Metal complexes-polystyrene

Polymer—Cp—MCl complexes have been formed with the Cp-group covalendy bound to a polystyrene bead. The metal complex is uniformly distributed throughout the bead, as shown by electron microprobe x-ray fluorescence. Olefin hydrogenation catalysts were then prepared by reduction with butyl hthium (262). 

A great variety of suitable polymers is accessible by polymerization of vinylic monomers, or by reaction of alcohols or amines with functionalized polymers such as chloromethylat polystyrene or methacryloylchloride. The functionality in the polymer may also a ligand which can bind transition metal complexes. Examples are poly-4-vinylpyridine and triphenylphosphine modified polymers. In all cases of reactively functionalized polymers, the loading with redox active species may also occur after film formation on the electrode surface but it was recognized that such a procedure may lead to inhomogeneous distribution of redox centers in the film... 

Similar films are obtained from powdered molecular sieves loaded with organic molecules Zeolite Y microparticles embedded into a polystyrene film and loaded with appropriately sized transition metal complexes allow selective electron exchange reactions between trapped and mobile species in the film... 

The immobilization of metal catalysts onto sohd supports has become an important research area, as catalyst recovery, recycling as well as product separation is easier under heterogeneous conditions. In this respect, the iron complex of the Schiff base HPPn 15 (HPPn = iVA -bis(o-hydroxyacetophenone) propylene diamine) was supported onto cross-linked chloromethylated polystyrene beads. Interestingly, the supported catalyst showed higher catalytic activity than the free metal complex (Scheme 8) [50, 51]. In terms of chemical stability, particularly with... 

The most frequently used organic supports are polystyrene and styrene-divinylbenzene copolymer beads with functional groups such as diphenylpho.sphine covalently bonded. The polymer-anchored catalyst complex can then be obtained, for example, by displacement of a ligand already co-ordinated to a soluble metal complex (Cornils and Herrmann, 1996) ... 

Conjugated boron polymers containing platimnn or palladium atom in the main chain were also prepared by hydroboration polymerization between tetrayne/ metal complex monomers and tripylborane (scheme 16).30 From gel permeation chromatographic analysis [THF, polystyrene (PSt) standards], the number-average molecular weights of the polymers obtained were found to be 9000. The polymers were soluble in common organic solvents such as THF, chloroform, and benzene. The absorption peaks due to tt-tt transition were observed around 390 nm in the UV-vis spectra of these polymers. The fluorescence emission spectra exhibited intense peaks at 490 nm in chloroform. 

In the early 1970 s, Bayer et al. reported the first use of soluble polymers as supports for the homogeneous catalysts. [52] They used non-crosslinked linear polystyrene (Mw ca. 100 000), which was chloromethylated and converted by treatment with potassium diphenylphosphide into soluble polydiphenyl(styrylmethyl)phosphines. Soluble macromolecular metal complexes were prepared by addition of various metal precursors e.g. [Rh(PPh3)Cl] and [RhH(CO)(PPh3)3]. The first complex was used in the hydrogenation reaction of 1-pentene at 22°C and 1 atm. H2. After 24 h (50% conversion in 3 h) the reaction solution was filtered through a polyamide membrane [53] and the catalysts could be retained quantitatively in the membrane filtration cell. [54] The catalyst was recycled 5 times. Using the second complex, a hydroformylation reaction of 1-pentene was carried out. After 72 h the reaction mixture was filtered through a polyamide membrane and recycled twice. 

Plenio et al. tested an adamantyl phosphine ligand bound to soluble polystyrene (Figure 4.43) in various palladium-catalyzed C-C coupling reactions.[62] The retention of metal complexes of the polymer-bound phosphine ligand were determined to be higher than 99.95%. 

A problem especially with oxidation catalysts is that the metals in their highest oxidation state tend to be less strongly associated with a support, so that the reaction conditions can lead to leaching of the metal complex from the support. To overcome this problem, microencapsulation, as an immobilization technique for metal complexes, has been introduced by Kobayashi and coworkers. In the microencapsulation method, the metal complex is not attached by covalent bonding but is physically enveloped by a thin film of a polymer, usually polystyrene. With this technique leaching of the metal can be prevented. In 2002, Lattanzi and Leadbeater reported on the use of microencapsulated VO(acac)2 for the epoxidation of allylic alcohols. In the presence of TBHP as oxidant, it was possible to oxidize a variety of substrates with medium to good yields (55-96%) and diastereomeric ratios (60/40 to >98/2) (equation 42). The catalyst is easily prepared and can be reused several times without significant loss in activity. 

