Locating in table

Information regarding the chemical identity of diisopropyl methylphosphonate is located in Table 3-1. 

Information regarding the chemical identity of hydraulic fluid products is located in Table 3-1. This table contains information representative of three types of hydraulic fluids mineral oil, organophosphate ester, and polyalphaolefin. 

Information regarding the physical and chemical properties of hydrogen sulfide is located in Table 3-2. 

The X-ray powder diffraction pattern of (o)-penicillamine was obtained using a Siemens XRD-5000 diffractometer, and the powder pattern is shown in Fig. 1. A summary of the crystallographic data deduced from the pattern of (r>)-penicilla-mine is located in Table 1. 

Hexanc is a very volatile aliphatic hydrocarbon. It is a constituent in the paraffin fraction of crude oil and natural gas and is also used as an industrial chemical and laboratory reagent. Laboratory grade -hexane contains approximately 99% w-hexane. "Hexane" or "hexanes" is a commercial and industrial product consisting of a mixture of hydrocarbons with six carbon atoms and includes -hexane and its isomers 2-methylpentane and 3-methylpentane as well as small amounts of other hydrocarbons (Brugnone et al. 1991). Laboratory and industrial solvents such as "hexane" and petroleum ether contain -hexane from <0.1% to as much as 33% (Creaser et al. 1983). Information regarding the chemical identity of -hexane is located in Table 3-1. 

The stress values in Table IX-1 and Table IX-4 are grouped by materials and product forms, and are for stated temperatures up to the limit provided in para. GR-2.1.2(a). Straight-line interpolation between temperatures is permissible. The temperature intended is the design temperature (see para. IP-2.1.4). Material performance factors located in Tables IX-5 are grouped by material type, material tensile or yield strength, and maximum system design pressure. Straight-line interpolation is permissible. 

Disulfoton is a systemic insecticide/acaricide that belongs to the organophosphate class of pesticides. Pure disulfoton is a colorless oil with low volatility and water solubility, but is readily soluble in most organic solvents (Worthing 1987). Information regarding the physical and chemical properties of disulfoton is located in Table 3-2. 

Information regarding the chemical identity of chloride dioxide and sodium chlorite is located in Table 4-1. Table 4-1 lists common synonyms, trade names, and other pertinent identification information for chloride dioxide and sodium chlorite. 

Information regarding the physical and chemical properties of aluminum is located in Table 3-2. In addition to the compounds listed in Table 3-2, aluminum in the form or alumina (A1203), combined with silica and other chemical compounds is a major component of clay minerals (Dombrowski 1993 Sennett 1993). The large number of types of clays and the variability in their composition make it impossible to include in this document. 

In the first reaction, 393.51 kJ are liberated (exothermic reaction) when 1 mol of gaseous C02 is formed from graphite and oxygen. When 2 mol HI are formed from gaseous hydrogen and solid iodine, there are 52.72 kJ absorbed (endothermic reaction). In the case of the second reaction, the standard heat of formation is +26.36 kJ/mol HI formed the total amount of energy involved in the reaction as written is twice the standard heat of formation because there were two moles of product formed. The reason why AH is the symbol instead of AHf is that the reaction does not address the formation of one mole of product therefore, AHf, which is calculated on a per-mole basis, is not an appropriate symbol for the reaction. Further, notice that the 0 is used in AHj and with other factors (S°, AGp or AE°) to indicate the standard condition of pressure, 1 atm (1 bar), usually 25°C and, for dissolved substances, of concentration 1 molal (refer to Chapter 12). For easy reference, selected standard heats of formation for selected substances are located in Table 7-1 however, notice that there are no elements listed in the table. 

---