare Center recommendation or endorsement, nor does it imply that the item is necessarily the best available for the purpose. [Pg.220]

RUTH M. DOHERTY, Naval Surface Warfare Center, Indian Head, Maryland WILLARD C. GEKLER, ABS Consulting/PLG (retired), Irvine, California SHELDON E. ISAKOFF, E.I. du Pont de Nemours and Company (retired), Chadds Ford, Pennsylvania... [Pg.5]

Naval Surface Warfare Center Panama City... [Pg.318]

Figure 3.12 Transparent anvil drop weight apparatus. Reprinted with permission from Field, J.E., Swallowe, C.M., Palmer, S.J.P., Pope, P.H., and Sundarajan, R. (1985) Proc. 8th Symp. (Inti) on Detonation 1985, Naval Surface Warfare Center, USA. Figure 3.12 Transparent anvil drop weight apparatus. Reprinted with permission from Field, J.E., Swallowe, C.M., Palmer, S.J.P., Pope, P.H., and Sundarajan, R. (1985) Proc. 8th Symp. (Inti) on Detonation 1985, Naval Surface Warfare Center, USA.
Naval Surface Warfare Center, Dahlgren, Virginia (1992) US Technical Report, Impact Testing of Explosives and Propellants . NSWC DD/TR-92/280. [Pg.207]

Kirk E. Newman, Naval Surface Warfare Center William R. Rhyne, H R Technical Associates, Inc. [Pg.10]

Naval Surface Warfare Center, Carderock Division, Annapolis, MD 21402 USA... [Pg.197]

The research at Oklahoma State University was sponsored by the National Science Foundation (Grant RII-8610676) and the Naval Surface Warfare Center (Grants N60921-84-M-2714, N60921-85-M-4286 and N60921-85-M-7416). [Pg.180]

M. J. Kamlet and H. G. Adolph, Proc. Seventh Symposium (International) on Detonations, Naval Surface Warfare Center, Silver Springs, MD, Report NSWCMP-82-334, 1981, p. 84. [Pg.360]

The most well-known SMA, which exhibits superelasticity above its transformation temperature, is NiTi ( 51% Ni by weight), also known by its trade name, nitinol, for nickel-titanium-naval ordnance laboratory. This alloy was developed in 1959 by William J. Buehler (b. 1923) at the United States Naval Ordnance Laboratory, now the Naval Surface Warfare Center, in White Oak, Maryland. Buehler was looking for a new impact-resistant alloy to serve as the nose cone for a new missile. The alloy s superelastic properties were discovered in 1962 by Frederick E. Wang (b. 1932), whom Buehler hired. The very first observation of superelasticity was by the University of Stockholm chemistry professor Arne Olander, who discovered a rubber-hke effect in an Au-Cd alloy (47.5% Au) in 1932 (Olander, 1932). [Pg.433]

Polymer Physics Group, Naval Surface Warfare Center, Silver Spring, MD 20903—5000... [Pg.23]

My sincere thanks and appreciation also to the following people who reviewed the manuscripts and provided many excellent comments and improvements John L. Montoya (Sandia National Laboratories), Dr. Gerald Laib (Naval Surface Warfare Center White Oak), Dr. James E. Kennedy (Los Alamos National Laboratory), Dr. Carl-Otto Lieber (Bundesinstitut fur Chemisch-Techn-ische, BICT, Germany), Dr. Hugh R. James (Atomic Weapons Establishment, England), Dr. Pascal A. Bauer (Professor, Ecole Nationale Superieure de Meca-nique et d Aerotechnique, Paris, France), Dr. Eric J. Rinehart (Field Command, U.S. Defense Nuclear Agency). Mr. J. Christopher Ronay (Institute of Makers of Explosives), and Dr. Ronald Varosh (Reynolds Industries Systems, Inc.). [Pg.470]

Buechler, A., Sims, C.W., 1996, Liquid-Flow-Through Module/ Cardcage Thermal and Environmental Test Report (NSWC-6043-AECS-5), Naval Surface Warfare Center, Crane Division. [Pg.497]

