Methylene with formaldehyde

The Dimedone (V) in ethanolic solution reacts rapidly with formaldehyde to give methylene-dimedone (VI) which. 

Formaldehyde condenses with itself in an aldol-type reaction to yield lower hydroxy aldehydes, hydroxy ketones, and other hydroxy compounds the reaction is autocatalytic and is favored by alkaline conditions. Condensation with various compounds gives methylol (—CH2OH) and methylene (=CH2) derivatives. The former are usually produced under alkaline or neutral conditions, the latter under acidic conditions or in the vapor phase. In the presence of alkahes, aldehydes and ketones containing a-hydrogen atoms undergo aldol reactions with formaldehyde to form mono- and polymethylol derivatives. Acetaldehyde and 4 moles of formaldehyde give pentaerythritol (PE) ... 

Similarly, nitroben2ene, carbon monoxide, and methanol can react sequentially in the presence of noble metal catalysts, to produce methyl A/-phenylcarbamate [2603-10-3] (4). The phenylcarbamate is subsequently coupled with formaldehyde [50-00-0] to yield the methylenebis(carbamate) (5) which is pyroly2ed to yield methylene diphenyl diisocyanate (MDI) (23). 

For methylene diphenyl diisocyanate (MDI), the initial reaction involves the condensation of aniline [62-53-3] (21) with formaldehyde [50-00-0] to yield a mixture of oligomeric amines (22, where n = 1, 2, 3...). For toluene diisocyanate, amine monomers are prepared by the nitration (qv) of toluene [108-88-3] and subsequent hydrogenation (see Amines byreduction). These materials are converted to the isocyanate, in the majority of the commercial aromatic isocyanate phosgenation processes, using a two-step approach. 

The bulk of 4-methylphenol is used in the production of phenoHc antioxidants. The alkylation of 4-methylphenol with isobutylene under acid catalysis yields 2-/ f2 -butyl-4-methylphenol [2409-55-4] and 2,6-di-/ f2 -butyl-4-methylphenol [128-37-0]. The former condenses with formaldehyde under acid catalysis to yield 2,2 -methylene bis(6-/ f2 -butyl-4-methylphenol) [119-47-1], which is widely used in the stabilization of natural and synthetic mbber (43). The reaction of 2-/ l -butyl-4-methylphenol with sulfur dichloride yields 2,2 -thiobis(6-/ l -butyl-4-methylphenol) [90-66-4]. 

The principal use for 2,6-di-/ f2 -butylphenol is in the production of hindered phenoHc antioxidants and this appHcation accounts for 80—90% of all of this compound produced. Reaction of 2,6-DTBP with formaldehyde under base catalysis forms the methylene bisphenoHc,... 

The reaction of sahcyhc acid with formaldehyde in the presence of catalytic amounts of strong mineral acid results in the condensation product methylene-5,5 -disahcyhc acid [122-25-8] (eq. 4). 

Isohutyhdene Diurea., This is the condensation product of urea and isobutyraldehyde. Unlike the condensation of urea with formaldehyde, which forms a distribution of different UF polymer chain lengths, the reaction of urea with isobutyraldehyde forms a single oligomer. Although similar in chemical stmcture to methylene diurea (MDU), its physical properties are quite different (Table 4). 

An important extension of these reactions is the Mannich reaction, in which aminomethyl-ation is achieved by the combination of formaldehyde, a secondary amine and acetic acid (Scheme 24). The intermediate immonium ion generated from formaldehyde, dimethyl-amine and acetic acid is not sufficiently reactive to aminomethylate furan, but it will form substitution products with alkylfurans. The Mannich reaction appears to be still more limited in its application to thiophene chemistry, although 2-aminomethylthiophene has been prepared by reaction of thiophene with formaldehyde and ammonium chloride. The use of A,iV-dimethyf (methylene) ammonium chloride (Me2N=CH2 CF) has been recommended for the iV,iV-dimethylaminomethylation of thiophenes (83S73). 

