Metallic oxides modified

Multiple electrodes have been used to obtain selectivity in electrochemical detection. An early example involved the separation of catecholamines from human plasma using a Vydac (The Separation Group Hesperia, CA) SCX cation exchange column eluted with phosphate-EDTA.61 A sensor array using metal oxide-modified surfaces was used with flow injection to analyze multicomponent mixtures of amino acids and sugars.62 An example of the selectivity provided by a multi-electrode system is shown in Figure 2.63... 

Larese, C., Lopez Granados, M., Mariscal, R. et al. (2005) The effect of calcination temperature on the oxygen storage and release properties of Ce02 and Ce—Zr—O metal oxides modified by phosphorus incorporation, Appl. Catal. B Environ., 59, 13. 

Scheme 1. Structural changes in boron centers with increasing levels of Na20 (or other alkali metal oxide) modifier...

Significant improvement of the activity of selectivity of Pd on Si02 could be achieved in the hydrogenation of acetylene by adding Ti, Nd, or Ce oxides to the catalyst.395 The metal oxides modify both geometrically and electronically the Pd surface. They retard the sintering of the dispersed Pd particles, suppress the formation of multiply bound ethylene, and facilitate the desorption of ethylene. The beneficial effect of lead in the hydrogenation of 1,3-butadiene over a Pd-Pb-on-... 

The physicochemical properties of potassium-, bismuth-, phosphorous- and molybdenum-doped (MeA7 atomic ratios of 0 to 1) V2O5/Y-AI2O3 catalysts and their catalytic behavior in the oxidative dehydrogenation of propane have been compared. The incorporation of metal oxides modifies the catalytic behavior of alumina-supported vanadia catalysts by changing both their redox and their acid-base properties. In this way, the addition of potassium leads to the best increase in the selectivity to propylene. This performance can be related to the modification of the acid character of the surface of the catalysts. The possible role of both redox and acid-base properties of catalysts on the selectivity to propylene during the oxidation of propane is also discussed. 

Titanium-pillared montmorillonites (Ti-PILC) modified with tartrates were described as heterogeneous Sharpless epoxidation catalysts [33] as well as for the oxidation of aromatic sulfides [34]. Metal oxides modified with histamine showed modest efficiencies for the kinetic resolution of activated amino acid esters (kj /k5 2) [35]. Silica or alumina treated with diethylaluminium chloride and menthol catalyzed the Diels-Alder reaction between cylopentadiene and methacrolein with modest enantioselectivities of up to 31% ee [36]. ZeoHte HY, modified with chiral sulfoxides had remarkable selectivities for the kinetic resolution of 2-butanol (k /kj =39) but unfortunately the catalyst is not very stable... 

Systematic studies carried out at C.F.R.I. pertainining to catalytic vapour phase synthesis of pyridine bases, namely 2 4-picolines through cyclodehydrogenation reaction of acetaldehyde and anunonia have been described. Metal oxide modified amorphous silica-aliunina and crystalline alumino-silicate namely ZSM-5 zeolites were found to be active and selective catalysts towards the formation of the lower pyridines bases. The method of preparation, pretreatment vis-a-vis the acidity have been found to affect the catalytic activity and selectivity. It is interesting to observe that metal modified crystalline alumino-silicate ZSM-5 is more selective than amorphous silica-alumina for the formation of 2 4-picoline. A plausible reaction mechanism based on the findings of this study has been proposed. 

Heterogeneous photocatalysis for the control of organic volatile compounds in the indoor and outdoor enviromnent is also an active area of research [202]. At the present time, contributions using metal oxide modified with carbon composites are still scarce. A sheet material with Ti02 photocatalyst supported on... 

Metal oxide modified and moisture-cured elastomers Butyl rubber with conjugated olefin residues Britain 1,522,628 1978 Exxon Research... 

Labuda J, Meister A, Glaeser P, Werner G (1998) Metal oxide-modified carbon paste electrodes and microelectrodes for the detection of amino acids and their application to capillary electrophoresis. Fresenius J Anal Chem 360 654-658... 

To prepare metal oxide clusters in molecular sieves, impregnation followed by thermal treatment is the method most fi-equently used. Various metal salts and solvents have been appHed.If the impregnation procedure comprises a chemical reaction between functional groups of the molecular sieve and the oxide precursor, this modification technique is frequently denoted as grafting . In the following, from the enormous amount of literature dealing with metal oxide modified molecular sieves prepared by impregnation, the focus is on those articles that describe in detail the modification procedure and the characterization of the materials produced. Oxides that are formed as intermediates in the preparation of metal clusters in molecular sieves and are not intentionally prepared and studied will not be included in this review. 

---