Joint Expeditionary Forensics Program, Naval Surface Warfare Center Dahlgren, Asymmetric Operations Technology Branch (Z11), Dahlgren, VA 22448 - 5160, USA... [Pg.510]

CAS 106602-80-6. A torpedo fuel that is easy to handle, has a non-explosive classification and a low fire hazard. Developed by Otto Reitlinger at the Indian Head Division Naval Surface Warfare Center during the 1960s. [Pg.932]

Ballard Generating System s first field trial 250 KW Natural gas Polymer, Electrolyte Membrane (PEM) Fuel Cell Power Generator is sited at the Crane Naval Surface Warfare Center, in Indiana, for a two-year demonstration and testing program. This system would be smaller and simpler if it were... [Pg.121]

Public concerns in the United States about using the CDC to treat chemical munitions are not known at this time. However, the extensive U.S. use of the CDC for destruction of conventional munitions, including at the Naval Surface Warfare Center (Bixler, 2005), the Massachusetts Military Reservation, and the Blue Grass Chemical Depot, may contribute to public acceptance. The operations at Blue Grass were conducted under a RCRA permit.14 The experience with conventional munitions seems to demonstrate that the CDC can be operated without noise or vibration problems for its neighbors. [Pg.54]

This research was supported by a contract from the Office of Naval Research (N00014-87-0047), a contract from the Naval Surface Warfare Center (N60921-91-M-G761), and a research stimulation fund from Wayne State University. The author also thanks his collaborators, Janos Lanyi, Lowell McCoy, Mauricio Mental, and Richard Needleman. The experimental work that forms the basis of this chapter was performed by Man Chang, Albert Duschle, Brian Fuller, Filbert Hong, Sherie Michaile, Baofu Ni, Ting Okajima, and Michelle Petrak. [Pg.286]

Enzymatic reactions have been tested in SCFs on a pilot plant scale, and a detailed analysis of potential technical solutions and costs is given in Chapter 4.9. Finally, the synthesis of energetic materials has been suggested to be performed in liquid or supercritical CO2. The Indian Head Division of the US Naval Surface Warfare Center is now constructing a pilot plant with a 100 L vessel for the synthesis of such energetics as MTV (magnesium/Teflon/ Viton) and poly-3-nitratoraethy 1-3-methyl oxetane [190,191]. [Pg.30]

The authors acknowledge the provision of friction stir processed materials and data on monotonic and cyclic behavior of the NiAl bronze by M.W. Mahoney and C.B. Fuller, Rockwell Scientific Corporation. The Naval Surface Warfare Center (Carderock, MD) supplied the NiAl bronze materials, and the Defense Advanced Research Projects Agency (DARPA), with Dr. L. Christodolou as program sponsor, provided the funding for this work. [Pg.169]

Chapter 8 in this volume presents FSP of copper alloys, including NiAl bronze, an alloy frequently used to fabricate ship propellers. Data in Chapter 8 show mechanical and fatigue properties to be improved considerably by FSP. However, as shown previously for an aluminum alloy, the need may arise to friction stir process a prior-fusion repair within an NiAl bronze propeller. Thus, studies were initiated to evaluate procedures and properties for this unique combination of prior processing. Fusion welds were made at the Naval Surface Warfare Center, Carderock Division, using standard Navy weld procedures for NiAl bronze. Figure 14.43 illustrates a multipass 12.7 mm (0.5 in.) penetration fusion weld using Ampcotrode 46 weld wire of composition... [Pg.336]

Use of a D-200 model to destroy multiple eonven-tional munitions at Crane Naval Surface Warfare Center in Indiana and... [Pg.55]


See other pages where Naval Surface Warfare Center is mentioned: [Pg.219]    [Pg.20]    [Pg.172]    [Pg.170]    [Pg.339]    [Pg.406]    [Pg.446]    [Pg.494]    [Pg.94]    [Pg.121]    [Pg.456]    [Pg.78]    [Pg.97]    [Pg.77]   
See also in sourсe #XX -- [ Pg.23 , Pg.49 , Pg.229 , Pg.248 , Pg.281 ]




SEARCH



Carderock Division, Naval Surface Warfare Center

Naval

Naval warfare

© 2024 chempedia.info