Isopropyl stabilization

It is also apparent that the degree of stabilization generally follows the order isopropyl < ethyl < methyl, except for electropositive substituents such as Li and BH2 where the order is reversed. These trends, noted by others , will be explained in due course. It is worth noting that calculated and experimental isopropyl stabilizations... 

Aluminum complex greases, obtained by the reaction of aluminum isopropylate with a mixture of benzoic acid and fatty acids. These greases have a remarkable resistance to water, very good adhesion to metallic surfaces, good mechanical stability properties and resistance to temperature. They are less common than the first two types. 

Organophosphorus compounds. Phosphorus-carbon bond fonnation takes place by the reaction of various phosphorus compounds containing a P—H bond with halides or tritlates. Alkylaryl- or alkenylalkylphosphinates are prepared from alkylphosphinate[638]. The optically active isopropyl alkenyl-methylphosphinate 778 is prepared from isopropyl methylphosphinate with retention[639]. The monoaryl and symmetrical and asymmetric diarylphosphi-nates 780, 781, and 782 are prepared by the reaction of the unstable methyl phosphinate 779 with different amounts of aryl iodides. Tnmethyl orthoformate is added to stabilize the methyl phosphinate[640]. 

A rule of thumb is that a C=C substituent stabilizes a carbocation about as well as two methyl groups Al though allyl cation (H2C=CHCH2 ) is a primary carbocation it is about as stable as a typical secondary carbocation such as isopropyl cation (CH3)2CH-"... 

All alkyl groups not just methyl are activating substituents and ortho para direc tors This IS because any alkyl group be it methyl ethyl isopropyl tert butyl or any other stabilizes a carbocation site to which it is directly attached When R = alkyl... 

Hydroxyethyl cellulose (HEC), a nonionic thickening agent, is prepared from alkali cellulose and ethylene oxide in the presence of isopropyl alcohol (46). HEC is used in drilling muds, but more commonly in completion fluids where its acid-degradable nature is advantageous. Magnesium oxide stabilizes the viscosity-building action of HEC in salt brines up to 135°C (47). HEC concentrations are ca 0.6—6 kg/m (0.2—21b/bbl). 

Aqueous solutions can be stabilized against viscosity loss by addition of 5—10 wt % anhydrous isopropyl alcohol, ethanol, ethylene glycol, or propylene glycol. The manganous ion (Mn " ) also is an effective stabilizer at concentrations of 10 -10 wt% of the solution. 

When )3-scission can occur in the radical, further reactions compete with acid amide formation. Thus oxaziridine (112) with iron(II) ion and acid yields stabilization products of the isopropyl radical. If a-hydrogen is present in the Af-alkyl group, radical attack on this position in (113) occurs additionally according to the pattern of liquid phase decomposition. 

Imidazole, 1 -hydroxy-2,4,5-triphenyl-3-oxides reactions, S, 455 Imidazole, iodo-nitrodehalogenation, 5, 396-397 Imidazole, 1-iodo-reactions, S, 454 stability, S, 110 Imidazole, 2-iodo-synthesis, S, 401 Imidazole, N-iodo-, S, 393 reactions, 5, 454 Imidazole, 4-iodo-5-methyl-iodination, 5, 400 Imidazole, 2-isopropyl-4-nitro-N-nitration, 5, 351 Imidazole, 2-lithio-reactions, S, 106, 448 Imidazole, 2-mercapto-l-methyl-as antithyroid drug, 1, 171 mass spectra, 5, 358 Imidazole, 1-methoxymethyl-acylation, S, 402 Imidazole, 5-methoxy-l-methyl-reactions... 

Acyl radicals can fragment with toss of carbon monoxide. Decarbonylation is slower than decarboxylation, but the rate also depends on the stability of the radical that is formed. For example, when reaction of isobutyraldehyde with carbon tetrachloride is initiated by t-butyl peroxide, both isopropyl chloride and isobutyroyl chloride are formed. Decarbonylation is competitive with the chlorine-atom abstraction. 

The initial reaction between a ketene and an enamine is apparently a 1,2 cycloaddition to form an aminocyclobutanone adduct (58) (68-76a). This reaction probably occurs by way of an ionic zwitterion intermediate (75). The thermal stability of this adduct depends upon the nature of substituents Rj, R2, R3, and R. The enolic forms of 58 can exist only if Rj and/or R4 are hydrogens. If the enamine involved in the reaction is an aldehydic enamine with no 3 hydrogens and the ketene involved is di-substituted (i.e., R, R2, R3, and R4 are not hydrogens), then the cyclo-butanone adduct is thermally stable. For example, the reaction of dimethyl-ketene (61) with N,N-dimethylaminoisobutene (10) in isopropyl acetate... 

The isobutyl sulfonate was examined as a replacement for the isopropyl sulfonate, which had undesirable stability properties. Cleavage occurs with 2 eq. of Bu4N I and proceeds much more readily than cleavage of the isopropyl sulfonate. ... 

However, experiments in the gas phase gave different results. In reactions of OH with alkyltrimethylsilanes, it is possible for either R or Me to cleave. Since the R or Me comes off as a carbanion or incipient carbanion, the product ratio RH/MeH can be used to establish the relative stabilities of various R groups. From these experiments, a stability order of neopentyl > cyclopropyl > rcrt-butyl > n-pro-pyl > methyl > isopropyl > ethyl was found. On the other hand, in a different kind of gas-phase experiment, Graul and Squires were able to observe CHi ions, but not the ethyl, isopropyl, or (ert-butyl ions. 

Reagents. Perylene was obtained from Sigma Chemical Company (St. Louis, Missouri). All other PAHs were supplied by Aldrich Chemical Company (Milwaukee, Wisconsin) and were reported to contain less that 3% impurities. All PAHs were used without further purification. Isopropyl ether (99%) for extraction work was also purchased from Aldrich. Hydroquinone, a fluorescent stabilizer present in the ether, was removed prior to solution preparation by rotary evaporation. Fluorometric-grade 1-butanol was supplied by Fisher Scientific Company (Fair Lawn, New Jersey). All solutions for extractions of PAHs were prepared by evaporating portions of a stock cyclohexane solution and diluting to the appropriate volume with isopropyl ether. Fluorescence measurements were performed on 1 10 dilutions of the stock and final organic phase solutions. The effect of dissolved CDx on the fluorescence intensity of the organic phase PAH was minimized by dilution with isopropyl ether. 

In degree 2 only reactivity degrees are treated vis- i-vis exothermic polymerization in particular and addition reactions on the double bond (ethylene, butadiene, styrene, propylene), easy peroxidation (isopropyl oxide, acetaldehyde), hydrolysis (acetic anhydride). Possibly only propionitrile and substances with code 0 have an actual NFPA stability code. Every time one has to deal with the NFPA code one has to interpret it after carefully reading the paragraphs in Part Two. 

---