Isomerization of acyls

Fig. 11.1. Regio-isomerization of acyl glucuronides. Migration of the /3-1-acyl group from C(l) to C(2) by intramolecular nucleophilic attack. Migration can continue to C(3) and then C(4). Such reactions are usually competitive with chemical hydrolysis [25][26],... 

It should be noted that the structures assigned by von Auwers to these acylpyrazoles are not strictly proved. His attempts to confirm structure by a comparison of molecular refractions156 are scarcely conclusive, as often the exaltations of a pair of isomers are practically the same.153 The isomerism of acyl derivatives was considered in detail by von Auwers,83,86,156,281 but the data often seem quite contradictory. 

Relative susceptibility of isocyanide and carbonyl ligands to insertion depends on reaction systems. The greater thermodynamic stability of the iminoacyl complexes than the acyl complexes was demonstrated by thermal isomerization of acyl(isocyanide)molybdenum to iminoacyl(carbonyl)molybdenum complexes (Eq. 7.13) [94]. 

Apart from Bronsted acid activation, the acetyl cation (and other acyl ions) can also be activated by Lewis acids. Although the 1 1 CH3COX-AIX3 Friedel-Crafts complex is inactive for the isomerization of alkanes, a system with two (or more) equivalents of AIX3 was fonnd by Volpin to be extremely reactive, also bringing abont other electrophilic reactions. 

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

Pubhcations have described the use of HFPO to prepare acyl fluorides (53), fluoroketones (54), fluorinated heterocycles (55), as well as serving as a source of difluorocarbene for the synthesis of numerous cycHc and acycHc compounds (56). The isomerization of HFPO to hexafluoroacetone by hydrogen fluoride has been used as part of a one-pot synthesis of bisphenol AF (57). HFPO has been used as the starting material for the preparation of optically active perfluorinated acids (58). The nmr spectmm of HFPO is given in Reference 59. The molecular stmcture of HFPO has been deterrnined by gas-phase electron diffraction (13). 

The synthesis of 2,4-dihydroxyacetophenone [89-84-9] (21) by acylation reactions of resorcinol has been extensively studied. The reaction is performed using acetic anhydride (104), acetyl chloride (105), or acetic acid (106). The esterification of resorcinol by acetic anhydride followed by the isomerization of the diacetate intermediate has also been described in the presence of zinc chloride (107). Alkylation of resorcinol can be carried out using ethers (108), olefins (109), or alcohols (110). The catalysts which are generally used include sulfuric acid, phosphoric and polyphosphoric acids, acidic resins, or aluminum and iron derivatives. 2-Chlororesorcinol [6201-65-1] (22) is obtained by a sulfonation—chloration—desulfonation technique (111). 1,2,4-Trihydroxybenzene [533-73-3] (23) is obtained by hydroxylation of resorcinol using hydrogen peroxide (112) or peracids (113). 

Similarly, no systematic study of the IR spectra of the pyridopyridazines has been recorded, but the spectra of the [2,3-d] derivatives have been discussed <68AJCl29l). The diones of this series have also been studied <69MI21501), and IR used to distinguish between the structure (303) and the possible isomeric formulation (304) <74JHC35l). The IR spectra of some of the azodicarboxylic ester adducts <79X2027) have been recorded, whilst in the benzo fused systems some problems with the structure of acyl derivatives in the pyridazino[4,5-6]quinoline series have been resolved with the help of IR spectroscopy <71BSF906, 72BSF1588). 

Acyl-pyrroles, -furans and -thiophenes in general have a similar pattern of reactivity to benzenoid ketones. Acyl groups in 2,5-disubstituted derivatives are sometimes displaced during the course of electrophilic substitution reactions. iV-Alkyl-2-acylpyrroles are converted by strong anhydrous acid to A-alkyl-3-acylpyrroles. Similar treatment of N-unsubstituted 2- or 3-acyIpyrroles yields an equilibrium mixture of 2- and 3-acylpyrroles pyrrolecarbaldehydes also afford isomeric mixtures 81JOC839). The probable mechanism of these rearrangements is shown in Scheme 65. A similar mechanism has been proposed for the isomerization of acetylindoles. 

Azoles containing a free NH group react comparatively readily with acyl halides. N-Acyl-pyrazoles, -imidazoles, etc. can be prepared by reaction sequences of either type (66) -> (67) or type (70)->(71) or (72). Such reactions have been carried out with benzoyl halides, sulfonyl halides, isocyanates, isothiocyanates and chloroformates. Reactions occur under Schotten-Baumann conditions or in inert solvents. When two isomeric products could result, only the thermodynamically stable one is usually obtained because the acylation reactions are reversible and the products interconvert readily. Thus benzotriazole forms 1-acyl derivatives (99) which preserve the Kekule resonance of the benzene ring and are therefore more stable than the isomeric 2-acyl derivatives. Acylation of pyrazoles also usually gives the more stable isomer as the sole product (66AHCi6)347). The imidazole-catalyzed hydrolysis of esters can be classified as an electrophilic attack on the multiply bonded imidazole nitrogen. 

