Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ketene acetals preparation

Ketene acetals prepared from fluorinated esters by trimethylsilylation undergo Lewis acid-promoted aldol condensations giving satisfactory yields but low diastereoselectivity [27] (equation 22). [Pg.628]

Rearrangement of allyl trimethylsilyl ketene acetal, prepared by reaction of allylic ester enolates with trimethylsilyl chloride, to yield Y,5-unsaturated carboxylic a-cids. The Ireland-Claisen rearrangement seems to be advantageous to the other variants of the Claisen rearrangement in terms of E/Z geometry control and mild conditions. [Pg.137]

Ketene acetals, preparation, 267, 269 Ketene dimers, depolymerization, 407 reaction with alcohols, 483... [Pg.443]

I.3.2.I. Solvolysis of Halocarbene Adducts of O-Trialkylsilyl Enol Ethers or O-Trialkylsilyl Ketene Acetals Preparation of a,/ -Unsaturated Carbonyl Compounds... [Pg.2347]

The anionic polymerization of methacrylates using a silyl ketene acetal initiator has been termed group-transfer polymerization (GTP). First reported by Du Pont researchers in 1983 (100), group-transfer polymerization allows the control of methacrylate molecular stmcture typical of living polymers, but can be conveniendy mn at room temperature and above. The use of GTP to prepare block polymers, comb-graft polymers, loop polymers, star polymers, and functional polymers has been reported (100,101). [Pg.269]

Ketene di(2-melhoxyethyl) acetal has been obtained by the present method with the use of diethylene glycol dimethyl ether as solvent.3 Other methods for the preparation of ketene acetals include the dehydrohalogenation of a halo acetal with potassium t-butoxide 4 and the reaction of an a-bromo orthoester with metallic sodium.5... [Pg.80]

This synthetic process is applicable to the preparation of other ketene acetal derivatives of /3-alkoxy alcohols. Examples include the ketene acetal derivatives of tetrahydrofurfuryl alcohol and l-methoxy-2-propanol.3 There are a number of advantages in its use, including a simple, time-saving procedure, readily available and inexpensive reagents, and good yields of ketene acetal obtained by a one-step method. [Pg.80]

Compounds of special interest whose preparation is described include 1,2,3-benzothiadiazole 1,1-dioxide (a benzyne precursor under exceptionally mild conditions), bis(l,3-diphenylimida-zolidinylidene-2) (whose chemistry is quite remarkable), 6- di-melhylamino)julvene (a useful intermediate for fused-ring non-benzenoid aromatic compounds), dipkenylcyclopropenone (the synthesis of which is a milestone in theoretical organic chemistry), ketene di(2-melhoxyethyl) acetal (the easiest ketene acetal to prepare), 2-methylcyclopenlane-l,3-dione (a useful intermediate in steroid synthesis), and 2-phenyl-5-oxazolone (an important intermediate in amino acid chemistry). [Pg.145]

The Ireland-Claisen reaction of ( )-vinylsilanes has been applied to the stereoselective synthesis of syn- and c/nti-2-substituted 3-silyl alkcnoic acids. a R-2-Alkyl-3-silyl acids are prepared by rearrangement of ( )-silyl ketene acetals which are generated in situ from the kinetically formed (Z)-enolate of the corresponding propionate ester40. Chelation directs the stereochemistry of enolization of heteroelement-substituted acetates in such a way that the syn-diastereomers are invariably formed on rearrangement403. [Pg.345]

High enantioselectivities may be reached using the kinetic controlled Michael addition of achiral tin enolates, prepared in situ, to a,/i-unsaturated carbonyl compounds catalyzed by a chiral amine. The presence of trimethylsilyl trifluoromethanesulfonate as an activator is required in these reactions236. Some typical results, using stoichiometric amounts of chiral amine and various enolates are given below. In the case of the l-(melhylthio)-l-[(trimethylsilyl)thio]ethene it is proposed that metal exchange between the tin(II) trifluoromethanesulfonate and the ketene acetal occurs prior to the 1,4-addition237,395. [Pg.985]

