Molecular aromatic hydrocarbons

Burdett, R.A., L.W. Taylor and L.C. Jones Jr (1955), Determination of aromatic hydrocarbons in lubricating oil fractions by far UV absorption spectroscopy , p. 30. In Molecular Spectroscopy Report Conf. Institute of Petroleum, London. 

Unlike aliphatic hydrocarbons, aromatic hydrocarbons can be sul-phonated and nitrated they also form characteristic molecular compounds with picric acid, styphnic acid and 1 3 5-trinitrobenzene. Many of the reactions of aromatic hydrocarbons will be evident from the following discussion of crystalline derivatives suitable for their characterisation. 

Picrates, Many aromatic hydrocarbons (and other classes of organic compounds) form molecular compounds with picric acid, for example, naphthalene picrate CioHg.CgH2(N02)30H. Some picrates, e.g., anthracene picrate, are so unstable as to be decomposed by many, particularly hydroxylic, solvents they therefore cannot be easily recrystaUised. Their preparation may be accomplished in such non-hydroxylic solvents as chloroform, benzene or ether. The picrates of hydrocarbons can be readily separated into their constituents by warming with dilute ammonia solution and filtering (if the hydrocarbon is a solid) through a moist filter paper. The filtrate contains the picric acid as the ammonium salt, and the hydrocarbon is left on the filter paper. 

The biological properties of dioxin include an ability to bind to a protein known as the AH (aromatic hydrocarbon) receptor Dioxin IS not a hydrocarbon but it shares a certain structural property with aromatic hydrocarbons Try constructing molecular models of dioxin and anthracene to see these similarities... 

Another type of soHd supetacid is based on perfluorinated resin sulfonic acid such as the acid form of Du Font s Nafion resin, a copolymer of a perfluorinated epoxide and vinylsulfonic acid or soHd, high molecular weight petfluotoalkanesulfonic acids such as petfluotodecanesulfonic acid, CF2(CF2)qS02H. Such sohd catalysts have been found efficient in many alkylations of aromatic hydrocarbons (225) and other Friedel-Crafts reactions (226). 

Aromatic Radical Anions. Many aromatic hydrocarbons react with alkaU metals in polar aprotic solvents to form stable solutions of the corresponding radical anions as shown in equation 8 (3,20). These solutions can be analyzed by uv-visible spectroscopy and stored for further use. The unpaired electron is added to the lowest unoccupied molecular orbital of the aromatic hydrocarbon and a... 

Above 100°C, most polyolefins dissolve in various aHphatic and aromatic hydrocarbons and their halogenated derivatives. For example, polybutene dissolves in benzene, toluene, decalin, tetralin, chloroform, and chlorobenzenes. As with other polyolefins, solubiHty of PB depends on temperature, molecular weight, and crystallinity. 

An excess of crotonaldehyde or aUphatic, ahcyhc, and aromatic hydrocarbons and their derivatives is used as a solvent to produce compounds of molecular weights of 1000—5000 (25—28). After removal of unreacted components and solvent, the adduct referred to as polyester is decomposed in acidic media or by pyrolysis (29—36). Proper operation of acidic decomposition can give high yields of pure /n j ,/n7 j -2,4-hexadienoic acid, whereas the pyrolysis gives a mixture of isomers that must be converted to the pure trans,trans form. The thermal decomposition is carried out in the presence of alkaU or amine catalysts. A simultaneous codistillation of the sorbic acid as it forms and the component used as the solvent can simplify the process scheme. The catalyst remains in the reaction batch. Suitable solvents and entraining agents include most inert Hquids that bod at 200—300°C, eg, aUphatic hydrocarbons. When the polyester is spHt thermally at 170—180°C and the sorbic acid is distilled direcdy with the solvent, production and purification can be combined in a single step. The solvent can be reused after removal of the sorbic acid (34). The isomeric mixture can be converted to the thermodynamically more stable trans,trans form in the presence of iodine, alkaU, or sulfuric or hydrochloric acid (37,38). 