The nature of the metal complex can have a profound influence on the rate of hydrogenation, and, even in cases where similar complexes have been prepared by different routes, considerable differences in reactivities can be observed. Thus, the effectiveness of rhodium(I) complexes on phosphinated polystyrene decreases in the order, (21, 76) ... 

Polystyrene and its divinylbenzene cross-linked copolymer have been most widely exploited as the polymer support for anchoring metal complexes. A large variety of ligands containing N, P or S have been anchored on the polystyrene-divinylbenzene matrix either by the bromination-lithiation pathway or by direct interaction of the ligand with C1-, Br- or CN-methylated polystyrene-divinyl-benzene network [14] (Fig. 7). 

Support-bound transition metal complexes have mainly been prepared as insoluble catalysts. Table 4.1 lists representative examples of such polymer-bound complexes. Polystyrene-bound molybdenum carbonyl complexes have been prepared for the study of ligand substitution reactions and oxidative eliminations [51], Moreover, well-defined molybdenum, rhodium, and iridium phosphine complexes have been prepared on copolymers of PEG and silica [52]. Several reviews have covered the preparation and application of support-bound reagents, including transition metal complexes [53-59]. Examples of the preparation and uses of organomercury and organo-zinc compounds are discussed in Section 4.1. 

Weakly basic anion exchange Polyamine polystyrene or phenol-formaldehyde 0-9 Anionic metal complexes, amino acids, vitamins... 

The first investigations on iron-catalyzed Michael reactions utilized Fe(acac)3 as catalyst. However, this metal complex is itself catalytically almost inactive. Yields of only up to 63% could be achieved, if BF3OEt2 is used as a co-catalyst [55], Polystyrene-bound Fe(acac)3 catalysts were also reported to give yields up to 63% [56], FeCl3 was used as a co-catalyst for clay-supported Ni(II). Yields achieved with this heterogeneous system ranged from 40 to 98% [57]. The double Michael addition of acrylonitrile to ethyl cyanoacetate is smoothly catalyzed by a complex generated from [Fe(N2) (depe)2] [depe = l,2-bis(diethylphosphano)ethane]. At 23 °C and after 36h, an 88% yield is obtained with 1 mol% of this Fe(0) catalyst [58]. 

Macropolyhedral thiaboranes, preparation, 3, 127 Macroporous polystyrene resins, for metal complex immobilization, 12, 665-666 Macroscale combustion calorimetry, limitations, 1, 611-612... 

Abstract Pressure-sensitive paint (PSP) is applied to the areodynamics measurement. PSP is optical sensor based on the luminescence of dye probe molecules quenching by oxygen gas. Many PSPs are composed of probe dye molecules, such as polycyclic aromatic hydrocarbons (pyrene, pyrene derivative etc.), transition metal complexes (ruthenium(II), osumium(II), iridium(III) etc.), and metalloporphyrins (platinum (II), palladium(II), etc.) immobilized in oxygen permeable polymer (silicone, polystyrene, fluorinated polymer, cellulose derivative, etc.) film. Dye probe molecules adsorbed layer based PSPs such as pyrene derivative and porphyrins directly adsorbed onto anodic oxidised aluminium plat substrate also developed. In this section the properties of various oxygen permeable polymer for matrix and various dye probes for PSP are described. 

Solvent dyes [1] cannot be classified according to a specific chemical type of dyes. Solvent dyes can be found among the azo, disperse, anthraquinone, metal-complex, cationic, and phthalocyanine dyes. The only common characteristic is a chemical structure devoid of sulfonic and carboxylic groups, except for cationic dyes as salts with an organic base as anion. Solvent dyes are basically insoluble in water, but soluble in the different types of solvents. Organic dye salts represent an important type of solvent dyes. Solvent dyes also function as dyes for certain polymers, such as polyacrylonitrile, polystyrene, polymethacrylates, and polyester, in which they are soluble. Polyester dyes are principally disperse dyes (see Section 3.2). 

---