Ketones, from sulfides

Vinyllithium [917-57-7] can be formed direcdy from vinyl chloride by means of a lithium [7439-93-2] dispersion containing 2 wt % sodium [7440-23-5] at 0—10°C. This compound is a reactive intermediate for the formation of vinyl alcohols from aldehydes, vinyl ketones from organic acids, vinyl sulfides from disulfides, and monosubstituted alkenes from organic halides. It can also be converted to vinylcopper [37616-22-1] or divinylcopper lithium [22903-99-7], which can then be used to introduce a vinyl group stereoselectively into a variety of a, P-unsaturated systems (26), or simply add a vinyl group to other a, P-unsaturated compounds to give y, 5-unsaturated compounds. Vinyllithium reagents can also be converted to secondary alcohols with trialkylb o r ane s. 

Crystallinity of these hexafluoroisopropylidene-unit-containing poly(ketone)s is low except for poly(sulfide ketone) (13). The water contact angle for the fluorine-containing poly(ketone) films is high, being 98° for poly(ether ketone) (11), from 2,2-bis(4-carboxyphenyl)-l,l, l,3,3,3-hexafluoropropane(15) and 96° for poly(sulfide ketone) (13) from 15, whereas it is 78° for poly(ether ketone) from 2,2-bis(4-carboxy-phenyl)propane (16) and 74° for the poly(sulfide ketone) from 16. This result indicates that the substitution of isopropylidene units of poly-(ketone)s with hexafluoroisopropylidene units has a remarkable effect on the surface properties of poly(ketone) films. 

Alkyl- or aryl-dibenzothiophenes are conveniently prepared from the 2-arylthio-cyclohexanones, which are readily cyclized and dehydrogenated to yield the respective 1-, 2-, 3- or 4-substituted dibenzothiophenes (382 equation 9 Section 3.15.2.3.2). More complex polycyclic systems are available, using suitable aryenethiols, such as naph-thalenethiols, and 2-bromo-l-tetralone to synthesize the appropriate 2-arylthio ketones. Diaryl sulfides can be converted to dibenzothiophene derivatives in satisfactory yields by photolysis in the presence of iodine (equation 10) (75S532). Several alkyldibenzothiophenes with substituents in the 2- and/or 3-positions were prepared in satisfactory yield by the condensation of dichloromethyl methyl ether with substituted allylbenzo[6]thiophenes (equation 11) (74JCS(P1)1744). 

Distillation of citrus juices yields two volatile fractions, namely, aqueous essences and essence oils that are separated from each other by condensation of the distillate (7). Aqueous essence, the bottom layer of the condensate is comprised of organic acids, alcohols, aldehydes, esters, hydrocarbons, ketones, hydrogen sulfide, and oxides (10). Considering many components found in both cold-pressed peel oil and aqueous essence, essence oil has a flavor similar to that of the combined peel oil and aqueous essence (10). However, essence oil usually contains a larger amount of... 

Synthesis of aldehydes and ketones from a-heterosubstituted sulfides and selenides and related compounds... 

Ketones from alkenyl sulfoxides. The functional group transformation does not occur with the corresponding sulfides or sulfones. 

The sensor array responses were determined for a series of different volatiles representing the common organic functionalities amines, arenes, alcohols, aldehydes, carboxylic acids, esters, halocarbons, ketones, phosphines, sulfides, and thiols. Each analyte response is represented as the red, green, and blue values of each of the 24 dyes, that is, a 72-dimensional vector. These results suggest that the familial similarities among compounds of the same functionality are exceptional amines, alcohols, aldehydes, esters, and so forth are all easily distinguished from each other. 

N-Chlorosuccinimide dimethyl sulfide triethylamine Corey oxidation Ketones from sec. alcohols... 

The nucleophilic substitution approach was also used by several research groups for syntheses of polysulfides with broad variation of the chemical structure and of the reaction conditions [343-352]. For instance, a poly(thioether-ketone) was prepared from DFBP and dry Na2S with variation of the reaction medium [337]. N-Cyclohexylpyrrolidone was found to yield the highest molecular weights. In another publication random copoly(ketone sulfone sulfide)s were prepared by copolycondensation of 4,4 -dichloro-benzophenone and 4,4 -dichlorodiphenylsulfone with NaSH (222) [344]. The crystallinity was found to depend on the molar fraction of benzophenone moieties. 

Pyridyl)hydrazine (Aldrich), 4-acetylpyridine (Acros), N,N,N -trimethylethylenediamine (Aldrich), methylrhenium trioxide (Aldrich), InQj (Aldrich), Cu(N0j)2-3H20 (Merck), Ni(N03)2-6Il20 (Merck), Yb(OTf)3(Fluka), Sc(OTf)3 (Fluka), 2-(aminomethyl)pyridine (Acros), benzylideneacetone (Aldrich), and chalcone (Aldrich) were of the highest purity available. Borane dimethyl sulfide (2M solution in THE) was obtained from Aldrich. Methyl vinyl ketone was distilled prior to use. Cyclopentadiene was prepared from its dimer immediately before use. (R)-l-acetyl-5-isopropoxy-3-pyrrolin-2-one (4.15) has been kindly provided by Prof H. Hiemstra (University of Amsterdam). 

The problem of the synthesis of highly substituted olefins from ketones according to this principle was solved by D.H.R. Barton. The ketones are first connected to azines by hydrazine and secondly treated with hydrogen sulfide to yield 1,3,4-thiadiazolidines. In this heterocycle the substituents of the prospective olefin are too far from each other to produce problems. Mild oxidation of the hydrazine nitrogens produces d -l,3,4-thiadiazolines. The decisive step of carbon-carbon bond formation is achieved in a thermal reaction a nitrogen molecule is cleaved off and the biradical formed recombines immediately since its two reactive centers are hold together by the sulfur atom. The thiirane (episulfide) can be finally desulfurized by phosphines or phosphites, and the desired olefin is formed. With very large substituents the 1,3,4-thiadiazolidines do not form with hydrazine. In such cases, however, direct thiadiazoline formation from thiones and diazo compounds is often possible, or a thermal reaction between alkylideneazinophosphoranes and thiones may be successful (D.H.R. Barton, 1972, 1974, 1975). 

---