Dithiols, like diols, have been protected as 5,5 -methylene, 5,5 -isopropylidene, and 5,5 -benzylidene derivatives, formed by reaction of the dithiol with formaldehyde, acetone, or benzaldehyde, respectively. The methylene and benzylidene derivatives are cleaved by reduction with sodium/ammonia. The isopropylidene and benzylidene derivatives are cleaved by mercury(II) chloride with sodium/ ammonia the isopropylidene derivative is converted to a monothio ether, HSCHR-CHRSCHMe2- ... 

The condensation reaction of resorcinol with formaldehyde, on an equal molar basis and under identical conditions, also proceeds at a rate which is approximately 10 to 15 times faster than that of the equivalent phenol-formaldehyde system [16-18,123]. The high reactivity of the resorcinol-formaldehyde system renders it impossible to have these adhesives in resol form. Therefore, only resorcinol-formaldehyde novolaks, i.e. resins not containing methylol groups can be produced. All the resorcinol nuclei are linked together through methylene... 

Fig. 4. Two 4,6-linked biflavonoid units linked to each other through a methylene ether bridge formed by reaction with formaldehyde.

DFT molecular dynamics simulations were used to investigate the kinetics of the chemical reactions that occur during the induction phase of acid-catalyzed polymerization of 205 [97JA7218]. These calculations support the experimental finding that the induction phase is characterized by the protolysis of 205 followed by a rapid decomposition into two formaldehyde molecules plus a methylenic carbocation (Scheme 135). For the second phase of the polymerization process, a reaction of the protonated 1,3,5-trioxane 208 with formaldehyde yielding 1,3,5,7-tetroxane 209 is discussed (Scheme 136). 

The reaction of polyacrylamide with formaldehyde under acid conditions leads to the formation of a methylene bridge (—CONHCH2—O—CH2NHCO—). 

Since a small amount of water is always present in novolac resins, it has also been suggested that some decomposition of HMTA proceeds by hydrolysis, leading to the elimination of formaldehyde and amino-methylol compounds (Fig. 7.15).42 Phenols can react with the formaldehyde elimination product to extend the novolac chain or form methylene-bridged crosslinks. Alternatively, phenol can react with amino-methylol intermediates in combination with formaldehyde to produce ortho-or para-hydroxybenzylamines (i.e., Mannich-type reactions). 

The reaction of benzoxazine in die presence of 2,6-xylenol does not occur until 135 C, presumably because die hydrogen-bonded intermediate depicted for the 2,4-xylenol reaction (Fig. 7.19) cannot occur. All three types of linkages are obtained in diis case. Para-para methylene-linked 2,6-xylenol dimers, obtained from the reaction of 2,6-xylenol with formaldehyde, formed in the decomposition of the benzoxazine (or with other by-products of that process) dominate. Possible side products from benzoxazine decomposition include formaldehyde and CH2=NH, either of which may provide the source of methylene linkages. Hie amount of ortho-para linkages formed by reaction of 2,6-xylenol with benzoxazine is low. Ortho-ortho methylene-linked products presumably form by a decomposition pathway from benzoxazine (as in Fig. 7.18). 

The Mannich reaction consists in the condensation of formaldehyde with ammonia or a primary or a secondary amine and a compound containing at least one hydrogen atom of pronounced reactivity the active hydrogen atom may be derived from a methylene group activated by a neighbouring keto group, or from a nitroparaffin, or it may be the o- or p-hydrogen atoms in phenols. Thus when acetophenone is boiled in alcoholic solution with formaldehyde and dimethylamine hydrochloride, the Mannich base P-dimethylamino-propiopbenone hydrochloride (I) is readily formed ... 

Formal isomerization of the double bond of testosterone to the 1-position and methylation at the 2-position provides yet another anabolic/androgenic agent. Mannich condensation of the fully saturated androstane derivative 93 with formaldehyde and di-methylamine gives aminoketone 94. A/B-trans steroids normally enolize preferentially toward the 2-position, explaining the regiospecificity of this reaction. Catalytic reduction at elevated temperature affords the 2a-methyl isomer 95. It is not at all unlikely that the reaction proceeds via the 2-methylene intermediate. The observed stereochemistry is no doubt attributable to the fact that the product represents the more stable equatorial isomer. The initial product would be expected to be the p-isomer but this would experience a severe 1,3-diaxial non-bonded interaction and epimerize via the enol. Bromination of the ketone proceeds largely at the tertiary carbon adjacent to the carbonyl (96). Dehydrohalogenation... 

