Mesophase-pitch-precursor

Amoco has developed a family of ultra high modulus continuous graphite fibers and preforms with axial thermal conductivity to llOOW/mK. The extremely high thermal conductivity is a direct result of an extremely high degree of crystallinity during carbonization of the mesophase pitch precursor fiber. Table... 

Two categories of pitch-based fiber exist isotropic carbon fiber produced from an isotropic pitch precursor, and an oriented, anisotropic fiber produced from a mesophase pitch precursor. Isotropic fibers were developed from low melting point isotropic pitches The precursor was melt-spun into fibers, which were oxidized to render them infusible, and then carbonized. Their low strengths and moduli make these fibers unsuitable for use in advanced composites. Orientation was accomplished by a hot-stretching process (>2200°C), but it is accompanied by the same processing difficulties encountered in the rayon precursor process. A different approach was suggested by the discovery of carbonaceous mesophase. ... 

Pitches can be transformed to a mesophase state by further chemical and physical operations. Heat treatment of conventional pitches results in additional aromatic polymeriza tion and the distillation of low molecular weight components. This results in an increase in size and concentration of large planar aromatic molecular species whereupon the precursor pitch is transformed to a mesophase state exhibiting the characteristics of nematic Hquid crystals (1). Additional heat treatment converts the mesophase pitch to an infusible aromatic hydrocarbon polymer designated as coke. 

Fibers produced from pitch precursors can be manufactured by heat treating isotropic pitch at 400 to 450°C in an inert environment to transform it into a hquid crystalline state. The pitch is then spun into fibers and allowed to thermoset at 300°C for short periods of time. The fibers are subsequendy carbonized and graphitized at temperatures similar to those used in the manufacture of PAN-based fibers. The isotropic pitch precursor has not proved attractive to industry. However, a process based on anisotropic mesophase pitch (30), in which commercial pitch is spun and polymerized to form the mesophase, which is then melt spun, stabilized in air at about 300°C, carbonized at 1300°C, and graphitized at 3000°C, produces ultrahigh modulus (UHM) carbon fibers. In this process tension is not requited in the stabilization and graphitization stages. 

Because of their unique blend of properties, composites reinforced with high performance carbon fibers find use in many structural applications. However, it is possible to produce carbon fibers with very different properties, depending on the precursor used and processing conditions employed. Commercially, continuous high performance carbon fibers currently are formed from two precursor fibers, polyacrylonitrile (PAN) and mesophase pitch. The PAN-based carbon fiber dominates the ultra-high strength, high temperature fiber market (and represents about 90% of the total carbon fiber production), while the mesophase pitch fibers can achieve stiffnesses and thermal conductivities unsurpassed by any other continuous fiber. This chapter compares the processes, structures, and properties of these two classes of fibers. 

In the years following the Brooks and Taylor discovery, many researchers attempted to produce a mesophase pitch suitable for carbon fiber production. Otani et al. [21] were first to report producing a high-modulus carbon fiber from a "specific pitch-like material." The precursor used was tetrabenzophenazine, and thus, the resulting material might be considered a synthetic pitch. 

Further improvements in the properties of PAN-based carbon fibers are likely to emerge through improved stabilization, that is, by creating the ideally cross-linked fiber. On the other hand, as purer pitch precursors become available, further improvements in mesophase pitch-based carbon fibers are likely to arise from optimized spinnerette designs and enhanced understanding of the relationship between pitch chemistry and its flow/orientation behavior. Of course, the development of new precursors offers the potential to form carbon fibers with a balance of properties ideal for a given application. 

On the other hand, organic materials of relatively low molecular weight such as acetylene, benzene, ethylene and methane, can produce vapour-grown carbon materials by imperfect combustion or by exposing their vapour to a heated substrate in an electric furnace in the presence of a metal catalyst. The latter process generates VGCFs. Other precursors to VGCF include polyacrylonitrile (PAN), isotropic or mesophase pitch, rayon or nylon [8]. 

Since PAN-based carbon fibers tend to be fibrillar in texture, they are unable to develop any extended graphitic structure. Hence, the modulus of a PAN-based fiber is considerably less than the theoretical value (a limit which is nearly achieved by mesophase fibers), as shown in Fig. 9. On the other hand, most commercial PAN-based fibers exhibit higher tensile strengths than mesophase-based fibers. This can be attributed to the fact that the tensile strength of a brittle material is controlled by structural flaws [58], Their extended graphitic structure makes mesophase fibers more prone to this type of flaw. The impure nature of the pitch precursor also contributes to their lower strengths. 

The surface properties of carbon fibers are intimately related to the internal structure of the fiber itself, which needs to be understood if the surface properties are to be modified for specific end applications. Carbon fibers have been made from a number of different precursors, including polyacrylonitrile (PAN), rayon (cellulose) and mesophase pitch. The majority of commercial carbon fibers currently produced are based on PAN, while those based on rayon and pitch are produced in very limited quantities for special applications. Therefore, the discussion of fiber surface treatments in this section is mostly related to PAN-based carbon fibers, unless otherwise specified. 

In templating method, many polymeric precursors including resorcinol-formaldehyde gel,38,40,42,69,70,73"76 furfuryl alcohol,41,49,53, 55 7677 phenolic resin,49 72 74 melamine-formaldehyde resin,69,72 and mesophase pitch,17,45,46,54 etc. are generally used as carbonaceous precursors. The porous carbons are prepared by templating method according to the following procedures ... 

Similarly, PZ pitch as precursor for HPCF was replaced by other mesophase pitches (12). At this point in time, as is well-known, Singer (13) and Lewis (14) of the Union Carbide Corporation developed similar methods. Mesophase carbon fiber progressed more rapidly in the USA than in Japan because Japanese defense and aerospace needs were less demanding. Recently, however, the drive toward higher-added-value products from the heavy fractions of coal and petroleum has intensified, and pitch-based carbon fibers, including HPCF, are now the subjects of extensive investigation in many Japanese laboratories. 

---