Loss definition

The definition of NPSHr may change in the future. A pump is in a definite state of cavitation with the 3% total head loss definition. Many pump users want a more explicit definition of NPSHr, and higher NPSHa safety margins to avoid inadequate NPSHa and cavitation altogether. 

The value objective function is oriented at the company s profit and loss definitions. Guiding principle is to only use value parameters that can be found in the cost controlling of the company signed by controlling. Penalty costs and without currency and weighting factors being applied to steer optimization results but having no actual financial impact - as it can be often found in supply chain optimization models - do not meet this requirement. 

In Fig. 6.4, you can see curves for two FR-4 materials. The traditional FR-4, a 140°CTg material in this case, has a decomposition temperature of 320°C by the 5 percent weight loss definition. The enhanced FR-4 has a decomposition temperature of 350°C by the 5 percent weight loss definition. Many standard high-Tg FR-4 materials actually have decomposition... 

Franklin defined charge as positive or negative in the way we understand the loss or gain of electrons by mechanically rubbing surfaces together. His definition still stands. 

Here, M is a constant, symmetric positive definite mass matrix. We assume without loss of generality that M is simply the identity matrix I. Otherwise, this is achieved by the familiar transformation... 

The definition of polymer thermal stabiUty is not simple owing to the number of measurement techniques, desired properties, and factors that affect each (time, heating rate, atmosphere, etc). The easiest evaluation of thermal stabiUty is by the temperature at which a certain weight loss occurs as observed by thermogravimetric analysis (tga). Early work assigned a 7% loss as the point of stabiUty more recentiy a 10% value or the extrapolated break in the tga curve has been used. A more reaUstic view is to compare weight loss vs time at constant temperature, and better yet is to evaluate property retention time at temperature one set of criteria has been 177°C for 30,000 h, or 240°C for 1000 h, or 538°C for 1 h, or 816°C for 5 min (1). 

In both these continuous processes medium to high energy disperse dyes should be used to avoid the risk of dye subliming to contaminate the atmosphere of the fixation unit and then staining the print by vapor-phase dyeing, or to produce a loss of definition of the printed mark due to diffusion from the appHed thickened paste. 

The presence of tubercles is usually obvious. Friable brown and orange nodular encrustations on mild steel and cast iron cooling water components are almost always tubercles (Figs. 3.12 through 3.14). The presence of a crust, shell, core, cavity, and corroded floor are definitive (Fig. 3.3). Careful analysis can provide considerable information concerning growth, chemical composition, and associated metal loss. 

Establishing the physical and analytical boundaries for a QRA is also a difficult task. Even though you will provide input, the scope definition will largely be made by the QRA project team. Defining the physical boundaries is relatively straightforward, but it does force the QRA team to explicitly identify and account for interfaces that may significantly affect the QRA results. Eor example, analysts often treat a connection to a power supply (e.g., a plug) or a feed source as a physical boundary yet, loss of power or contamination of the feed must be considered in the QRA model. 

Inverters do not output a pure sine wave but synthesize the output wave with pulses. Because of the pulses, harmonics are presented to the motor and, hence, the somewhat higher losses. Common systems are either 6 pulse or 12 pulse. This definition comes from the number of... 

For a simplified case, one can obtain the rate of CL emission, =ft GI /e, where /is a function containing correction parameters of the CL detection system and that takes into account the fact that not all photons generated in the material are emitted due to optical absorption and internal reflection losses q is the radiative recombination efficiency (or internal quantum efficiency) /(, is the electron-beam current and is the electronic charge. This equation indicates that the rate of CL emission is proportional to q, and from the definition of the latter we conclude that in the observed CL intensity one cannot distii pish between radiative and nonradiative processes in a quantitative manner. One should also note that q depends on various factors, such as temperature, the presence of defects, and the... 

The first two are very soluble in water but the last is less so. Weaker bases inelude ammonium hydroxide where X is NH4. In faet every aeid ean generate a base by loss of a proton and the definition now ineludes any eompound eapable of donating eleetron pairs, e.g. amines. Bases turn litmus paper blue and show eharaeteristie effeets on other indieators. They are soluble in water, tarnish in air, and in eoneentrated form are eorrosive to the toueh. Common examples are given in Table 3.5. ... 

To convert the words of the second definition of risk into mathematics, let chance" be probability, "loss" be consequences, and... 

To simplify the effects of radiation and convection on dry heat transfer, the concept of operative temperature is often used. By definition operative temperature is the temperature of a uniform environment (= MRT) that has the same total dry heat loss (convection + radiation) as the actual environment where MRT. 

The indolinol character of eseretholemethine is indicated by the fact that the methiodide on treatment with picric acid yields a diquaternary pierate (m.p. 170°) with the loss of the hydroxyl group. More definite proof is afforded by the oxidation of eseretholemethine with ammoniaeal silver nitrate or potassium ferricyanide, when a dehydroeseretholemethine (oxyeseretholemethine of Polonovski), pierate, m.p. 199°, is produced which is assumed to have formula (VI), since on exhaustive methylation it yields trimethylamine and an unsaturated product (deep-red pierate, m.p. 103°), which absorbs two atoms of hydrogen, forming 5-ethoxy-l 8-dimethyl-S-ethyl-2-indolinone (VII), colourless cubes, m.p. 68°. The... 

From a reliability engineering perspective, error can be defined by analogy with hardware reliability as "The likelihood that the human fails to provide a required system function when called upon to provide that fimction, within a required time period" (Meister, 1966). This definition does not contain any references to why the error occurred, but instead focuses on the consequences of the error for the system (loss or unavailability of a required function). The disadvantage of such a definition is that it fails to consider the wide range of other actions that the human might make, which may have other safety implications for the system, as well as not achieving the required function. 

There are many definitions of the word risk. It is a combination of uncertainty and damage a ratio of Itazards to safeguards a triplet combination of event, probability, and consequences or even a measure of economic loss or human injury in terms of both the incident likelihood and tlie magnitude of the loss or injuiy (AICliE, 1989). People face all kinds of risks eveiyday, some voluntarily and otliers involuntarily. Tlierefore, risk plays a very important role in today s world. Studies on cancer caused a turning point in tlie world of risk because it opened tlie eyes of risk scientists and healtli professionals to tlie world of risk assessments. 

Interconversion between two tautomeric structures can occur via discrete cationic or anionic intermediates (scheme 24, where T is an anion capable of reacting with a proton at a minimum of two distinct sites). Alternatively, interconversion can occur by simultaneous loss and gain of different protons (scheme 25, w here T has the same definition as in scheme 24). These mechanisms are well established for acyclic compounds, but they have been much less thoroughly investigated for heteroaromatic systems. The rate of interconversion of two tautomers is greatest when both of the alternative atoms to which the mobile proton can be attached arc hetero atoms, and isolation of the separate isomers is usually impossible in this case. If one of the alternative atoms involved in the tautomerization is carbon, the rate of interconversion is somewhat slower, but still fast. When both of the atoms in question are carbon, however, interconversion is... 

Martensitic phase transformations are discussed for the last hundred years without loss of actuality. A concise definition of these structural phase transformations has been given by G.B. Olson stating that martensite is a diffusionless, lattice distortive, shear dominant transformation by nucleation and growth . In this work we present ab initio zero temperature calculations for two model systems, FeaNi and CuZn close in concentration to the martensitic region. Iron-nickel is a typical representative of the ferrous alloys with fee bet transition whereas the copper-zink alloy undergoes a transformation from the open to close packed structure. ... 

---