Lead ceramics

Leaded ceramic chip carrier (LDCC), leaded ceramic chip carrier packages include JEDEC types A, B, C, and D. Leaded type B parts are direct soldered to a substrate. Leaded type A parts can be socketed or direct soldered, and include sub-categories leaded ceramic, premolded plastic, and postmolded plastic (which are not designated as LDCC devices). 

Figure 10 compares optical photos of solder joints for a J-lead plastic package for the four lead-free solder alloy compositions described previously, with a J-lead ceramic package attached with tin-lead solder. Figure 11 shows... 

Lead ll) oxide, PbO, exists in two forms as orange-red litharge and yellow massicot. Made by oxidation of Pb followed by rapid cooling (to avoid formation of Pb304). Used in accumulators and also in ceramics, pigments and insecticides. A normal hydroxide is not known but hydrolysis of lead(II) oxyacid salts gives polymeric cationic species, e.g. [Pb OfOH) ] and plumbates are formed with excess base. 

X-ray tubes are used in a broad variety of technical applications the classical application certainly is the radiographic inspection. For the penetration of high-Z materials, relatively high power is required. This lead to the development of X-ray tubes for laboratory and field use of voltages up to 450 kV and cp power up to 4,5 kW. Because of design, performance and reliability reasons, most of these maximum power stationary anode tubes are today made in metal-ceramic technology. 

All these specific needs in this market lead to the metal-ceramic technology as the most economic solution for X-ray tubes. 

As the anodes of the cathode-grounded tubes are cooled through the ceramic insulator, narrower insulators should lead to more heat transferable. For lower voltages, tube designs with twice the actual anode load are feasible. 

Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. Tellurium is used as a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. 

Eig. 9. A typical sonochemical apparatus with dkect immersion ultrasonic horn. Ultrasound can be easily introduced into a chemical reaction with good control of temperature and ambient atmosphere. The usual pie2oelectric ceramic is PZT, a lead 2kconate titanate ceramic. Similar designs for sealed... 

The development of active ceramic-polymer composites was undertaken for underwater hydrophones having hydrostatic piezoelectric coefficients larger than those of the commonly used lead zirconate titanate (PZT) ceramics (60—70). It has been demonstrated that certain composite hydrophone materials are two to three orders of magnitude more sensitive than PZT ceramics while satisfying such other requirements as pressure dependency of sensitivity. The idea of composite ferroelectrics has been extended to other appHcations such as ultrasonic transducers for acoustic imaging, thermistors having both negative and positive temperature coefficients of resistance, and active sound absorbers. 

Trace-element analysis of metals can give indications of the geographic provenance of the material. Both emission spectroscopy (84) and activation analysis (85) have been used for this purpose. Another tool in provenance studies is the measurement of relative abundances of the lead isotopes (86,87). This technique is not restricted to metals, but can be used on any material that contains lead. Finally, for an object cast around a ceramic core, a sample of the core material can be used for thermoluminescence dating. 

---