Liquid-conducting polymers

Figure 14 Structure formulas of liquid conducting polymers.

Yoshino, K., Novel electrical and optical properties of liquid conducting polymers,/ Trans. Dielectrics Electr. Insul, 1, 353,1994. 

More recently, Raman spectroscopy has been used to investigate the vibrational spectroscopy of polymer Hquid crystals (46) (see Liquid crystalline materials), the kinetics of polymerization (47) (see Kinetic measurements), synthetic polymers and mbbers (48), and stress and strain in fibers and composites (49) (see Composite materials). The relationship between Raman spectra and the stmcture of conjugated and conducting polymers has been reviewed (50,51). In addition, a general review of ft-Raman studies of polymers has been pubUshed (52). 

A very high, price and performance family of polymers called liquid crystal polymers (LCPs) exhibit extremely high mechanical and thermal properties. As their ease of processing and price improve, they may find appHcation in thin-waH, high strength parts such as nails, bolts, and fasteners where metal parts cannot be used for reasons of conductivity, electromagnetic characteristics, or corrosion. 

The first use of ionic liquids in free radical addition polymerization was as an extension to the doping of polymers with simple electrolytes for the preparation of ion-conducting polymers. Several groups have prepared polymers suitable for doping with ambient-temperature ionic liquids, with the aim of producing polymer electrolytes of high ionic conductance. Many of the prepared polymers are related to the ionic liquids employed for example, poly(l-butyl-4-vinylpyridinium bromide) and poly(l-ethyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide [38 1]. 

Noda and Watanabe [42] reported a simple synthetic procedure for the free radical polymerization of vinyl monomers to give conducting polymer electrolyte films. Direct polymerization in the ionic liquid gives transparent, mechanically strong and highly conductive polymer electrolyte films. This was the first time that ambient-temperature ionic liquids had been used as a medium for free radical polymerization of vinyl monomers. The ionic liquids [EMIM][BF4] and [BP][Bp4] (BP is N-butylpyridinium) were used with equimolar amounts of suitable monomers, and polymerization was initiated by prolonged heating (12 hours at 80 °C) with benzoyl... 

As electrochemists, our interest is attracted by the electrochemical properties of materials based on conducting polymers. The study of these properties requires putting a dry material inside an electrolyte. Since most of the electrolytes employed are based on a salt that is first dissolved in a solvent, we will refer to liquid electrolytes. At the end of this chapter we... 

As with all branches of science, polymer chemistry is continually advancing. New topics in polymer chemistry which involve new concepts, new polymers or novel uses for existing materials are being studied in research laboratories throughout the world. In this chapter, some of the more important of these developments are described including the use of polymers in medicine, electronically conducting polymers, and polymer liquid crystals. 

Liquid crystalline solutions as such have not yet found any commercial uses, but highly orientated liquid crystal polymer films are used to store information. The liquid crystal melt is held between two conductive glass plates and the side chains are oriented by an electric field to produce a transparent film. The electric field is turned off and the information inscribed on to the film using a laser. The laser has the effect of heating selected areas of the film above the nematic-isotropic transition temperature. These areas thus become isotropic and scatter light when the film is viewed. Such images remain stable below the glass transition temperature of the polymer. 

Many expensive reductions such as the Birch reduction of naphthalene to isotetralin, benzene to cyclohexene, with metallic sodium and liquid ammonia, or reduction with LiAlHa, can generally be carried out electrochemically at much lower cost and under safe conditions. Electrochemical processes allow fluorinations to be carried out without using fluorine gas. Conducting polymers have been made by electrochemical processes which operate under ambient conditions, and the polymer can be synthesized, doped and shaped in film form in a single step. 

Polymeric conducting systems were also prepared by in situ polymerization of vinyl monomers in ionic liquids [22], with a conductivity of 1 mS/cm. A conductive polymer electrolytes were also prepared by polymerization in liquid EMIm(HF)nF leading to a composite poly(2-hydroxyethyl methacrylate)-EMIm(HF)nF. Recently, polymer electrolytes were prepared in the form of thin foils, by incorporating ionic liquids in a polymer matrix [13-15], Conductivities of polymer-IL or polymer-IL-solvent systems are collected in Table 4. 

A chemical sensor array (consisting of eight conducting polymer sensors) derived from an electronic nose [62], for the characterization of headspace gas from a sparged liquid sample... 

Liquid crystal display technology, 15 113 Liquid crystalline cellulose, 5 384-386 cellulose esters, 5 418 Liquid crystalline conducting polymers (LCCPs), 7 523-524 Liquid crystalline compounds, 15 118 central linkages found in, 15 103 Liquid crystalline materials, 15 81-120 applications of, 15 113-117 availability and safety of, 15 118 in biological systems, 15 111-113 blue phases of, 15 96 bond orientational order of, 15 85 columnar phase of, 15 96 lyotropic liquid crystals, 15 98-101 orientational distribution function and order parameter of, 15 82-85 polymer liquid crystals, 15 107-111 polymorphism in, 15 101-102 positional distribution function and order parameter of, 15 85 structure-property relations in,... 

Kreuer, K. D., Fuchs, A., Ise, M., Spaeth, M. and Maier, J. 1998. Imidazole and pyrazole-based proton conducting polymers and liquids. Electrochimica Acta 43 1281-1288. 

The formation of conducting polymers upon the oxidation of benzene and pyrrole in ionic liquids has also been reported.(2d ). 

Liquid crystal polymers (LCP) are polymers that exhibit liquid crystal characteristics either in solution (lyotropic liquid crystal) or in the melt (thermotropic liquid crystal) [Ballauf, 1989 Finkelmann, 1987 Morgan et al., 1987]. We need to define the liquid crystal state before proceeding. Crystalline solids have three-dimensional, long-range ordering of molecules. The molecules are said to be ordered or oriented with respect to their centers of mass and their molecular axes. The physical properties (e.g., refractive index, electrical conductivity, coefficient of thermal expansion) of a wide variety of crystalline substances vary in different directions. Such substances are referred to as anisotropic substances. Substances that have the same properties in all directions are referred to as isotropic substances. For example, liquids that possess no long-range molecular order in any dimension are described as isotropic. 

A number of other characteristics are required in order to ensure a viable polymeric conductor. Chain orientation is needed to enhance the conducting properties of a polymeric material, especially the intermolecular conduction (i.e., conduction of current from one polymer molecule to another). This is a problem with many of the polymers that are amorphous and show poor orientation. For moderately crystalline or oriented polymers, there is the possibility of achieving the required orientation by mechanical stretching. Liquid crystal polymers would be especially advantageous for electrical conduction because of the high degree of chain orientation that can be achieved. A problem encountered with some doped polymers is a lack of stability. These materials are either oxidants or reductants relative to other compounds, especially water and oxygen. 

In the sheathless interface, the electrical contact is obtained by coating with either a metal [85, 88-90] or a conductive polymer [91] the separation capillary outlet, which is shaped as sharp tip. Also employed are sheathless interfaces in which the electrical contact is established using a metal electrode or a conductive wire inserted into the outlet of the separation capillary [92], A small gap between the separation capillary and the needle of the ionization device filled by a liquid is the approach made to establish the electrical contact in the liquid junction interface [86,87], This arrangement is also realized by making porous through chemical etching the tip [93] or a small section of the wall [94] of the separation capillary at its outlet. 

---