Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Isopropyl acetate alcohol

Olefins add anhydrous acetic acid to give esters, usually of secondary or tertiary alcohols propjiene [115-07-1] yields isopropyl acetate [108-21-4], isobutjiene [115-11-7] gives tert-huty acetate [540-88-5]. Minute amounts of water inhibit the reaction. Unsaturated esters can be prepared by a combined oxidative esterification over a platinum group metal catalyst. Eor example, ethylene-air-acetic acid passed over a palladium—Hthium acetate catalyst yields vinyl acetate. [Pg.66]

Ketones and esters are required for C-type inks. Types of esters are ethyl acetate, isopropyl acetate, normal propyl acetate, and butyl acetate. From the ketone class, acetone or methyl ethyl ketone (MEK) can be used. The usual solvent for D-type inks are mixtures of an alcohol, such as ethyl alcohol or isopropyl alcohol, with either aUphatic or aromatic hydrocarbons. Commonly used mixtures are 50/50 blends by volume of alcohol and aUphatic hydrocarbon. [Pg.252]

PMMA is not affected by most inorganic solutions, mineral oils, animal oils, low concentrations of alcohols paraffins, olefins, amines, alkyl monohahdes and ahphatic hydrocarbons and higher esters, ie, >10 carbon atoms. However, PMMA is attacked by lower esters, eg, ethyl acetate, isopropyl acetate aromatic hydrocarbons, eg, benzene, toluene, xylene phenols, eg, cresol, carboHc acid aryl hahdes, eg, chlorobenzene, bromobenzene ahphatic acids, eg, butyric acid, acetic acid alkyl polyhaHdes, eg, ethylene dichloride, methylene chloride high concentrations of alcohols, eg, methanol, ethanol 2-propanol and high concentrations of alkahes and oxidizing agents. [Pg.262]

Chemical. The use of isopropyl alcohol as a feedstock for the production of acetone is expected to remain stable, as the dominant process for acetone is cumene oxidation. Isopropyl alcohol is also consumed in the production of other chemicals such as methyl isobutyl ketone, methyl isobutyl carbinol [108-11-2] isopropjlamine, and isopropyl acetate. The use of diisopropyl ether as a fuel ether may become a significant oudet for isopropyl alcohol. [Pg.113]

Isopropyl acetate [108-22-5] M 102.1, b 88.4 , d 0.873, n 1.3773. Washed with 50% aq K2CO3 (to remove acid), then with saturated aq CaCl2 (to remove any alcohol). Dried with CaCl2 and fractionally distd. [Pg.274]

Isophorone diisocyanate Isopropoxyethanol Isopropyl acetate Isopropyl alcohol Isopropylamine N-lsopropylaniline Isopropyl chloroformate Isopropyl ether... [Pg.162]

Isoamyl acetate Isoamyl alcohol Isobutyl acetate Isobutyl alcohol Isophorone Isopropyl acetate Isopropyl alcohol Isopropylamine Isopropyl ether Isopropyl glycidyl ether Kaolin Ketene... [Pg.379]

About 50% of isopropanol use is to produce acetone. Other important synthetic uses are to produce esters of many acids, such as acetic (isopropyl acetate, solvent for cellulose nitrate), myristic, and oleic acids (used in lipsticks and lubricants). Isopropylpalmitate is used as an emulsifier for cosmetic materials. Isopropyl alcohol is a solvent for alkaloids, essential oils, and cellulose derivatives. [Pg.229]

Acetone, THF, methanol, ethyl acetate, isopropyl acetate, isopropyl alcohol, ethanol, n-propyl alcohol, toluene, and 2-methoxyethanol... [Pg.307]

EINECS 203-468-6, see Ethylenediamine EINECS 203-470-7, see Allyl alcohol EINECS 203-472-8, see Chloroacetaldehyde EINECS 203-481-7, see Methyl formate EINECS 203-523-4, see 2-Methylpentane EINECS 203-528-1, see 2-Pentanone EINECS 203-544-9, see 1-Nitropropane EINECS 203-545-4, see Vinyl acetate EINECS 203-548-0, see 2,4-Dimethylpentane EINECS 203-550-1, see 4-Methyl-2-pentanone EINECS 203-558-5, see Diisopropylamine EINECS 203-560-6, see Isopropyl ether EINECS 203-561-1, see Isopropyl acetate EINECS 203-564-8, see Acetic anhydride EINECS 203-571-6, see Maleic anhydride EINECS 203-576-3, see m-Xylene EINECS 203-598-3, see Bis(2-chloroisopropyl) ether EINECS 203-604-4, see 1,3,5-Trimethylbenzene EINECS 203-608-6, see 1,3,5-Trichlorobenzene EINECS 203-620-1, see Diisobutyl ketone EINECS 203-621-7, see sec-Hexyl acetate EINECS 203-623-8, see Bromobenzene EINECS 203-624-3, see Methylcyclohexane EINECS 203-625-9, see Toluene EINECS 203-628-5, see Chlorobenzene EINECS 203-630-6, see Cyclohexanol EINECS 203-632-7, see Phenol EINECS 203-686-1, see Propyl acetate EINECS 203-692-4, see Pentane EINECS 203-694-5, see 1-Pentene EINECS 203-695-0, see cis-2-Pentene EINECS 203-699-2, see Butylamine EINECS 203-713-7, see Methyl cellosolve EINECS 203-714-2, see Methylal EINECS 203-716-3, see Diethylamine EINECS 203-721-0, see Ethyl formate EINECS 203-726-8, see Tetrahydrofuran EINECS 203-729-4, see Thiophene EINECS 203-767-1, see 2-Heptanone EINECS 203-772-9, see Methyl cellosolve acetate EINECS 203-777-6, see Hexane EINECS 203-799-6, see 2-Chloroethyl vinyl ether EINECS 203-804-1, see 2-Ethoxyethanol EINECS 203-806-2, see Cyclohexane EINECS 203-807-8, see Cyclohexene EINECS 203-809-9, see Pyridine EINECS 203-815-1, see Morpholine EINECS 203-839-2, see 2-Ethoxyethyl acetate EINECS 203-870-1, see Bis(2-chloroethyl) ether EINECS 203-892-1, see Octane EINECS 203-893-7, see 1-Octene EINECS 203-905-0, see 2-Butoxyethanol EINECS 203-913-4, see Nonane EINECS 203-920-2, see Bis(2-chloroethoxy)methane EINECS 203-967-9, see Dodecane EINECS 204-066-3, see 2-Methylpropene EINECS 204-112-2, see Triphenyl phosphate EINECS 204-211-0, see Bis(2-ethylhexyl) phthalate EINECS 204-258-7, see l,3-Dichloro-5,5-dimethylhydantoin... [Pg.1482]

