Isopropenyl alcohol

Various methods have been developed to shift the equilibrium between esterification and hydrolysis toward the ester formation.6 For example, as an acetyl donor, vinyl acetate and isopropenyl acetate have been used because the resulting unnecessary alcohol, vinyl or isopropenyl alcohol, spontaneously changes to the corresponding aldehyde or ketone as shown in Figure 6(c).6a... 

In the flask were placed 1.50 mol of the isopropenyl ether (conmercially available) and 0.10 mol of the (dry) acetylenic alcohol (also commercially available), and in the dropping funnel 0.4 mol of the latter compound. The mixture was cooled to 0°C and 100 mg of anhydrous p-toluenesulfonic acid were added with stirring. 

With aldehydes, primary alcohols readily form acetals, RCH(OR )2. Acetone also forms acetals (often called ketals), (CH2)2C(OR)2, in an exothermic reaction, but the equiUbrium concentration is small at ambient temperature. However, the methyl acetal of acetone, 2,2-dimethoxypropane [77-76-9] was once made commercially by reaction with methanol at low temperature for use as a gasoline additive (5). Isopropenyl methyl ether [116-11-OJ, useful as a hydroxyl blocking agent in urethane and epoxy polymer chemistry (6), is obtained in good yield by thermal pyrolysis of 2,2-dimethoxypropane. With other primary, secondary, and tertiary alcohols, the equiUbrium is progressively less favorable to the formation of ketals, in that order. However, acetals of acetone with other primary and secondary alcohols, and of other ketones, can be made from 2,2-dimethoxypropane by transacetalation procedures (7,8). Because they hydroly2e extensively, ketals of primary and especially secondary alcohols are effective water scavengers. 

The aggregation pheromone of the boU weevil, Jinthonomusgrandis is a mixture of the alcohols D-i7j -2-isopropenyl-l-methylcyclobutaneethanol [30820-22-5] (168) and OT-3,3-dimethyl-A, p-cyclohexaneethanol [26532-23-0] (169) and of the cis- and trans-isomers of the aldehyde of the latter (170). The pheromone is marketed as grandlure [11104-05-5] for monitoring and removal trapping of boU weevil populations. 

With a secure route to pentacyclic amine 2, the completion of the total synthesis of 1 requires only a few functional group manipulations. When a solution of 2 in ethanol is exposed to Pd-C in an atmosphere of hydrogen, the isopropenyl double bond is saturated. When a small quantity of HCI is added to this mixture, the hydro-genolysis of the benzyl ether is accelerated dramatically, giving alcohol 15 in a yield of 96%. Oxidation of the primary alcohol in 15 with an excess of Jones reagent, followed by Fischer esterification, gives ( )-methyl homosecodaphniphyllate [( )-1] in an overall yield of 85 % from 2. 

Hence, enol esters such as isopropenyl acetate are good acylating agents for alcohols. Isopropenyl acetate can also be used to convert other ketones to the corresponding enol acetates in an exchange reaction ... 

Isocyano-2-methylpropane, 55, 96 Isophorone,57,113 Isopropenyl acetate,. 57, 113 Isopropyl alcohol, 5t8, 78, 157... 

Intramolecular oxonium ylide formation is assumed to initialize the copper-catalyzed transformation of a, (3-epoxy diazomethyl ketones 341 to olefins 342 in the presence of an alcohol 333 . The reaction may be described as an intramolecular oxygen transfer from the epoxide ring to the carbenoid carbon atom, yielding a p,y-unsaturated a-ketoaldehyde which is then acetalized. A detailed reaction mechanism has been proposed. In some cases, the oxonium-ylide pathway gives rise to additional products when the reaction is catalyzed by copper powder. If, on the other hand, diazoketones of type 341 are heated in the presence of olefins (e.g. styrene, cyclohexene, cyclopen-tene, but not isopropenyl acetate or 2,3-dimethyl-2-butene) and palladium(II) acetate, intermolecular cyclopropanation rather than oxonium ylide derived chemistry takes place 334 ). 

The isopropenyl side chain may derive by elimination of a tertiary alcohol or ether as in 202. Such a masking of the olefin avoids a possible competing vinylcyclopropane rearrangement. The correspondence of the cyclopentene of 202 with the vinylcyclopropane in 203 now becomes obvious. The presence of the dimethylcarbinol side chain now also offers the opportunity for its introduction by addition of a cyclopropyl anion to acetone. The feasibility of creating such an anion by fluoride initiated desilylation... 

Saunders et al. reported the DKR system for secondary alcohols using Cp lr complexes bearing a NHC ligand as racemization catalysts [47]. As shown in Scheme 5.15, the reaction of racemic 1-phenylethanol with isopropenyl acetate in the presence of catalyst 22 (0.1mol% Ir) and Novozyme 435 at 70 °C for 8h gave... 