Isomerization of 3-cephems (27) to 2-cephems (28) takes place in the presence of organic bases (e.g. pyridine) and is most facile when the carboxyl is esterified. Normally an equilibrium mixture of 3 7 (3-cephem/2-cephem) is reached. Since the 2-cephem isomers are not active as antibacterial agents, the rearrangement proved to be an undesirable side reaction that complicated acylation of the C-7 amine under certain conditions. A method for converting such mixtures to the desired 3-cephem isomer involves oxidation with concomitant rearrangement to the 3-cephem sulfoxide followed by reduction. Additions... 

The formation of an enamine from an a,a-disubstituted cyclopentanone and its reaction with methyl acrylate was used in a synthesis of clovene (JOS). In a synthetic route to aspidospermine, a cyclic enamine reacted with methyl acrylate to form an imonium salt, which regenerated a new cyclic enamine and allowed a subsequent internal enamine acylation reaction (309,310). The required cyclic enamine could not be obtained in this instance by base isomerization of the allylic amine precursor, but was obtained by mercuric acetate oxidation of its reduction product. Condensation of a dihydronaphthalene carboxylic ester with an enamine has also been reported (311). 

Professor D Auria (Basilicata University) summarizes the photochemical isomerization of pentaatomic heterocycles, providing a unified description in terms of the five conceivable mechanisms. R. Alan Aitken and Andrew W. Thomas of the University of St. Andrews, Scotland, summarize the substantial recent progress in heterocyclic acyl and formyl anion equivalents. 

Other thietane derivatives have been obtained by isomerization of nitrogen-containing heterocycles. The reaction of an acyl isothiocyanate (RCONCS) with diphenyldiazomethane gave 20 and this isomerized in solution to the tetraphenyl-3-thietanone 21 <96BSB253>. Additionally, the isoxazolidine 22 was converted into 23 by the action of trimethylsilyl iodide and zinc iodide <96H1211>. 

Sulphated zirconia catalysts can be acidic or superacidic depending on the method of treatment. A variety of acid-catalysed reactions, referred to earlier in this section, can be carried out with sulphated zirconia. Yadav and Nair (1999) have given a state-of-the art review on this subject. Examples of benzylation of benzene with benzyl chloride / benzyl alcohol, alkylation of o-xylene with. styrene, alkylation of diphenyl oxide with 1-dodecene, isomerization of epoxides to aldehydes, acylation of benzene / chlorobenzene with p-chloro benzoylchloride, etc. are covered in the review. 

Since Bruce s pioneering work in the area of ruthenium vinylidene chemistry (1), it has been well known that isomerization of a terminal alkyne to a vinylidene on a metal center is not only favorable but also effects a reversal in the reactivity of the carbon atoms. However, hydration catalysis was not possible, because alkyl migration from a proposed acyl intermediate led to an... 

Treatment of the elimination product 107 with triethylamine resulted in smooth isomerization of the olefin, to afford the a,p-unsaturated ketone 108. Ally lie oxidation of 108 then generated the secondary alcohol 109 in 72 % yield. The acetonide and silyl ether functions of 109 were cleaved in one reaction to afford a tetraol intermediate that was regioselectively acylated at the secondary alcohol functions, to provide the triacetate 110 in high yield (89 %). Hydrogenolysis of the benzyl ether... 

Zeolites have also been described as efficient catalysts for acylation,11 for the preparation of acetals,12 and proved to be useful for acetal hydrolysis13 or intramolecular lactonization of hydroxyalkanoic acids,14 to name a few examples of their application. A number of isomerizations and skeletal rearrangements promoted by these porous materials have also been reported. From these, we can underline two important industrial processes such as the isomerization of xylenes,2 and the Beckmann rearrangement of cyclohexanone oxime to e-caprolactam,15 which is an intermediate for polyamide manufacture. Other applications include the conversion of n-butane to isobutane,16 Fries rearrangement of phenyl esters,17 or the rearrangement of epoxides to carbonyl compounds.18... 