Dyes, Dye Intermediates, and Naphthalene. Several thousand different synthetic dyes are known, having a total worldwide consumption of 298 million kg/yr (see Dyes AND dye intermediates). Many dyes contain some form of sulfonate as —SO H, —SO Na, or —SO2NH2. Acid dyes, solvent dyes, basic dyes, disperse dyes, fiber-reactive dyes, and vat dyes can have one or more sulfonic acid groups incorporated into their molecular stmcture. The raw materials used for the manufacture of dyes are mainly aromatic hydrocarbons (67—74) and include ben2ene, toluene, naphthalene, anthracene, pyrene, phenol (qv), pyridine, and carba2ole. Anthraquinone sulfonic acid is an important dye intermediate and is prepared by sulfonation of anthraquinone using sulfur trioxide and sulfuric acid. 

Asphalts characteristically contain very high molecular weight molecular polar species, called asphaltenes, which are soluble in carbon disulfide, pyridine, aromatic hydrocarbons, chlorinated hydrocarbons, and tetrahydrofiiran. 

Pitches can be transformed to a mesophase state by further chemical and physical operations. Heat treatment of conventional pitches results in additional aromatic polymeriza tion and the distillation of low molecular weight components. This results in an increase in size and concentration of large planar aromatic molecular species whereupon the precursor pitch is transformed to a mesophase state exhibiting the characteristics of nematic Hquid crystals (1). Additional heat treatment converts the mesophase pitch to an infusible aromatic hydrocarbon polymer designated as coke. 

Fig. 29. Tack of polychloroprene-aromatic hydrocarbon resin blends (17 wt% resin content) as a function of the molecular weight of the hydrocarbon resin. Tack was obtained as the immediate T-peel strength of joints produced with 0.6 mm thick styrene-butadiene rubber strips placed in contact without application of pressure. Peeling rate = 10 cm/min.

Paradoxically, although they are electron-rich, S-N compounds are good electron acceptors because the lowest unoccupied molecular orbitals (LUMOs) are low-lying relative to those in the analogous carbon systems. For example, the ten r-electron [SsNs] anion undergoes a two-electron electrochemical reduction to form the trianion [SsNs] whereas benzene, the aromatic hydrocarbon analogue of [SsNs], forms the monoanion radical [CeHg] upon reduction. ... 

An antipolymerization agent such as hydroquinone may be added to the reaction mixture to inhibit the polymerization of the maleate or fumarate compound under the reaction conditions. This reaction is preferably carried out at a temperature within the range of 20°C to 150°C. This reaction is preferably carried out at atmospheric pressure. Reaction time of 16 to 24 hours have bean specified for this reaction by J.T. Cassaday. The reaction is preferably carried out in a solvent such as the low molecular weight aliphatic monohydric alcohols, ketones, aliphatic esters, aromatic hydrocarbons or trialkyl phosphates. 

The distribution of the products obtained from this reaction depends upon the reaction temperature (Figure 5.1-4) and differs from those of other poly(ethene) recycling reactions in that aromatics and alkenes are not formed in significant concentrations. Another significant difference is that this ionic liquid reaction occurs at temperatures as low as 90 °C, whereas conventional catalytic reactions require much higher temperatures, typically 300-1000 °C [100]. A patent filed for the Secretary of State for Defence (UK) has reported a similar cracking reaction for lower molecular weight hydrocarbons in chloroaluminate(III) ionic liquids [101]. An... 

Although many of the aromatic compounds based on benzene have pleasant odors, they are usually toxic, and some are carcinogenic. Volatile aromatic hydrocarbons are highly flammable and burn with a luminous, sooty flame. The effects of molecular size (in simple arenes as well as in substituted aromatics) and of molecular symmetry (e.g., xylene isomers) are noticeable in physical properties [48, p. 212 49, p. 375 50, p. 41]. Since the hybrid bonds of benzene rings are as stable as the single bonds in alkanes, aromatic compounds can participate in chemical reactions without disrupting the ring structure. 

For more aromatics yield, the end point of the feed may be raised to include higher molecular weight hydrocarbons in favor of hydrocracking and dehydrocyclization. However, excessive hydrocracking is not desirable because it lowers liquid yields. 

---