Furthermore, the reaction of allyl alcohols 67 and vinyl or isopropenyl acetates 68 was reported to afford y,5-unsaturated carbonyl compounds 70 (Equahon 10.13) [29]. 

The superfluous carbonyl oxygen atom was removed by carbonyl reduction to provide the alcohol 171, subsequent Chugaev elimination (via 172 to 173) and double bond hydrogenation with in situ generated diimide (Scheme 27) [94]. The isopropenyl double bond was finally re-established by reductive cleavage of the a-bromo ether unit in 173 to afford the fully functionalized enantiomerically pure A-ring building block (162). 

DKR of secondary alcohol is achieved by coupling enzyme-catalyzed resolution with metal-catalyzed racemization. For efficient DKR, these catalyhc reactions must be compatible with each other. In the case of DKR of secondary alcohol with the lipase-ruthenium combinahon, the use of a proper acyl donor (required for enzymatic reaction) is parhcularly crucial because metal catalyst can react with the acyl donor or its deacylated form. Popular vinyl acetate is incompatible with all the ruthenium complexes, while isopropenyl acetate can be used with most monomeric ruthenium complexes. p-Chlorophenyl acetate (PCPA) is the best acyl donor for use with dimeric ruthenium complex 1. On the other hand, reaction temperature is another crucial factor. Many enzymes lose their activities at elevated temperatures. Thus, the racemizahon catalyst should show good catalytic efficiency at room temperature to be combined with these enzymes. One representative example is subtilisin. This enzyme rapidly loses catalytic activities at elevated temperatures and gradually even at ambient temperature. It therefore is compatible with the racemization catalysts 6-9, showing good activities at ambient temperature. In case the racemization catalyst requires an elevated temperature, CALB is the best counterpart. 

We synthesized 8 by the one-step reaction of [Ph4(Tl -C4CO)]Ru(CO)3 with benzyl chloride. In contrast to previous alcohol racemization catalysts, 8 was stable in the air during racemization [30]. The racemization was performed even under 1 atm of molecular oxygen. Thus, alcohol DKR was for the first time possible with 8 in the air at room temperature (R)-l-phenylethyl acetate (99% yield, greater than 99%e.e.) was obtained from 1-phenylethanol by using 4mol% of 8, CALB and isopropenyl acetate in the presence of potassium phosphate (Scheme 1.22). This catalyst system was effective for both benzylic and aliphatic alcohols. The synthetic method for 8 was applied to the preparation of a polymer-bound derivative (9). Hydroxymethyl polystyrene was reacted with 4-(chloromethyl)benzoyl chloride to... 

Using a similar approach, Chechik and Crooks (73), modified the PAMAM dendrimer-encapsulated palladium nanoparticles with perfluoropolyether tails utilizing non-covalent ion-pair interactions. The catalytic hydrogenation of six substrates under biphasic conditions (toluene/ perfluoro-2-butyltetrahydrofuran FC-75) was investigated. Allyl alcohol, methyl acrylate, vinyl isopropenyl ether, and... 

Contrary to our explanation, it was assumed that a very fast rotation of the isopropenyl groups of 75 and 77 is responsible for the nonoccurrence of 79 and 80, respectively.187 Since 16 and 19 give rise to about 40 a, of alcohols 24,25, and 28,29, respectively, this explanation does not seem to be valid. 

Many such activated acyl derivatives have been developed, and the field has been reviewed [7-9]. The most commonly used irreversible acyl donors are various types of vinyl esters. During the acylation of the enzyme, vinyl alcohols are liberated, which rapidly tautomerize to non-nucleophilic carbonyl compounds (Scheme 4.5). The acyl-enzyme then reacts with the racemic nucleophile (e.g., an alcohol or amine). Many vinyl esters and isopropenyl acetate are commercially available, and others can be made from vinyl and isopropenyl acetate by Lewis acid- or palladium-catalyzed reactions with acids [10-12] or from transition metal-catalyzed additions to acetylenes [13-15]. If ethoxyacetylene is used in such reactions, R1 in the resulting acyl donor will be OEt (Scheme 4.5), and hence the end product from the acyl donor leaving group will be the innocuous ethyl acetate [16]. Other frequently used acylation agents that act as more or less irreversible acyl donors are the easily prepared 2,2,2-trifluoro- and 2,2,2-trichloro-ethyl esters [17-23]. Less frequently used are oxime esters and cyanomethyl ester [7]. S-ethyl thioesters such as the thiooctanoate has also been used, and here the ethanethiol formed is allowed to evaporate to displace the equilibrium [24, 25]. Some anhydrides can also serve as irreversible acyl donors. 

Below -ester products 85-92 via CALB-catalyzed acylation of rac-alcohols, isopropenyl acetate, room temp, until 50% conversion. Then Mitsunobu reaction ( DIAD, TPP, CH3COOH, ether 0 -> 20 °C, 24 h) ... 

---