To a solution of LDA in THF prepared as above and cooled to -78 °C was added the ester RCH2C02Me over 5 min with stirring, which was continued at —78°C for a further 30min. Excess TMSC1 (0.25mol) was added over 5 min, and the reaction mixture was allowed to come to ambient temperature. Isolation as above followed by distillation gave the product ketene acetal, ca. 90%. [Pg.61]

Neier and coworkers have shown that piperidine diones (e.g., 105) can be prepared stereoselectively using a cascade Diels-Alder/acylation reaction of ketene acetal 104 <96T(52)11643>. [Pg.241]

Because the condensation between a diketene acetal and a diol proceeds without the evolution of volatile byproducts, this method allows the preparation of dense, crossUnked materials by using reagents having a functionality greater than 2 (15). Even though either or both the ketene acetal and alcohol could have functionalities greater than 2, only triols were investigated because the synthesis of trifunctional ketene acetals is extremely difficult. [Pg.127]

However, in subsequent work it was found that carboxylic acid groups readily add to ketene acetals to form carboxyortho ester linkages (24). These are very labile linkages and on hydrolysis regenerate the carboxylic acid group which then exerts its catalytic function. Because carboxylic acids add so readily to ketene acetals, very labile polymers can be prepared by the addition of diacids to diketene acetals. The utilization of such polymers is currently under investigation. [Pg.137]

A ketene acetal-terminated prepolymer was first prepared from 2 eq of the diketene acetal 3,9-bis(ethylidene-2,4,8,10-tetraoxaspiro-[5,5]undecane) and 1 eq of the diol 3-raethyl-l,5-pentanediol and. then 30 wt% levonorgestrel, 7 wt% Mg(OH)2j and a 30 mole% excess of 1,2,6-hexanetriol mixed into the prepolymer. This mixture was then extruded into rods and cured. Erosion and drug release from these devices was studied by implanting the rod-shaped devices subcutaneously into rabbits, explanting at various time intervals, and measuring weight loss and residual drug (15). [Pg.143]

World Health Organization 10th Annual Report, 1981, pp. 62-63. World Health Organization 11th Annual Report, 1982, p. 61. Heller, J., Penhale, D. W. H., and Helwing, R. F., Preparation of poly(ortho esters) by the reaction of ketene acetals and polyols, J. Polym. Sci., Polym. Lett. Ed., 18, 82-83, 1980. [Pg.159]

Hepatite Virus NS3/4A having the pyrrolidine-5,5-trans-lactam skeleton [83], starting from (R)- and (S)-methionine, respectively. The key step is the addition of the proper silyl ketene acetal to an iminium ion, e.g., that generated by treatment of the intermediate 177 with boron trifluoride, which provided the adduct 178 with better diastereoselectivity than other Lewis acids. Inhibitors of hepatitis C virus NS3/4A were efficiently prepared by a similar route from (S)-methionine [83]. The addition of indole to a chiral (z-amino iminium ion was a completely diastereoselective step in a reported synthesis of tilivalline, a natural molecule which displays strong cytotoxicity towards mouse leukemia L 1210 [84]. [Pg.33]

The stereochemistry of the silyl ketene acetal can be controlled by the conditions of preparation. The base that is usually used for enolate formation is lithium diisopropyl-amide (LDA). If the enolate is prepared in pure THF, the F-enolate is generated and this stereochemistry is maintained in the silyl derivative. The preferential formation of the F-enolate can be explained in terms of a cyclic TS in which the proton is abstracted from the stereoelectronically preferred orientation perpendicular to the carbonyl plane. The carboxy substituent is oriented away from the alkyl groups on the amide base. [Pg.568]

