Molybdic acid, molybdates

Phosphorus. The presence of phosphorus may be indicated by a smell of phosphine during the sodium fusion. Treat 1 ml. of the fusion solution with 3 ml. of eoneentrated nitric acid and boil for one minute. Cool and add an equal volume of ammonium molybdate reagent. Warm the mixture to 40-50°, and allow to stand. If phosphorus is present, a yellow erystalline precipitate of ammonium phosphomolybdate wUl separate. 

It is usually preferable to oxidise the compound directly as follows. Intimately mix 0 02-0 05 g. of the eompound with 3 g. of sodium peroxide and 2 g. of anhydrous sodium carbonate in a niekel erucible. Heat the crueible and its eontents with a small flame, gently at first, afterwards more strongly until the eontents are fused, and eontinue heating for a further 10 minutes. Allow to stand, extract the contents of the crucible with water, and filter. Add exeess of eoneentrated nitrie acid to the filtrate and test with ammonium molybdate reagent as above. A yellow preeipitate indicates the presenee of phosphorus. It must be borne in mind that the above treatment 1 eonvert any arsenie present into arsenate. 

Acetylacetone, ascorbic acid, citrate, C20j, EDTA, F , H2O2, hydrazine, mannitol, NagP30io, NH2OH HCI, oxidation to molybdate, 8CN , tartrate, tiron, triphosphate... 

Sonnenschein s reagent (alkaloid detection) a nitric acid solution of ammonium molybdate is treated with phosphoric acid. The precipitate so produced is washed and boiled with aqua regia... 

In 1957 Standard Oil of Ohio (Sohio) discovered bismuth molybdate catalysts capable of producing high yields of acrolein at high propylene conversions (>90%) and at low pressures (12). Over the next 30 years much industrial and academic research and development was devoted to improving these catalysts, which are used in the production processes for acrolein, acryUc acid, and acrylonitrile. AH commercial acrolein manufacturing processes known today are based on propylene oxidation and use bismuth molybdate based catalysts. 

Early catalysts for acrolein synthesis were based on cuprous oxide and other heavy metal oxides deposited on inert siHca or alumina supports (39). Later, catalysts more selective for the oxidation of propylene to acrolein and acrolein to acryHc acid were prepared from bismuth, cobalt, kon, nickel, tin salts, and molybdic, molybdic phosphoric, and molybdic siHcic acids. Preferred second-stage catalysts generally are complex oxides containing molybdenum and vanadium. Other components, such as tungsten, copper, tellurium, and arsenic oxides, have been incorporated to increase low temperature activity and productivity (39,45,46). 

The total phosphoms content of the sample is determined by method AOCS Ja 5-55. Analysis of phosphoUpid in lecithin concentrates (AOCS Ja 7-86) is performed by fractionation with two-dimensional thin-layer chromatography (tic) followed by acid digestion and reaction with molybdate to measure total phosphorous for each fraction at 310 nm. It is a semiquantitative method for PC, PE, PI, PA, LPC, and LPE. Method AOCS Ja 7b-91 is for the direct deterrnination of single phosphoHpids PE, PA, PI, PC in lecithin by high performance Hquid chromatography (hplc). The method is appHcable to oil-containing lecithins, deoiled lecithins, lecithin fractions, but not appHcable to lyso-PC and lyso-PE. 

Oxidation. Maleic and fumaric acids are oxidized in aqueous solution by ozone [10028-15-6] (qv) (85). Products of the reaction include glyoxyhc acid [298-12-4], oxalic acid [144-62-7], and formic acid [64-18-6], Catalytic oxidation of aqueous maleic acid occurs with hydrogen peroxide [7722-84-1] in the presence of sodium tungstate(VI) [13472-45-2] (86) and sodium molybdate(VI) [7631-95-0] (87). Both catalyst systems avoid formation of tartaric acid [133-37-9] and produce i j -epoxysuccinic acid [16533-72-5] at pH values above 5. The reaction of maleic anhydride and hydrogen peroxide in an inert solvent (methylene chloride [75-09-2]) gives permaleic acid [4565-24-6], HOOC—CH=CH—CO H (88) which is useful in Baeyer-ViUiger reactions. Both maleate and fumarate [142-42-7] are hydroxylated to tartaric acid using an osmium tetroxide [20816-12-0]/io 2LX.e [15454-31 -6] catalyst system (89). 

