Modular constructions

To have a modular construction with a wide choice of module sizes for optimum utilization of the usable area in each vertical panel, which is normally 1800 mm as illustrated in Figure 13,32, The general practice is to have the module sizes in the ratio of 1/6 (300 mm), 1/4 (450 mm), 1/3 (600 mm) and 1/2 (900 mm), etc. Some manufacturers, however, supply 1/8 (225 mm) and 1/9 (200 mm) size of modules when the sizes and number of components for a module are less and can be accommodated in such a small module size. For critical installations, however, such as for a refinery or a petrochemical plant or for the essential services of a powergenerating station or installations that are in humid conditions or are contaminated, it is advisable to have a module size no smaller than 1/6 (300 mm)... 

The innovative features, such as passive, gravity-driven ECCS, simplified RCS, digital I C, optimized plant arrangement, and modular construction methods, characterize the AP600 design. These changes result in fewer systems, equipment, operations, inspections, maintenance, and QA requirements (Table 6.1-7). Features of the AP-6(K) are as follows ... 

Depending upon the required duty and the site, units may be shop assembled or of modular construction. Site-erected units may be designed to have their main components arranged to fit in with the space available. 

Figure 4.1 clearly illustrates the modular construction of MOFs, with ligands used as pillars and metal clusters as node points. One unique feature of MOFs seems to be the possibihty to systematically modify their lattice. For instance, by replacing the terephthalate ligands of MOF-5 (Figure 4.1) with different dicarboxylate ligands, a family of isoreticular metal-organic frameworks (known in literature as the... 

The use of DNA hybridization just described opens up a novel, uncomplicated, yet powerful strategy for supramolecular synthesis Many different devices are connected to a distinct sequence codon and are subsequently organized on a suitable template strand. The utilization of appropriate nucleic acid scaffolds should even allow the fabrication of highly complex supramolecular structures by means of a modular construction kit. For approximately 20 years, the work of Seeman and coworkers [8,27] have been engaged in the rational construction of ID, 2D, and 3D DNA frameworks. They use branched DNA... 

Miniaturization and parallelization key approaches for drug development apparatus for combinatorial chemistry UHTS 1536 titer-plate format modular construction of apparatus applications of UHTS fine-chemical synthesis by micro reactors numbering-up nature as model general advantages of micro flow vision of plants-on-a-desk [233]. 

In recent years there has been a move to assemble sections of plant at the plant manufacturer s site. These modules will include the equipment, structural steel, piping and instrumentation. The modules are then transported to the plant site, by road or sea. The advantages of modular construction are ... 

A fuller discussion of techniques and applications of modular construction is given by Shelley (1990), Hesler (1990), and Whitaker (1984). 

Shelley, S. (1990) Chem. Eng. NY, 97 (Aug.) 30. Making inroads with modular construction. 

Fig. 6. Preparation of [4n + 2] annulenes according to a modular-constructive system...

The cell construction provides (i) a uniform internal distribution of up to four separate electrolytes, (ii) cooling and heating facilities (useful temperature range ca. - 40 °C up to -I- 250 °C), (iii) gas supply, and (iv) different turbulent promotors to improve transport performances. The versatility of off-the-shelf cells, paired with increasing experience of integrating electrolytic cells into industrial processes thus reduces the obstacles and risks for the scale-up. Furthermore, electrochemical units lend themselves well to modular construction, thus CPI plant expansion is a chance for this new technique. 

Fluorescence Instrumentation and Measurements. Fluorescence spectra of the FS samples were obtained on a steady state spectrofluorometer of modular construction with a 1000 W xenon arc lamp and tandem quarter meter excitation monochromator and quarter meter analysis monochromator. The diffraction gratings In the excitation monochromators have blaze angles that allow maximum light transmission at a wavelength of 240 nm. Uncorrected spectra were taken under front-face Illumination with exciting light at 260 nm. Monomer fluorescence was measured at 280 nm and exclmer fluorescence was measured at 330 nm, where there Is no overlap of exclmer and monomer bands. 

Another successful family of ligands is the sugar-based furanoside ligands 4, 19-23 (Fig. 5) [21-23,43,50]. The modular construction of these ligands allows to fine tune (a) the different configurations of the carbohydrate backbone and (b) the steric and electronic properties of the diphosphite substituents. They show excellent enantioselectivity on both the S and R enantiomer of the product (up to 93%) and excellent regioselectivity (up to 98.8%) under mild conditions (Table 2). 

As discussed by Lonsdale , since the 1960s a new technology using synthetic membranes for process separations has been rapidly developed by materials scientists, physical chemists and chemical engineers. Such membrane separations have been widely applied to a range of conventionally difficult separations. They potentially offer the advantages of ambient temperature operation, relatively low capital and running costs, and modular construction. In this chapter, the nature and scope of membrane separation processes are outlined, and then those processes most frequently used industrially are described more fully. 

The suggested bulk material factors are applied to direct equipment costs, whereas the bulk labor factors apply to the corresponding bulk material item. Because the distributive factors are based on larger scale field built plants, FETC applies an additional factory fabrication adjustment to reflect a more modular construction approach requiring less field fabrication as would likely be the case with smaller plant configurations. This approach is illustrated in reference (18). 

One strong point of the phosphoramidite ligands is their modular construction. A generalized cyclometaUated, catalytically active complex K4 is shown in Figure 9.3 possible variations of this structure are indicated by the formulas, and discussed in detail below. 

In many cases the various functions are located on independently folding protein domains, resulting in modularly constructed transcriptional activators. The function of a DNA-binding protein can thus often be deduced from the primary sequence information and from homology with other eucaryotic transcriptional activators. Furthermore, the modular structure of transcriptional activators is the prerequisite for the... 

The climate prohibits the operation and maintenance of outdoor process equipment, therefore, nearly all equipment is inside heated and ventilated buildings. The result Is modular construction of steel frsme buildings in fabrication yards in the lower 48 states with module interconnections made in the field. All facilities are built on gravel pads and the modules are set on piles about 8ft. above the gravel. 

---