Tocopheryl)propionic acid (50) is one of the rare examples that the o-QM 3 is involved in a direct synthesis rather than as a nonintentionally used intermediate or byproduct. ZnCl2-catalyzed, inverse hetero-Diels-Alder reaction between ortho-qui-none methide 3 and an excess of <2-methyl-C,<9-bis-(trimethylsilyl)ketene acetal provided the acid in fair yields (Fig. 6.37).67 The o-QM 3 was prepared in situ by thermal degradation of 5a-bromo-a-tocopherol (46). The primary cyclization product, an ortho-ester derivative, was not isolated, but immediately hydrolyzed to methyl 3-(5-tocopheryl)-2-trimethylsilyl-propionate, subsequently desilylated, and finally hydrolyzed into 50. [Pg.199]

Notably, the Mukaiyama aldol/lactonizahon approach has been used in the total synthesis of panclicin D (2-258) [139b,c] and okinonellin B (2-261) (Scheme 2.61) [139d]. In the synthesis of 2-258, aldehyde 2-254 and the ketene acetal 2-255 were used to prepare the 3-lactone 2-256 with high simple and induced diastereoselectivity. There follows an esterification with the carboxylic acid 2-257. For the synthesis of 2-261, the aldehydes 2-259 and 2-252b were employed as substrates leading initially to the (1-lac tone 2-260. [Pg.87]

Other non-traditional preparations of 1,2,3-triazoles have been reported. The rearrangement in dioxane/water of (Z)-arylhydrazones of 5-amino-3-benzoyl-l,2,4-oxadiazole into (2-aryl-5-phenyl-27/-l,2,3-triazol-4-yl)ureas was investigated mechanistically in terms of substituents on different pathways <06JOC5616>. A general and efficient method for the preparation of 2,4-diary 1-1,2,3-triazoles 140 from a-hydroxyacetophenones 139 and arylhydrazines is reported <06SC2461>. 5-Alkylamino-] //-], 2,3-triazoles were obtained by base-mediated cleavage of cycloadducts of azides to cyclic ketene acetals <06S1943>. Oxidation of N-... [Pg.229]

The first synthesis of a cyclopropenone was reported in 1959 by Breslowls who achieved the preparation of diphenyl cyclopropenone (11) by reacting phenyl ketene dimethylacetal with benzal chloride/K-tert.-butoxide. The phenyl chloro carbene primarily generated adds to the electron-rich ketene acetal double bond to form the chlorocyclopropanone ketal 9, which undergoes 0-elimination of HC1 to diphenyl cyclopropenone ketal 10. Final hydrolysis yields 11 as a well-defined compound which is stable up to the melting point (120—121 °C). [Pg.12]

Ketene acetals and dithioacetals have been prepared in a solvent-free procedure by base catalyzed / -elimination under PTC conditions. The yields obtained by use of irradiation are much higher than those obtained by use of ultrasound or conventional heating under the same conditions [82] (Scheme 8.58). [Pg.280]

The ter/.-butyl alcohol is refluxed over quicklime, distilled, and then redistilled over 1 g. of potassium per 100 g. of the alcohol. Improved yields of ketene acetal are obtained from tert.-butyl alcohol that has been recovered from a previous preparation of the acetal. [Pg.23]

Ketene acetal may be prepared by the action of potassium terl-butoxide on iodoacetal5 or bromoacetal.4... [Pg.87]


See other pages where Ketene acetals preparation is mentioned: [Pg.130]    [Pg.151]    [Pg.59]    [Pg.130]    [Pg.151]    [Pg.59]    [Pg.88]    [Pg.776]    [Pg.151]    [Pg.1282]    [Pg.371]    [Pg.248]   
See also in sourсe #XX -- [ Pg.2 , Pg.605 ]

See also in sourсe #XX -- [ Pg.605 ]

See also in sourсe #XX -- [ Pg.605 ]

See also in sourсe #XX -- [ Pg.2 , Pg.605 ]

See also in sourсe #XX -- [ Pg.605 ]




SEARCH



Acetals preparation

Acetates preparation

Acetic acid, iododifluorosilyl ketene acetal preparation

Keten acetal

Ketene acetal

Ketene preparation

Ketenes acetals

Silyl Enol Ethers and Ketene Acetals Preparation

© 2024 chempedia.info