Molybdenite concentrate contains about 90% M0S2. The remainder is primarily siUca, with lesser amounts of Fe, Al, and Cu. The concentrate is roasted to convert the sulfide to technical molybdic oxide. Molybdenum is added to steel in the form of this oxide. In modem molybdenum conversion plants, the oxidized sulfur formed by roasting M0S2 is converted to sulfuric acid. 

The reduction of molybdate salts in acidic solutions leads to the formation of the molybdenum blues (9). Reductants include dithionite, staimous ion, hydrazine, and ascorbate. The molybdenum blues are mixed-valence compounds where the blue color presumably arises from the intervalence Mo(V) — Mo(VI) electronic transition. These can be viewed as intermediate members of the class of mixed oxy hydroxides the end members of which are Mo(VI)02 and Mo(V)0(OH)2 [27845-91-6]. MoO and Mo(VI) solutions have been used as effective detectors of reductants because formation of the blue color can be monitored spectrophotometrically. The nonprotonic oxides of average oxidation state between V and VI are the molybdenum bronzes, known for their metallic luster and used in the formulation of bronze paints (see Paint). 

The tris (dithiolene) complexes of Mo can be formed by reaction of the corresponding dithiol and molybdate in acid solution. The intense green... 

Soil Nutrient. Molybdenum has been widely used to increase crop productivity in many soils woddwide (see Fertilizers). It is the heaviest element needed for plant productivity and stimulates both nitrogen fixation and nitrate reduction (51,52). The effects are particularly significant in leguminous crops, where symbiotic bacteria responsible for nitrogen fixation provide the principal nitrogen input to the plant. Molybdenum deficiency is usually more prominent in acidic soils, where Mo(VI) is less soluble and more easily reduced to insoluble, and hence unavailable, forms. Above pH 7, the soluble anionic, and hence available, molybdate ion is the principal species. 

Biomedical Uses. The molybdate ion is added to total parenteral nutrition protocols and appears to alleviate toxicity of some of the amino acid components in these preparations (see Mineral NUTRIENTS) (97). Molybdenum supplements have been shown to reduce iiitrosarnine-induced mammary carcinomas in rats (50). A number of studies have shown that certain heteropolymolybdates (98) and organometaUic molybdenum compounds (99) have antiviral, including anti-AIDS, and antitumor activity (see Antiviral agents Chemotherapeutics, anticancer). 

In this process, catalysts, such as boric acid, molybdenum oxide, zirconium, and titanium tetrachloride or ammonium molybdate, are used to accelerate the reaction. The synthesis is either carried out in a solvent (aUphatic hydrocarbon, trichlorobenzene, quinoline, pyridine, glycols, or alcohols) at approximately 200°C or without a solvent at 300°C (51,52). 

In the calciaation process, a mixture of corresponding oxides and an optional modifier, eg, molybdic acid, are milled together to achieve a homogenous mixture. The mixture is calciaed at 750—950°C and milled to a desired particle size. Wet milling ia an alkaline medium is recommended to remove any unreacted vanadium salts that ate beheved to degrade the pigmentary properties of bismuth vanadate (39). 

Polarimetric analysis of sorbitol and mannitol in the presence of each other and of sugars is possible because of their enhanced optical rotation when molybdate complexes are formed and the higher rotation of the mannitol molybdate complex under conditions of low acidity (194). The concentration of a pure solution of sorbitol may be determined by means of the refractometer (195). Mass spectra of trimethylsilyl ethers of sugar alcohols provide unambiguous identification of tetritols, pentitols, and hexitols and permit determination of molecular weight (196). 