The formation of triazoles by acid-catalyzed ring opening and isomerization of various other C4-substituted sydnones has also been explored <2001MI769>. When applied to 3-(2-acetylphenyl)sydnone, conditions that are successful for C4 acylation of other 3-arylsydnones result unexpectedly in the formation of the jV-acctyl-3-methylindazole 72. Initial protonation of the carbonyl in the ortho-acetyl group triggers attack by the N2 position of the sydnone ring and concludes with hydrolysis and loss of carbon dioxide (Equation 3) <1996SC2757>. 

An alternative route to nonracemic a-alkoxy stannanes entails the reduction of acyl stannanes with chiral hydrides61 62. Accordingly, conjugated stannyl enones yield (S)-a-alkoxy allylic stannanes by reduction with (J )-(+)-BINAL-H. As expected, (S)-(—)-BINAL-H gives rise to the enantiomeric (7 )-a-alkoxy allylic stannanes (equation 29)61. Upon treatment with Lewis acids, these stannanes undergo a stereospecific anti 1,3-isomerization to the (Z)-y-alkoxy allylic stannanes61. 

Convincing evidence was found that the majority of acyclic aldo-nitrones exist in the Z-form, by investigating the ASIS-effect (aromatic solvent induced shift effect) (399). However, in some cases, specified by structural factors and solvent, the presence of both isomers has been revealed. Thus, in C -acyl-nitrones the existence of Z -and -isomers was detected. Their ratio appears to be heavily dependant on the solvent polar solvents stabilize Z-isomers and nonpolar, E-isomers (399). A similar situation was observed in a- methoxy-A-tert-butylnitrones. In acetone, the more polar Z-isomer was observed, whereas in chloroform, the less polar E-isomer prevailed. The isomer assignments were made on the basis of the Nuclear Overhauser Effect (NOE) (398). /Z-Isomerization of acylnitrones can occur upon treatment with Lewis acids, such as, MgBr2 (397). Another reason for isomerization is free rotation with respect to the C-N bond in adduct (218) resulting from the reversible addition of MeOH to the C=N bond (Scheme 2.74). The increase of the electron acceptor character of the substituent contributes to the process (135). 

In the Pd-catalyzed cross-coupling reactions of acylzirconocene chlorides with allylic halides and/or acetates (Section 5.4.4.4), the isolation of the expected p,y-unsaturated ketone is hampered by the formation of the a, P-un saturated ketone, which arises from isomerization of the p,y-double bond. This undesirable formation of the unsaturated ketone can be avoided by the use of a Cu(I) catalyst instead of a Pd catalyst [35], Most Cu(I) salts, with the exception of CuBr - SMe2, can be used as efficient catalysts Thus the reactions of acylzirconocene chlorides with allyl compounds (Table 5 8 and Scheme 5 30) or propargyl halides (Table 5.9) in the presence of a catalytic amount (10 mol%) of Cu(I) in DMF or THF are completed within 1 h at 0°C to give ffie acyl--allyl or acyl-allenyl coupled products, respectively, in good yields. ill... 

Silyl esters have also been transformed successfully [137] another example reports the O-acylation of serine with a /l-alkynyl carboxylic acid anhydride accompanied by an in situ isomerization of the alkyne to the allene [138],... 

It has been known for years that the activated residues of acyl- and peptidylamino acids enantiomerize during coupling (1.9). However, the racemization tests available (see section 4.9) did not allow for a valid comparison of the tendency of residues to isomerize because they incorporated a variety of aminolyzing residues and N-substituents. Valid demonstration of the different sensitivities of residues was provided by classical work on the synthesis of insulin. It was found that a 16-residue segment with O-tert-butyltyrosine at the carboxy terminus produced 25% of epimer in HOBt-assisted DCC-mediated coupling in dimethylformamide, and the same segment with leucine at the carboxy terminus produced no epimer. Only when series such as Z-Gly-Xaa-OH coupled with valine benzyl ester became available was it possible to compare many residues with confidence. Unfortunately, it transpires that the issue is extremely complex. 

FIGURE 6.10 The side chain of histidine is readily acylated (A) by activated residues. The imidazolide produced is an activated species similar to the intermediate generated by reaction (B) of a carboxylic acid with coupling reagent carbonyldiimidazole. (Staab, 1956). Imida-zolides acylate amino and hydroxyl groups. Isomerization of histidyl during activation results from abstraction (C) of the a-proton by the 7t-nitrogen. 

Lace bugs in the genus Corythucha produce the isomeric 2-acyl-3,6-dihy-droxy-2-cyclohexene-l-ones, with a different pattern of oxygenation [45, 51, 52]. These were synthesized from 1,3-cyclohexanedione 11 (Scheme 3), with key steps being acylation to give 12, protection of the 1,3-dicarbonyl as the isox-... 

---