In the next step of the sequence, the authors sought to introduce a hydroxy-methylene substituent at the unsubstituted 7-position of the enone. This bond construction can be carried out by conducting a Baylis-Hillman reaction with formaldehyde. In this instance, the authors used a modification of the Baylis-Hillman reaction which involves the use of a Lewis acid to activate the enone [26]. Under these conditions, the enone 42 is treated with excess paraformaldehyde in the presence of triethylphosphine (1 equiv), lanthanum triflate (5 mol%), and triethanolamine (50 mol%). It is proposed that the lanthanum triflate forms a complex with the triethanolamine. This complex is able to activate the enone toward 1,4-addition of the nucleophilic catalysts (here, triethylphosphine). In the absence of triethanolamine, the Lewis acid catalyst undergoes nonproductive complexation with the nucleophilic catalyst, leading to diminution of catalysis. Under these conditions, the hydroxymethylene derivative 37 was formed in 70 % yield. In the next step of the sequence, the authors sought to conduct a stereoselective epoxidation of the allylic... 

Figure 15.1 Reactions of formaldehyde with peptides and amino acids. Shown are the four types of reaction products seen when peptides or amino acids are treated with formaldehyde in aqueous solution. These reaction products are methylol (hydroxymethyl) adduct (reaction 15.1), Schiff-base (reaction 15.2), 4-imidazolidinone adduct (reaction 15.3), and one type of methylene bridge [cross-link] (reaction 15.4).

Formaldehyde reacts with proteins to form adducts and cross-links.31516 Metz et al.3 have identified three types of chemical modifications after treatment of proteins with formaldehyde (a) methylol (hydroxymethyl) adducts, (b) Schiff bases, and (c) methylene bridges. The reaction of formaldehyde with proteins is summarized in Figure 19.1, but briefly, formaldehyde reacts primarily with lysine and cysteine to form methylol adducts. The methylol adduct can subsequently undergo a dehydration reaction to form a Schiff base. Adducted primary amine and thiol groups can undergo a second reaction with arginine,... 

The above reaction gets repeated thereby forming the trinuclear phenols from the dinuclear phenols. Therefore, the product formed by the reaction of phenol with formaldehyde in the presence of an alkali would be a complex mixture of mono and polynuclear phenols in which the methylene groups link the phenolic nuclei. However, the general structure of a resol may be put as follows ... 

Methylenediamines are readily synthesized from the reaction of secondary amines with formaldehyde. Many aliphatic amines are too basic for direct nitration without a chloride catalyst, and even then, nitrosamine formation can be a problem. Their conversion into intermediate methylenediamines before nitration is therefore a useful route to secondary nitramines. The success of these nitrolysis reactions is attributed to the inherent low basicity of the methylene-diamine nitrogens. 

In this method, first established by Herz and later studied by Hale, hexamine is introduced into fuming nitric acid which has been freed from nitrous acid. The reaction is conducted at 20-30 °C and on completion the reaction mixture is drowned in cold water and the RDX precipitates. The process is, however, very inefficient with some of the methylene and nitrogen groups of the hexamine not used in the formation of RDX. The process of nitrolysis is complex with formaldehyde and some other fragments formed during the reaction undergoing oxidation in the presence of nitric acid. These side-reactions mean that up to eight times the theoretical amount of nitric acid is needed for optimum yields to be attained. 

The cyclization of 128 (R = H) with formaldehyde gave the methylene-bridged bisoxazinones 135 [79ACH(101)61]. The corresponding A/-methyl derivatives (128, R = Me) and formaldehyde yielded the A-methyloxazi-nones 136 [84JCS(P1)2043]. 

---