When the Claus reaction is carried out in aqueous solution, the chemistry is complex and involves polythionic acid intermediates (105,211). A modification of the Claus process (by Shell) uses hydrogen or a mixture of hydrogen and carbon monoxide to reduce sulfur dioxide, carbonyl sulfide, carbon disulfide, and sulfur mixtures that occur in Claus process off-gases to hydrogen sulfide over a cobalt molybdate catalyst at ca 300°C (230). 

Phosphate. Phosphoms occurs in water primarily as a result of natural weathering, municipal sewage, and agricultural mnoff The most common form in water is the phosphate ion. A sample containing phosphate can react with ammonium molybdate to form molybdophosphoric acid (H2P(Mo202q)4). This compound is reduced with stannous chloride in sulfuric acid to form a colored molybdenum-blue complex, which can be measured colorimetrically. SiUca and arsenic are the chief interferences. 

Silica. The siUca content of natural waters is usually 10 to (5 x lO " ) M. Its presence is considered undesirable for some industrial purposes because of the formation of siUca and siUcate scales. The heteropoly-blue method is used for the measurement of siUca. The sample reacts with ammonium molybdate at pH 1.2, and oxaUc acid is added to reduce any molybdophosphoric acid produced. The yellow molybdosiUcic acid is then reduced with l-amino-2-naphthol-4-sulfoiiic acid and sodium sulfite to heteropoly blue. Color, turbidity, sulfide, and large amounts of iron are possible interferences. A digestion step involving NaHCO can be used to convert any molybdate-unreactive siUca to the reactive form. SiUca can also be deterrnined by atomic... 

The catalysts are prepared by impregnating the support with aqueous salts of molybdenum and the promoter. In acidic solutions, molybdate ions are present largely in the form of heptamers, [Mo2024] , and the resulting surface species are beHeved to be present in islands, perhaps containing only seven Mo ions (100). Before use, the catalyst is treated with H2 and some sulfur-containing compounds, and the surface oxides are converted into the sulfides that are the catalyticaHy active species. 

These enable temperature control with built-in exchangers between the beds or with pumparound exchangers. Converters for ammonia, 80.3, cumene, and other processes may employ as many as five or six beds in series. The Sohio process for vapor-phase oxidation of propylene to acrylic acid uses hvo beds of bismuth molybdate at 20 to 30 atm (294 to 441 psi) and 290 to 400°C (554 to 752°F). Oxidation of ethylene to ethylene oxide also is done in two stages with supported... 

Sensitivity of the proposed method correlates with molai absorptivity of the cyanine dye. Mixed POMs PMeMo O j (Me=TP+, Sb +, BP+) were chosen as analytical form because of its higher stability as compared with 12-molybdophosphate. Only 2-3T0 concentration of molybdate is enough for complete formation of POM avoiding in this way formation of lA with polymolybdate ions. In addition, mixed POMs are stable in wider interval of pH. Increasing of anion chai ge from 3 to 5(6) is also favorable. Constant absorbance of lA is observed in the acidity range of 0.12-0.28 M. 

Phosphorus and Silicon in Waters, Effluents and Sludges [e.g. Phosphorus in Waters, Effluents and Sludges by Spectrophotometry-phosphomolybdenum blue method. Phosphorus in Waters and Acidic Digests by Spectrophotometry-phosphovanadomolybdate method. Ion Chromatographic Methods for the Determination of Phosphorus Compound, Pretreatment Methods for Phosphorus Determinations, Determination of silicon by Spectrophotometric Determination of Molybdate Reactive Silicon-1 -amino-2-naphthol-4, sulphonic acid (ANSA) or Metol reduction methods or ascorbic acid reduction method. Pretreatment Methods to Convert Other Eorms of Silicon to Soluble Molybdate Reactive Silicon, Determination of Phosphorus and Silicon Emission Spectrophotometry], 1992... 

---