Propyl acetate, see Isopropyl acetate Propylacetone, see 2-Hexanone Propyl alcohol, see 1-Propanol... [Pg.1506]

UN 1206, see 3,3-Dimethylpentane Heptane UN 1208, see 2,2-Dimethylbutane, 2,3-Dimethylbutane, Hexane, 2-Methylpentane UN 1212, see Isobutyl alcohol UN 1213, see Isobutyl acetate UN 1218, see 2-Methyl-l,3-butadiene UN 1220, see Isopropyl acetate UN 1221, see Isopropylamine UN 1224, see 3-Heptanone, 2-Hexanone, Isophorone UN 1229, see Mesityl oxide UN 1230, see Methanol UN 1231, see Methyl acetate UN 1232, see 2-Butanone UN 1233, see sec-Hexyl acetate... [Pg.1514]

Isocyanatopropane, see Atrazine Isofenphos oxon, see Isofenphos Isoheptane, see PCB-1242 Isohexane, see PCB-1242 Isononane, see PCB-1242 Isononanes, see Octane Isooctane, see PCB-1242 Isooctanes, see Octane Isophthalic acid, see ro-Xylene Isopropoxyphenol, see ProDoxnr Isopropyl alcohol, see Isopropyl acetate Isopropylatnide, see Bentazone IV-Isopropylaniline, see Propachlor Isopropylbenzene, see Propylbenzene, PCB-1242,... [Pg.1534]

Compound Name N-Propyl Mercaptan Isopropyl Mercaptan N-Propyl Mercaptan Isopropyl Mercaptan Glycerine Propionic Acic Propionic Anhydride N-Propyl Alcohol Isopropyl Alcohol Beta-Propiolactone Acetone Acrolein Allyl Alcohol Acrylamide Propylene Propylene Oxide Polypropylene Acrylic Acid Beta-Propiolactone Propionaldehyde Propionic Acid Propionaldehyde Propionic Anhydride Beta-Propiolactone Propionic Anhydride N-Propyl Acetate Isopropyl Acetate N-Propyl Alcohol Isopropyl Alcohol N-Propyl Alcohol Propionaldehyde N-Butyl Alcohol Propylene... [Pg.79]

Insoluble Sodium Metaphosphate, 52 Insoluble Sodium Polyphosphate, 52 Isoamyl Alcohol, 78 Isoamyl Benzoate, 78 Isoamyl Butyrate, 78 Isoamyl Phenyl Acetate, 78 Isoamyl Salicylate, 78 Isobutyl Cinnamate, 78 Isobutyl Isovalerate, 84 Isobutyraldehyde, 78 DL-Isoleucine, 30 L-Isoleucine, 31 Isopropyl Acetate, 80... [Pg.114]

The alcohol (1.5 L, 208 g, 280 mmol) in THF is charged to a jacketed flask followed by dimethyl sulfide (37 g, 590 mmol) and diisopropylethylamine (47 g, 364 mmol). The solution is cooled to approximately -13 °C. 7V-Chlorosuccinimide (NCC 71 g, 532 mmol) is dissolved in THF (240 mL) and added to the flask at a rate so as to maintain the internal temperature at -11 to -13 °C. The mixture is then stirred at -15 5 °C for 3 h. Isopropyl acetate (3 L) is added followed by 0.5 N NaOH (1.2 L). The mixture is warmed to room temperature and stirred for 1 h. The organic layer is washed with 5% NaCl (2 x 600 mL) and brine (2 x 600 mL). The product layer is concentrated under vacuum to obtain, at first, a yellow amorphous solid which when dried under high vacuum turns into a white foam. Slurrying the solid in warm water followed by filtration and drying afforded 196 g (94%) of the 3-ketomacrolide as a white solid after trituration with 10% EtOAc/heptane. [Pg.84]

See other pages where Isopropyl acetate alcohol is mentioned: [Pg.106]    [Pg.778]    [Pg.182]    [Pg.243]    [Pg.250]    [Pg.441]    [Pg.213]    [Pg.385]    [Pg.74]    [Pg.281]    [Pg.69]    [Pg.625]    [Pg.379]    [Pg.29]   
See also in sourсe #XX -- [ Pg.24 , Pg.50 , Pg.189 ]



SEARCH



Acetals alcohols

Alcohols acetates

Isopropyl acetate

Isopropyl alcohol

© 2024 chempedia.info